[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]
PROPOSED STANDARD
Internet Engineering Task Force (IETF) C. Newman
Request for Comments: 8437 Oracle
Updates: 3501 August 2018
Category: Standards Track
ISSN: 2070-1721
IMAP UNAUTHENTICATE Extension for Connection Reuse
Abstract
This specification extends the Internet Message Access Protocol
(IMAP) to allow an administrative client to reuse the same IMAP
connection on behalf of multiple IMAP user identities.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
https://www.rfc-editor.org/info/rfc8437.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Newman Standards Track [Page 1]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions Used in This Document . . . . . . . . . . . . . . 2
3. UNAUTHENTICATE Command . . . . . . . . . . . . . . . . . . . 3
4. Interactions . . . . . . . . . . . . . . . . . . . . . . . . 4
4.1. Stateful Extensions . . . . . . . . . . . . . . . . . . . 4
4.2. Client Certificates, SASL EXTERNAL, and imaps . . . . . . 5
5. Revised State Machine . . . . . . . . . . . . . . . . . . . . 6
6. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 7
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7
8. Security Considerations . . . . . . . . . . . . . . . . . . . 7
9. Privacy Considerations . . . . . . . . . . . . . . . . . . . 8
10. References . . . . . . . . . . . . . . . . . . . . . . . . . 8
10.1. Normative References . . . . . . . . . . . . . . . . . . 8
10.2. Informative References . . . . . . . . . . . . . . . . . 9
Appendix A. Design Considerations . . . . . . . . . . . . . . . 11
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 11
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Introduction
Modern IMAP [RFC3501] server deployments often have peer systems with
administrative privilege that perform actions on behalf of IMAP end
users. For example, a voicemail gateway can use IMAP to store a
user's voicemail and mark that voicemail as \Seen when the user
listens to it via the phone interface. These systems can issue the
IMAP AUTHENTICATE command with administrative credentials to act on
behalf of other users. However, with the IMAP base specification,
these specialized IMAP clients must close the connection and create a
new connection for each user. For efficiency reasons, it is
desirable for these clients to reuse the same connection,
particularly if SSL has been negotiated. This specification proposes
the UNAUTHENTICATE command to achieve this goal.
The IMAP state machine described in Section 3 of RFC 3501 does not
have a transition from authenticated or selected state to not
authenticated state. The UNAUTHENTICATE command adds this
transition.
2. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Newman Standards Track [Page 2]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
3. UNAUTHENTICATE Command
Arguments: None
Responses: No specific response for this command
Result: OK - Completed, now in not authenticated state
BAD - Command unknown or arguments invalid
This command directs the server to reset all connection state except
for the state of the TLS [RFC8446] layer. Upon completion, the
server connection is placed in not authenticated state. This
represents Transition 7 in the State Machine Diagram (Section 5).
If a mailbox was selected, the mailbox ceases to be selected, but no
expunge event is generated. If a Simple Authentication and Security
Layer (SASL) [RFC4422] was active, the server terminates its outgoing
security layer immediately after sending the CRLF following the OK
response. The client's outgoing security layer terminates
immediately after the CRLF following the UNAUTHENTICATE command.
Note that a BAD response only occurs if UNAUTHENTICATE is issued in
an invalid state, is not advertised by the server, or does not follow
the command syntax in the specification. A NO response is not
permitted. As a result, specification-compliant implementations will
interoperate across security layer termination.
After sending this command, the client is free to issue a new
AUTHENTICATE or LOGIN command as permitted based on the server's
capabilities. If no SASL security layer was active, the client is
permitted to pipeline the UNAUTHENTICATE command with a subsequent
AUTHENTICATE command. If the IMAP server also advertises SASL-IR
[RFC4959], this permits an administrative client to re-authenticate
in one round trip. Because of this pipelining optimization, a server
advertising UNAUTHENTICATE is not permitted to respond to the
UNAUTHENTICATE command with a NO response if it is unable to reset
the state associated with the connection. Servers MAY close the
connection with an untagged BYE response if this preferably rare
situation occurs.
Servers MAY choose to advertise the UNAUTHENTICATE capability only
after authentication has completed. As a result, clients may need to
issue an IMAP CAPABILITY command after authentication in order to
determine the availability of UNAUTHENTICATE.
Newman Standards Track [Page 3]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
The IMAP ID [RFC2971] command provides properties about the client
primarily for use in server log or audit files. Because IMAP ID is
not related to application authentication or user identity in any
way, and caching it for the duration of the client connection can be
useful, the interaction between IMAP ID and the UNAUTHENTICATE
command is defined by the implementation.
4. Interactions
This section describes interactions between this extension and other
IMAP extensions or usage models.
4.1. Stateful Extensions
The connection state for the following list of IMAP extensions MUST
be reset if both a) the specified extension is advertised and b) the
UNAUTHENTICATE command is advertised and used. This list may not be
complete; the requirement to reset the connection state applies to
all current and future extensions except STARTTLS and ID. Additional
requirements apply to specific stateful extensions as follows:
o Cached identity information, such as group memberships, that are
used to evaluate access control lists [RFC4314] MUST be reset.
o After an UNAUTHENTICATE command is issued, CONDSTORE servers
[RFC7162] MUST behave as if no CONDSTORE-enabling command was
issued.
o If IMAP COMPRESS [RFC4978] is active, the server terminates its
outgoing compression layer after it sends the CRLF following the
OK response. The client terminates its outgoing compression layer
after the CRLF following the UNAUTHENTICATE command. When it
matters, the compression layer terminates before a SASL layer
terminates.
o Any extensions enabled by the IMAP ENABLE [RFC5161] command cease
to be enabled when the UNAUTHENTICATE command is issued. This
includes, but is not limited to, CONDSTORE [RFC7162], QRESYNC
[RFC7162], METADATA [RFC5464], METADATA-SERVER [RFC5464], and
UTF8=ACCEPT [RFC6855].
o A server advertising SEARCHRES [RFC5182] discards any saved search
results so that '$' subsequently represents the empty set.
o A server advertising LANGUAGE [RFC5255] will revert to the
"i-default" language.
Newman Standards Track [Page 4]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
o When a server advertises CONTEXT=SEARCH or CONTEXT=SORT [RFC5267],
the UNAUTHENTICATE command includes an implicit CANCELUPDATE for
all server contexts.
o When a server advertises NOTIFY [RFC5465], the UNAUTHENTICATE
command cancels the server state related to the NOTIFY command and
reverts to default IMAP base-specification behavior for
notifications.
4.2. Client Certificates, SASL EXTERNAL, and imaps
When a TLS [RFC8446] security layer is negotiated using either the
STARTTLS command or the imaps port [RFC8314], IMAP servers may be
configured to request a client certificate, and IMAP clients may
provide one. Client credentials at the TLS layer do not normally
impact the application layer; however, they do have an impact when
the SASL EXTERNAL mechanism [RFC4422] in an IMAP AUTHENTICATE command
is used to direct the server to use the provided client certificate
to authenticate as the specified IMAP user. The UNAUTHENTICATE
command breaks any application-level binding of the TLS client
credentials but does not discard the client credentials. As a
result, an administrative client may use a client certificate with
administrative privilege to act on behalf of multiple IMAP users in
the same connection via the EXTERNAL mechanism and the UNAUTHENTICATE
command.
Some server implementations using the imaps port will request and use
a TLS client certificate to authenticate immediately as the default
IMAP identity associated with that certificate. These
implementations indicate this behavior by using the PREAUTH greeting,
as indicated by Transition 2 in the State Machine Diagram
(Section 5). As a result, TLS client certificates cannot be used for
administrative proxy authentication with the imaps port unless the
UNAUTHENTICATE command is also advertised. In that case, an
administrative client can respond to the PREAUTH greeting with an
UNAUTHENTICATE command and then issue an AUTHENTICATE EXTERNAL
command.
Newman Standards Track [Page 5]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
5. Revised State Machine
+----------------------+
|connection established|
+----------------------+
||
\/
+--------------------------------------+
| server greeting |
+--------------------------------------+
|| (1) || (2) || (3)
\/ || ||
+-----------------+ || ||
|Not Authenticated|<===||=========++ ||
+-----------------+ || (7) || ||
|| (8) || (4) || || ||
|| \/ \/ || ||
|| +----------------+ || ||
|| | |========++ ||
|| | Authenticated |<=++ || ||
|| +----------------+ || || ||
|| || (8) || (5) ||(6) || ||
|| || \/ || || ||
|| || +--------+ || || ||
|| || |Selected|==++ || ||
|| || | |========++ ||
|| || +--------+ ||
|| || || (8) ||
\/ \/ \/ \/
+--------------------------------------+
| Logout |
+--------------------------------------+
||
\/
+-------------------------------+
|both sides close the connection|
+-------------------------------+
Revised IMAP state machine transitions:
1. Connection without pre-authentication (OK greeting)
2. Pre-authenticated connection (PREAUTH greeting)
3. Rejected connection (BYE greeting)
4. Successful LOGIN or AUTHENTICATE command
Newman Standards Track [Page 6]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
5. Successful SELECT or EXAMINE command
6. CLOSE, UNSELECT [RFC3691], or failed SELECT or EXAMINE command
7. UNAUTHENTICATE command
8. LOGOUT command, server shutdown, or connection closed
6. Formal Syntax
The following syntax specification uses the Augmented Backus-Naur
Form (ABNF), as described in [RFC5234]. Amended terms are defined in
[RFC3501].
capability =/ "UNAUTHENTICATE"
command-auth =/ "UNAUTHENTICATE"
command-select =/ "UNAUTHENTICATE"
7. IANA Considerations
IANA has added the UNAUTHENTICATE capability to the "IMAP
Capabilities" registry.
8. Security Considerations
The original IMAP state machine was designed to allow a server-
implementation approach in which each IMAP authentication identity
matches an operating system identity and the server revokes all
administrative privilege once authentication completes. This
extension is not compatible with that implementation approach.
However, that approach has significant performance costs on Unix
systems, and this extension is designed for environments where
efficiency is a relatively high-priority deployment goal. This
extension is therefore appropriate for some deployments but may not
be appropriate for the most security-sensitive environments.
IMAP server implementations are complicated and can retain a lot of
state related to an authenticated user. Server implementers need to
take care to reset all server state such that authentication as a
subsequent user does not inherit any data or privileges from the
previous user. State data associated with a user can include cached
identity information such as group membership used to evaluate access
control lists [RFC4314], active notifications [RFC5465], access to
per-user data such as flags, etc.
Newman Standards Track [Page 7]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
IMAP server systems are often deployed in a two-tier model where a
server-side IMAP proxy routes to an IMAP backend that handles all
connections for a subset of possible users. Some IMAP proxies enter
a pass-through mode after authentication. If enabled, the
UNAUTHENTICATE command would allow a client, on a subsequent
authentication, to bypass any security restrictions present in the
proxy layer but not in the backend server layer. As a result, IMAP
server implementations of this extension MUST provide a way to
disable it when it is not needed. Use of an IMAP proxy that
processes the UNAUTHENTICATE command at the proxy layer eliminates
this concern. Another option to mitigate this concern is for servers
to only enable the UNAUTHENTICATE extension if the supplied
authentication credentials are associated with an administrative
identity.
9. Privacy Considerations
For the most part, this extension will have no impact on the privacy
considerations already present in an IMAP implementation. However,
if this extension were used between data centers, it could improve
end-user privacy by increasing the difficultly of traffic analysis
due to connection reuse.
10. References
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, DOI 10.17487/RFC3501, March 2003,
<https://www.rfc-editor.org/info/rfc3501>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
Newman Standards Track [Page 8]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
10.2. Informative References
[RFC2971] Showalter, T., "IMAP4 ID extension", RFC 2971,
DOI 10.17487/RFC2971, October 2000,
<https://www.rfc-editor.org/info/rfc2971>.
[RFC3691] Melnikov, A., "Internet Message Access Protocol (IMAP)
UNSELECT command", RFC 3691, DOI 10.17487/RFC3691,
February 2004, <https://www.rfc-editor.org/info/rfc3691>.
[RFC4314] Melnikov, A., "IMAP4 Access Control List (ACL) Extension",
RFC 4314, DOI 10.17487/RFC4314, December 2005,
<https://www.rfc-editor.org/info/rfc4314>.
[RFC4422] Melnikov, A., Ed. and K. Zeilenga, Ed., "Simple
Authentication and Security Layer (SASL)", RFC 4422,
DOI 10.17487/RFC4422, June 2006,
<https://www.rfc-editor.org/info/rfc4422>.
[RFC4959] Siemborski, R. and A. Gulbrandsen, "IMAP Extension for
Simple Authentication and Security Layer (SASL) Initial
Client Response", RFC 4959, DOI 10.17487/RFC4959,
September 2007, <https://www.rfc-editor.org/info/rfc4959>.
[RFC4978] Gulbrandsen, A., "The IMAP COMPRESS Extension", RFC 4978,
DOI 10.17487/RFC4978, August 2007,
<https://www.rfc-editor.org/info/rfc4978>.
[RFC5161] Gulbrandsen, A., Ed. and A. Melnikov, Ed., "The IMAP
ENABLE Extension", RFC 5161, DOI 10.17487/RFC5161, March
2008, <https://www.rfc-editor.org/info/rfc5161>.
[RFC5182] Melnikov, A., "IMAP Extension for Referencing the Last
SEARCH Result", RFC 5182, DOI 10.17487/RFC5182, March
2008, <https://www.rfc-editor.org/info/rfc5182>.
[RFC5255] Newman, C., Gulbrandsen, A., and A. Melnikov, "Internet
Message Access Protocol Internationalization", RFC 5255,
DOI 10.17487/RFC5255, June 2008,
<https://www.rfc-editor.org/info/rfc5255>.
[RFC5267] Cridland, D. and C. King, "Contexts for IMAP4", RFC 5267,
DOI 10.17487/RFC5267, July 2008,
<https://www.rfc-editor.org/info/rfc5267>.
Newman Standards Track [Page 9]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
[RFC5464] Daboo, C., "The IMAP METADATA Extension", RFC 5464,
DOI 10.17487/RFC5464, February 2009,
<https://www.rfc-editor.org/info/rfc5464>.
[RFC5465] Gulbrandsen, A., King, C., and A. Melnikov, "The IMAP
NOTIFY Extension", RFC 5465, DOI 10.17487/RFC5465,
February 2009, <https://www.rfc-editor.org/info/rfc5465>.
[RFC6855] Resnick, P., Ed., Newman, C., Ed., and S. Shen, Ed., "IMAP
Support for UTF-8", RFC 6855, DOI 10.17487/RFC6855, March
2013, <https://www.rfc-editor.org/info/rfc6855>.
[RFC7162] Melnikov, A. and D. Cridland, "IMAP Extensions: Quick Flag
Changes Resynchronization (CONDSTORE) and Quick Mailbox
Resynchronization (QRESYNC)", RFC 7162,
DOI 10.17487/RFC7162, May 2014,
<https://www.rfc-editor.org/info/rfc7162>.
[RFC8314] Moore, K. and C. Newman, "Cleartext Considered Obsolete:
Use of Transport Layer Security (TLS) for Email Submission
and Access", RFC 8314, DOI 10.17487/RFC8314, January 2018,
<https://www.rfc-editor.org/info/rfc8314>.
[RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol
Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
<https://www.rfc-editor.org/info/rfc8446>.
Newman Standards Track [Page 10]
RFC 8437 IMAP UNAUTHENTICATE for Connection Reuse August 2018
Appendix A. Design Considerations
The author deliberately chose to add a separate UNAUTHENTICATE
command instead of allowing the LOGIN or AUTHENTICATE commands to be
issued when the connection is in a state other than unauthenticated.
The primary reason for this choice is that the code that transitions
from not authenticated state to authenticated state in a server is
often the most security-sensitive code, because it needs to assume
and handle unconditionally hostile attackers. That sensitive code is
simpler if it only handles a single server state (unauthenticated)
and the state transition is as simple as possible. Smaller and
simpler code is easier to audit and write in a secure way.
A secondary reason to have a separate command is that it is simpler
to enable or disable the feature with that design. See the
discussion in the Security Considerations section recommending that
implementations provide a way to disable this extension.
Acknowledgements
Thanks to Fred Batty for implementing UNAUTHENTICATE and to Cyrus
Daboo for constructive suggestions to improve this document.
Author's Address
Chris Newman
Oracle
440 E. Huntington Dr., Suite 400
Arcadia, CA 91006
United States of America
Email: chris.newman@oracle.com
Newman Standards Track [Page 11]