MLD

This document specifies the Multicast Listener Discovery version 2 (MLDv2) protocol. MLD is used by an IPv6 router to discover the presence of multicast listeners on directly attached links and to discover which multicast addresses are of interest to those neighboring nodes. MLDv2 is designed to be interoperable with MLDv1. MLDv2 adds the ability for a node to report interest in listening to packets with a particular multicast address only from specific source addresses or from all sources except for specific source addresses.

This document updates RFC 2710 and obsoletes RFC 3810.

This document defines a YANG data model that can be used to configure and manage Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) Proxy devices. The YANG module in this document conforms to the Network Management Datastore Architecture (NMDA).

This document specifies a generic mechanism to extend IGMPv3 and Multicast Listener Discovery Version 2 (MLDv2) by using a list of TLVs (Type, Length, and Value).

This document describes how to support endpoints running the Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) efficiently for the multicast services over an Ethernet VPN (EVPN) network by incorporating IGMP/MLD Proxy procedures on EVPN Provider Edges (PEs).

This document defines a YANG data model that can be used to configure and manage Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) snooping devices. The YANG module in this document conforms to the Network Management Datastore Architecture (NMDA).

This document defines a YANG data model that can be used to configure and manage Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) devices.

This document specifies a solution for the delivery of IPv4 multicast services to IPv4 clients over an IPv6 multicast network. The solution relies upon a stateless IPv4-in-IPv6 encapsulation scheme and uses an IPv6 multicast distribution tree to deliver IPv4 multicast traffic. The solution is particularly useful for the delivery of multicast service offerings to customers serviced by Dual-Stack Lite (DS-Lite).

Fast handover protocols for Mobile IPv6 (MIPv6) and Proxy Mobile IPv6 (PMIPv6) define mobility management procedures that support unicast communication at reduced handover latency. Fast handover base operations do not affect multicast communication and, hence, do not accelerate handover management for native multicast listeners. Many multicast applications like IPTV or conferencing, though, comprise delay-sensitive, real-time traffic and will benefit from fast handover completion. This document specifies extension of the Mobile IPv6 Fast Handovers (FMIPv6) and the Fast Handovers for Proxy Mobile IPv6 (PFMIPv6) protocols to include multicast traffic management in fast handover operations. This multicast support is provided first at the control plane by management of rapid context transfer between access routers and second at the data plane by optional fast traffic forwarding that may include buffering. An FMIPv6 access router indicates support for multicast using an updated Proxy Router Advertisements message format.

This document updates RFC 5568, "Mobile IPv6 Fast Handovers".

This document proposes some experimental enhancements to the base solution to support IP multicasting in a Proxy Mobile IPv6 (PMIPv6) domain. These enhancements include the use of a multicast tree mobility anchor as the topological anchor point for multicast traffic, as well as a direct routing option where the Mobile Access Gateway can provide access to multicast content in the local network. The goal of these enhancements is to provide benefits such as reducing multicast traffic replication and supporting different PMIPv6 deployment scenarios.

The Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) are the protocols used by hosts and multicast routers to exchange their IP multicast group memberships with each other. This document describes ways to achieve IGMPv3 and MLDv2 protocol optimization for mobility and aims to become a guideline for the tuning of IGMPv3/MLDv2 Queries, timers, and counter values. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document describes deployment options for activating multicast listener functions in Proxy Mobile IPv6 domains without modifying mobility and multicast protocol standards. Similar to home agents in Mobile IPv6, Local Mobility Anchors of Proxy Mobile IPv6 serve as multicast subscription anchor points, while Mobile Access Gateways provide Multicast Listener Discovery (MLD) proxy functions. In this scenario, mobile nodes remain agnostic of multicast mobility operations. Support for mobile multicast senders is outside the scope of this document. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document describes lightweight IGMPv3 and MLDv2 protocols (LW- IGMPv3 and LW-MLDv2), which simplify the standard (full) versions of IGMPv3 and MLDv2. The interoperability with the full versions and the previous versions of IGMP and MLD is also taken into account. [STANDARDS-TRACK]

This document discusses current mobility extensions to IP-layer multicast. It describes problems arising from mobile group communication in general, the case of multicast listener mobility, and problems for mobile senders using Any Source Multicast and Source-Specific Multicast. Characteristic aspects of multicast routing and deployment issues for fixed IPv6 networks are summarized. Specific properties and interplays with the underlying network access are surveyed with respect to the relevant technologies in the wireless domain. It outlines the principal approaches to multicast mobility, together with a comprehensive exploration of the mobile multicast problem and solution space. This document concludes with a conceptual road map for initial steps in standardization for use by future mobile multicast protocol designers. This document is a product of the IP Mobility Optimizations (MobOpts) Research Group. This document is not an Internet Standards Track specification; it is published for informational purposes.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing the Internet Group Management Protocol (IGMP) and the Multicast Listener Discovery (MLD) protocol. [STANDARDS-TRACK]

This document provides functional requirements for network solutions that support multicast over Virtual Private LAN Service (VPLS). It specifies requirements both from the end user and service provider standpoints. It is intended that potential solutions will use these requirements as guidelines. This memo provides information for the Internet community.

The definitions of the Internet Group Management Protocol Version 3 (IGMPv3) and Multicast Listener Discovery Version 2 (MLDv2) require new behavior within the multicast routing protocols. The additional source information contained in IGMPv3 and MLDv2 messages necessitates that multicast routing protocols manage and utilize the information. This document describes how multicast routing protocols will interact with these source-filtering group management protocols. This memo provides information for the Internet community.

The Internet Group Management Protocol Version 3 (IGMPv3) and the Multicast Listener Discovery Protocol Version 2 (MLDv2) are protocols that allow a host to inform its neighboring routers of its desire to receive IPv4 and IPv6 multicast transmissions, respectively. Source-specific multicast (SSM) is a form of multicast in which a receiver is required to specify both the network-layer address of the source and the multicast destination address in order to receive the multicast transmission. This document defines the notion of an "SSM-aware" router and host, and clarifies and (in some cases) modifies the behavior of IGMPv3 and MLDv2 on SSM-aware routers and hosts to accommodate source-specific multicast. This document updates the IGMPv3 and MLDv2 specifications. [STANDARDS-TRACK]

In certain topologies, it is not necessary to run a multicast routing protocol. It is sufficient for a device to learn and proxy group membership information and simply forward multicast packets based upon that information. This document describes a mechanism for forwarding based solely upon Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) membership information. [STANDARDS-TRACK]

This memo describes the recommendations for Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) snooping switches. These are based on best current practices for IGMPv2, with further considerations for IGMPv3- and MLDv2-snooping. Additional areas of relevance, such as link layer topology changes and Ethernet-specific encapsulation issues, are also considered. This memo provides information for the Internet community.

The concept of Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) snooping requires the ability to identify the location of multicast routers. Since snooping is not standardized, there are many mechanisms in use to identify the multicast routers. However, this can lead to interoperability issues between multicast routers and snooping switches from different vendors.

This document introduces a general mechanism that allows for the discovery of multicast routers. This new mechanism, Multicast Router Discovery (MRD), introduces a standardized means of identifying multicast routers without a dependency on particular multicast routing protocols. [STANDARDS-TRACK]

The Internet Group Management Protocol (IGMPv3) for IPv4 and the Multicast Listener Discovery (MLDv2) for IPv6 add the capability for applications to express source filters on multicast group memberships, which allows receiver applications to determine the set of senders (sources) from which to accept multicast traffic. This capability also simplifies support of one-to-many type multicast applications. This document specifies new socket options and functions to manage source filters for IP Multicast group memberships. It also defines the socket structures to provide input and output arguments to these new application program interfaces (APIs). These extensions are designed to provide access to the source filtering features, while introducing a minimum of change into the system and providing complete compatibility for existing multicast applications.

It has come to light that there is an issue with the selection of a suitable IPv6 source address for Multicast Listener Discovery (MLD) messages when a node is performing stateless address autoconfiguration. This document is intended to clarify the rules on selecting an IPv6 address to use for MLD messages. [STANDARDS-TRACK]

This document specifies the protocol used by an IPv6 router to discover the presence of multicast listeners (that is, nodes wishing to receive multicast packets) on its directly attached links, and to discover specifically which multicast addresses are of interest to those neighboring nodes. [STANDARDS-TRACK]