P2P

This document describes an experimental use case that employs autonomic networking for the monitoring of Service Level Agreements (SLAs). The use case is for detecting violations of SLAs in a distributed fashion. It strives to optimize and dynamically adapt the autonomic deployment of active measurement probes in a way that maximizes the likelihood of detecting service-level violations with a given resource budget to perform active measurements. This optimization and adaptation should be done without any outside guidance or intervention.

This document is a product of the IRTF Network Management Research Group (NMRG). It is published for informational purposes.

This document defines a REsource LOcation And Discovery (RELOAD) Usage for managing shared write access to RELOAD Resources. Shared Resources in RELOAD (ShaRe) form a basic primitive for enabling various coordination and notification schemes among distributed peers. Access in ShaRe is controlled by a hierarchical trust delegation scheme maintained within an access list. A new USER-CHAIN-ACL access policy allows authorized peers to write a Shared Resource without owning its corresponding certificate. This specification also adds mechanisms to store Resources with a variable name that is useful whenever peer-independent rendezvous processes are required.

This document defines a SIP Usage for REsource LOcation And Discovery (RELOAD). The SIP Usage provides the functionality of a SIP proxy or registrar in a fully distributed system and includes a lookup service for Address of Records (AORs) stored in the overlay. It also defines Globally Routable User Agent URIs (GRUUs) that allow the registrations to map an AOR to a specific node reachable through the overlay. After such initial contact of a Peer, the RELOAD AppAttach method is used to establish a direct connection between nodes through which SIP messages are exchanged.

This document considers the consequences of moving the underlying network architecture from the current Internet to an Information- Centric Networking (ICN) architecture on video distribution. As most of the traffic in future networks is expected to be video, we consider how to modify the existing video streaming mechanisms. Several important topics related to video distribution over ICN are presented. The wide range of scenarios covered includes the following: evolving Dynamic Adaptive Streaming over HTTP (DASH) to work over ICN and leverage the recent ISO/IEC Moving Picture Experts Group (MPEG) standard, layering encoding over ICN, introducing distinct requirements for video using Peer-to-Peer (P2P) mechanisms, adapting the Peer-to-Peer Streaming Protocol (PPSP) for ICN, creating more stringent requirements over ICN because of delay constraints added by Internet Protocol Television (IPTV), and managing digital rights in ICN. Finally, in addition to considering how existing mechanisms would be impacted by ICN, this document lists some research issues to design ICN-specific video streaming mechanisms.

This document defines concepts and terminology for using the Session Initiation Protocol in a peer-to-peer environment where the traditional proxy-registrar and message-routing functions are replaced by a distributed mechanism. These mechanisms may be implemented using a Distributed Hash Table or other distributed data mechanism with similar external properties. This document includes a high-level view of the functional relationships between the network elements defined herein, a conceptual model of operations, and an outline of the related problems addressed by the P2PSIP working group, the REsource LOcation And Discovery (RELOAD) protocol, and the SIP usage document defined by the working group.

This document specifies the base Peer-to-Peer Streaming Tracker Protocol (PPSTP) version 1, an application-layer control (signaling) protocol for the exchange of meta information between trackers and peers. The specification outlines the architecture of the protocol and its functionality; it also describes message flows, message processing instructions, message formats, formal syntax, and semantics. The PPSTP enables cooperating peers to form content-streaming overlay networks to support near real-time delivery of structured media content (audio, video, and associated timed text and metadata), such as adaptive multi-rate, layered (scalable), and multi-view (3D) videos in live, time-shifted, and on-demand modes.

This document describes mechanisms for Peer-to-Peer (P2P) overlay diagnostics. It defines extensions to the REsource LOcation And Discovery (RELOAD) base protocol to collect diagnostic information and details the protocol specifications for these extensions. Useful diagnostic information for connection and node status monitoring is also defined. The document also describes the usage scenarios and provides examples of how these methods are used to perform diagnostics.

The Peer-to-Peer Streaming Peer Protocol (PPSPP) is a protocol for disseminating the same content to a group of interested parties in a streaming fashion. PPSPP supports streaming of both prerecorded (on- demand) and live audio/video content. It is based on the peer-to- peer paradigm, where clients consuming the content are put on equal footing with the servers initially providing the content, to create a system where everyone can potentially provide upload bandwidth. It has been designed to provide short time-till-playback for the end user and to prevent disruption of the streams by malicious peers. PPSPP has also been designed to be flexible and extensible. It can use different mechanisms to optimize peer uploading, prevent freeriding, and work with different peer discovery schemes (centralized trackers or Distributed Hash Tables). It supports multiple methods for content integrity protection and chunk addressing. Designed as a generic protocol that can run on top of various transport protocols, it currently runs on top of UDP using Low Extra Delay Background Transport (LEDBAT) for congestion control.

This memo describes how to use Adobe's Secure Real-Time Media Flow Protocol (RTMFP) to transport the video, audio, and data messages of Adobe Flash platform communications. Aspects of this application profile include cryptographic methods and data formats, flow metadata formats, and protocol details for client-server and peer-to-peer communication.

REsource LOcation And Discovery (RELOAD) does not define a generic service discovery mechanism as a part of the base protocol (RFC 6940). This document defines how the Recursive Distributed Rendezvous (ReDiR) service discovery mechanism can be applied to RELOAD overlays to provide a generic service discovery mechanism.

REsource LOcation And Discovery (RELOAD) is a peer-to-peer (P2P) signaling protocol that provides an overlay network service. Peers in a RELOAD overlay network collectively run an overlay algorithm to organize the overlay and to store and retrieve data. This document describes how the default topology plugin of RELOAD can be extended to support self-tuning, that is, to adapt to changing operating conditions such as churn and network size.

This document defines an optional extension to the REsource LOcation And Discovery (RELOAD) protocol to support the direct response routing mode. RELOAD recommends symmetric recursive routing for routing messages. The new optional extension provides a shorter route for responses, thereby reducing overhead on intermediate peers. This document also describes potential cases where this extension can be used.

This document defines an optional extension to the REsource LOcation And Discovery (RELOAD) protocol to support the relay peer routing mode. RELOAD recommends symmetric recursive routing for routing messages. The new optional extension provides a shorter route for responses, thereby reducing overhead on intermediate peers. This document also describes potential cases where this extension can be used.

The IETF Transparent Interconnection of Lots of Links (TRILL) protocol supports arbitrary link technologies between TRILL switches, including point-to-point links and multi-access Local Area Network (LAN) links that can have multiple TRILL switches and end stations attached. TRILL uses Intermediate System to Intermediate System (IS-IS) routing. This document specifies the establishment, reporting, and termination of IS-IS adjacencies between TRILL switches, also known as RBridges (Routing Bridges). It also concerns four other link-local aspects of TRILL: Designated RBridge (DRB) selection, MTU (Maximum Transmission Unit) testing, pseudonode creation, and BFD (Bidirectional Forwarding Detection) session bootstrapping in connection with adjacency. State diagrams are included where appropriate. This document obsoletes RFC 6327 and updates RFC 6325.

This specification defines REsource LOcation And Discovery (RELOAD), a peer-to-peer (P2P) signaling protocol for use on the Internet. A P2P signaling protocol provides its clients with an abstract storage and messaging service between a set of cooperating peers that form the overlay network. RELOAD is designed to support a P2P Session Initiation Protocol (P2PSIP) network, but can be utilized by other applications with similar requirements by defining new usages that specify the Kinds of data that need to be stored for a particular application. RELOAD defines a security model based on a certificate enrollment service that provides unique identities. NAT traversal is a fundamental service of the protocol. RELOAD also allows access from "client" nodes that do not need to route traffic or store data for others.

This document is the HIP-Based Overlay Networking Environment (HIP BONE) instance specification for the REsource LOcation And Discovery (RELOAD) protocol. The document provides the details needed to build a RELOAD-based overlay that uses HIP.

Group communication services exist in a large variety of flavors and technical implementations at different protocol layers. Multicast data distribution is most efficiently performed on the lowest available layer, but a heterogeneous deployment status of multicast technologies throughout the Internet requires an adaptive service binding at runtime. Today, it is difficult to write an application that runs everywhere and at the same time makes use of the most efficient multicast service available in the network. Facing robustness requirements, developers are frequently forced to use a stable upper-layer protocol provided by the application itself. This document describes a common multicast API that is suitable for transparent communication in underlay and overlay and that grants access to the different flavors of multicast. It proposes an abstract naming scheme that uses multicast URIs, and it discusses mapping mechanisms between different namespaces and distribution technologies. Additionally, this document describes the application of this API for building gateways that interconnect current Multicast Domains throughout the Internet. It reports on an implementation of the programming Interface, including service middleware. This document is a product of the Scalable Adaptive Multicast (SAM) Research Group.

Content distribution applications, such as those employing peer-to-peer (P2P) technologies, are widely used on the Internet and make up a large portion of the traffic in many networks. Often, however, content distribution applications use network resources inefficiently. One way to improve efficiency is to introduce storage capabilities within the network and enable cooperation between end-host and in-network content distribution mechanisms. This is the capability provided by a DECoupled Application Data Enroute (DECADE) system, which is introduced in this document. DECADE enables applications to take advantage of in-network storage when distributing data objects as opposed to using solely end-to-end resources. This document presents the underlying principles and key functionalities of such a system and illustrates operation through a set of examples.

Peer-to-Peer (P2P) streaming systems becoming more and more popular on the Internet, and most of them are using proprietary protocols. This document identifies problems associated with proprietary protocols; proposes the development of the Peer-to-Peer Streaming Protocol (PPSP), which includes the tracker and peer protocols; and discusses the scope, requirements, and use cases of PPSP.

This document describes experiments that clarify how an approach similar to Application-Layer Traffic Optimization (ALTO) was effective in reducing network traffic. These experiments were performed in Japan by the P2P Network Experiment Council in an attempt to harmonize peer-to-peer (P2P) technology with network infrastructure. Based on what was learned from these experiments, this document provides some suggestions that might be useful for the ALTO architecture and especially for application-independent ALTO- like server operation.

Peer-to-peer (P2P) traffic optimization techniques that aim at improving locality in the peer selection process have attracted great interest in the research community and have been the subject of much discussion. Some of this discussion has produced controversial myths, some rooted in reality while others remain unfounded. This document evaluates the most prominent myths attributed to P2P optimization techniques by referencing the most relevant study or studies that have addressed facts pertaining to the myth. Using these studies, the authors hope to either confirm or refute each specific myth.

This document is a product of the IRTF P2PRG (Peer-to-Peer Research Group).

Low Extra Delay Background Transport (LEDBAT) is an experimental delay-based congestion control algorithm that seeks to utilize the available bandwidth on an end-to-end path while limiting the consequent increase in queueing delay on that path. LEDBAT uses changes in one-way delay measurements to limit congestion that the flow itself induces in the network. LEDBAT is designed for use by background bulk-transfer applications to be no more aggressive than standard TCP congestion control (as specified in RFC 5681) and to yield in the presence of competing flows, thus limiting interference with the network performance of competing flows. This document defines an Experimental Protocol for the Internet community.

Peer-to-peer (P2P) applications have become widely used on the Internet today and make up a large portion of the traffic in many networks. In P2P applications, one technique for reducing the transit and uplink P2P traffic is to introduce storage capabilities within the network. Traditional caches (e.g., P2P and Web caches) provide such storage, but they can be complex (e.g., P2P caches need to explicitly support individual P2P application protocols), and do not allow users to manage resource usage policies for content in the cache. This document discusses the introduction of in-network storage for P2P applications and shows the need for a standard protocol for accessing this storage. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document surveys deployed and experimental in-network storage systems and describes their applicability for the DECADE (DECoupled Application Data Enroute) architecture. This document is not an Internet Standards Track specification; it is published for informational purposes.

A significant part of the Internet traffic today is generated by peer-to-peer (P2P) applications used originally for file sharing, and more recently for real-time communications and live media streaming. Such applications discover a route to each other through an overlay network with little knowledge of the underlying network topology. As a result, they may choose peers based on information deduced from empirical measurements, which can lead to suboptimal choices. This document, a product of the P2P Research Group, presents a survey of existing literature on discovering and using network topology information for Application-Layer Traffic Optimization. This document is not an Internet Standards Track specification; it is published for informational purposes.

Peer-to-peer (P2P) networks have become popular for certain applications and deployments for a variety of reasons, including fault tolerance, economics, and legal issues. It has therefore become reasonable for resource consuming and typically centralized applications like Voice over IP (VoIP) and, in general, realtime communication to adapt and exploit the benefits of P2P. Such a migration needs to address a new set of P2P-specific security problems. This document describes some of the known issues found in common P2P networks, analyzing the relevance of such issues and the applicability of existing solutions when using P2P architectures for realtime communication. This document is a product of the P2P Research Group. This document is not an Internet Standards Track specification; it is published for informational purposes.

In this document, we provide a survey of P2P (Peer-to-Peer) systems. The survey includes a definition and several taxonomies of P2P systems. This survey also includes a description of which types of applications can be built with P2P technologies and examples of P2P applications that are currently in use on the Internet. Finally, we discuss architectural trade-offs and provide guidelines for deciding whether or not a P2P architecture would be suitable to meet the requirements of a given application. This memo provides information for the Internet community.

Distributed applications -- such as file sharing, real-time communication, and live and on-demand media streaming -- prevalent on the Internet use a significant amount of network resources. Such applications often transfer large amounts of data through connections established between nodes distributed across the Internet with little knowledge of the underlying network topology. Some applications are so designed that they choose a random subset of peers from a larger set with which to exchange data. Absent any topology information guiding such choices, or acting on suboptimal or local information obtained from measurements and statistics, these applications often make less than desirable choices.

This document discusses issues related to an information-sharing service that enables applications to perform better-than-random peer selection. This memo provides information for the Internet community.

This document describes the experiences of Comcast, a large cable broadband Internet Service Provider (ISP) in the U.S., in a Proactive Network Provider Participation for P2P (P4P) technical trial in July 2008. This trial used P4P iTracker technology, which is being considered by the IETF as part of the Application Layer Transport Optimization (ALTO) working group. This memo provides information for the Internet community.

This document reports the outcome of a workshop organized by the Real-time Applications and Infrastructure Area Directors of the IETF to discuss network delay and congestion issues resulting from increased Peer-to-Peer (P2P) traffic volumes. The workshop was held on May 28, 2008 at MIT in Cambridge, MA, USA. The goals of the workshop were twofold: to understand the technical problems that ISPs and end users are experiencing as a result of high volumes of P2P traffic, and to begin to understand how the IETF may be helpful in addressing these problems. Gaining an understanding of where in the IETF this work might be pursued and how to extract feasible work items were highlighted as important tasks in pursuit of the latter goal. The workshop was very well attended and produced several work items that have since been taken up by members of the IETF community. This memo provides information for the Internet community.

This memo documents the various methods known to be in use by applications to establish direct communication in the presence of Network Address Translators (NATs) at the current time. Although this memo is intended to be mainly descriptive, the Security Considerations section makes some purely advisory recommendations about how to deal with security vulnerabilities the applications could inadvertently create when using the methods described. This memo covers NAT traversal approaches used by both TCP- and UDP-based applications. This memo is not an endorsement of the methods described, but merely an attempt to capture them in a document. This memo provides information for the Internet community.

The pace of research on peer-to-peer (P2P) networking in the last five years warrants a critical survey. P2P has the makings of a disruptive technology -- it can aggregate enormous storage and processing resources while minimizing entry and scaling costs.

Failures are common amongst massive numbers of distributed peers, though the impact of individual failures may be less than in conventional architectures. Thus, the key to realizing P2P's potential in applications other than casual file sharing is robustness.

P2P search methods are first couched within an overall P2P taxonomy. P2P indexes for simple key lookup are assessed, including those based on Plaxton trees, rings, tori, butterflies, de Bruijn graphs, and skip graphs. Similarly, P2P indexes for keyword lookup, information retrieval and data management are explored. Finally, early efforts to optimize range, multi-attribute, join, and aggregation queries over P2P indexes are reviewed. Insofar as they are available in the primary literature, robustness mechanisms and metrics are highlighted throughout. However, the low-level mechanisms that most affect robustness are not well isolated in the literature. Recommendations are given for future research. This memo provides information for the Internet community.

This Applicability Statement (AS) describes how to exchange structured business data securely using the File Transfer Protocol (FTP) for XML, Binary, Electronic Data Interchange (EDI - ANSI X12 or UN/EDIFACT), or other data used for business-to-business data interchange for which MIME packaging can be accomplished using standard MIME content types. Authentication and data confidentiality are obtained by using Cryptographic Message Syntax (S/MIME) security body parts. Authenticated acknowledgements employ multipart/signed replies to the original message. This memo provides information for the Internet community.

This document provides an applicability statement (RFC 2026, Section 3.2) that describes how to exchange structured business data securely using the HTTP transfer protocol, instead of SMTP; the applicability statement for SMTP is found in RFC 3335. Structured business data may be XML; Electronic Data Interchange (EDI) in either the American National Standards Committee (ANSI) X12 format or the UN Electronic Data Interchange for Administration, Commerce, and Transport (UN/EDIFACT) format; or other structured data formats. The data is packaged using standard MIME structures. Authentication and data confidentiality are obtained by using Cryptographic Message Syntax with S/MIME security body parts. Authenticated acknowledgements make use of multipart/signed Message Disposition Notification (MDN) responses to the original HTTP message. This applicability statement is informally referred to as "AS2" because it is the second applicability statement, produced after "AS1", RFC 3335. [STANDARDS-TRACK]

This document describes how to exchange structured business data

securely using SMTP transport for Electronic Data Interchange,

(EDI - either the American Standards Committee X12 or UN/EDIFACT,

Electronic Data Interchange for Administration, Commerce and

Transport), XML or other data used for business to business data

interchange. The data is packaged using standard MIME

content-types. Authentication and privacy are obtained by using

Cryptographic Message Syntax (S/MIME) or OpenPGP security body

parts. Authenticated acknowledgements make use of

multipart/signed replies to the original SMTP message.