PMIPv6

Distributed Mobility Management solutions allow networks to be set up in such a way that traffic is distributed optimally and centrally deployed anchors are not relied upon to provide IP mobility support.

There are many different approaches to address Distributed Mobility Management -- for example, extending network-based mobility protocols (like Proxy Mobile IPv6) or client-based mobility protocols (like Mobile IPv6), among others. This document follows the former approach and proposes a solution based on Proxy Mobile IPv6, in which mobility sessions are anchored at the last IP hop router (called the mobility anchor and access router). The mobility anchor and access router is an enhanced access router that is also able to operate as a local mobility anchor or mobility access gateway on a per-prefix basis. The document focuses on the required extensions to effectively support the simultaneous anchoring several flows at different distributed gateways.

This specification defines extensions to the Proxy Mobile IPv6 (PMIPv6) protocol that allow a mobile access gateway (MAG) to register more than one proxy care-of address (pCoA) with the local mobility anchor (LMA) and to simultaneously establish multiple IP tunnels with the LMA. This capability allows the MAG to utilize all the available access networks to route the mobile node's IP traffic. This document defines the following two new mobility header options: the MAG Multipath Binding option and the MAG Identifier option.

In the basic Proxy Mobile IPv6 (PMIPv6) specification, a Mobile Node (MN) is assigned with a Home Network Prefix (HNP) during its initial attachment, and the MN configures its Home Address (HoA) with the HNP. During the movement of the MN, the HNP remains unchanged to keep ongoing communications associated with the HoA. However, the current PMIPv6 specification does not specify related operations when HNP renumbering has occurred (e.g., due to change of service provider or site topology, etc.). In this document, a solution to support HNP renumbering is proposed, as an optional extension of the PMIPv6 specification.

This document specifies the format and mechanism that is to be used for encoding Access-Network Identifiers in DHCPv4 and DHCPv6 messages by defining new Access-Network-Identifier options and sub-options.

A logical interface is a software semantic internal to the host operating system. This semantic is available in all popular operating systems and is used in various protocol implementations. Logical-interface support is required on the mobile node attached to a Proxy Mobile IPv6 domain for leveraging various network-based mobility management features such as inter-technology handoffs, multihoming, and flow mobility support. This document explains the operational details of the logical-interface construct and the specifics on how link-layer implementations hide the physical interfaces from the IP stack and from the network nodes on the attached access networks. Furthermore, this document identifies the applicability of this approach to various link-layer technologies and analyzes the issues around it when used in conjunction with various mobility management features.

Proxy Mobile IPv6 (PMIPv6) allows a mobile node to connect to the same PMIPv6 domain through different interfaces. This document describes extensions to the PMIPv6 protocol that are required to support network-based flow mobility over multiple physical interfaces.

This document updates RFC 5213. The extensions described in this document consist of the operations performed by the local mobility anchor and the mobile access gateway to manage the prefixes assigned to the different interfaces of the mobile node, as well as how the forwarding policies are handled by the network to ensure consistent flow mobility management.

The Access Network Identifier (ANI) mobility option was introduced in RFC 6757, "Access Network Identifier (ANI) Option for Proxy Mobile IPv6". This enables a Mobile Access Gateway (MAG) to convey identifiers like the network identifier, geolocation, and operator identifier. This specification extends the Access Network Identifier mobility option with sub-options to carry the civic location and the MAG group identifier. This specification also defines an ANI Update-Timer sub-option that determines when and how often the ANI option will be updated.

This document provides guidelines for achieving end-to-end Quality of Service (QoS) in a Proxy Mobile IPv6 (PMIPv6) domain where the access network is based on IEEE 802.11. RFC 7222 describes QoS negotiation between a Mobile Access Gateway (MAG) and Local Mobility Anchor (LMA) in a PMIPv6 mobility domain. The negotiated QoS parameters can be used for QoS policing and marking of packets to enforce QoS differentiation on the path between the MAG and LMA. IEEE 802.11 and Wi-Fi Multimedia - Admission Control (WMM-AC) describe methods for QoS negotiation between a Wi-Fi Station (MN in PMIPv6 terminology) and an Access Point. This document provides a mapping between the above two sets of QoS procedures and the associated QoS parameters. This document is intended to be used as a companion document to RFC 7222 to enable implementation of end-to-end QoS.

With Wi-Fi emerging as a crucial access network for mobile service providers, it has become important to provide functions commonly available in 3G and 4G networks in Wi-Fi access networks as well. Such functions include Access Point Name (APN) Selection, multiple Packet Data Network (PDN) connections, and seamless mobility between Wi-Fi and 3G/4G networks.

The EAP Authentication and Key Agreement (EAP-AKA), and EAP-AKA', protocol is required for mobile devices to access the mobile Evolved Packet Core (EPC) via Wi-Fi networks. This document defines a few new EAP attributes to enable the above-mentioned functions in such networks. The attributes are exchanged between a client (such as a Mobile Node (MN)) and its network counterpart (such as an Authentication, Authorization, and Accounting (AAA) server) in the service provider's infrastructure.

Fast handover protocols for Mobile IPv6 (MIPv6) and Proxy Mobile IPv6 (PMIPv6) define mobility management procedures that support unicast communication at reduced handover latency. Fast handover base operations do not affect multicast communication and, hence, do not accelerate handover management for native multicast listeners. Many multicast applications like IPTV or conferencing, though, comprise delay-sensitive, real-time traffic and will benefit from fast handover completion. This document specifies extension of the Mobile IPv6 Fast Handovers (FMIPv6) and the Fast Handovers for Proxy Mobile IPv6 (PFMIPv6) protocols to include multicast traffic management in fast handover operations. This multicast support is provided first at the control plane by management of rapid context transfer between access routers and second at the data plane by optional fast traffic forwarding that may include buffering. An FMIPv6 access router indicates support for multicast using an updated Proxy Router Advertisements message format.

This document updates RFC 5568, "Mobile IPv6 Fast Handovers".

This document specifies a method to split the control plane (CP) and user plane (UP) for a network infrastructure based on Proxy Mobile IPv6 (PMIPv6). Existing specifications allow a mobile access gateway (MAG) to separate its control and user plane using the Alternate Care-of Address mobility option for IPv6 or Alternate IPv4 Care-of Address option for IPv4. However, the current specification does not provide any mechanism allowing the local mobility anchor (LMA) to perform an analogous functional split. To remedy that shortcoming, this document specifies a mobility option enabling an LMA to provide an alternate LMA address to be used for the bidirectional user-plane traffic between the MAG and LMA. With this new option, an LMA will be able to use an IP address for its user plane that is different than the IP address used for the control plane.

Multicast communication can be enabled in Proxy Mobile IPv6 (PMIPv6) domains via the Local Mobility Anchors by deploying Multicast Listener Discovery (MLD) proxy functions at Mobile Access Gateways, by using direct traffic distribution within an ISP's access network, or by selective route optimization schemes. This document describes a base solution and an experimental protocol to support mobile multicast senders in PMIPv6 domains for all three scenarios. Protocol optimizations for synchronizing PMIPv6 with PIM, as well as a peering function for MLD proxies are defined. Mobile sources always remain agnostic of multicast mobility operations.

This specification defines a new mobility option, the Quality-of- Service (QoS) option, for Proxy Mobile IPv6. This option can be used by the local mobility anchor and the mobile access gateway for negotiating Quality-of-Service parameters for a mobile node's IP flows. The negotiated QoS parameters can be used for QoS policing and marking of packets to enforce QoS differentiation on the path between the local mobility anchor and the mobile access gateway. Furthermore, making QoS parameters available on the mobile access gateway enables mapping of these parameters to QoS rules that are specific to the access technology and allows those rules to be enforced on the access network using access-technology-specific approaches.

In Proxy Mobile IPv6, packets received from a Mobile Node (MN) by the Mobile Access Gateway (MAG) to which it is attached are typically tunneled to a Local Mobility Anchor (LMA) for routing. The term "localized routing" refers to a method by which packets are routed directly between an MN's MAG and the MAG of its Correspondent Node (CN) without involving any LMA. In a Proxy Mobile IPv6 deployment, it may be desirable to control the establishment of localized routing sessions between two MAGs in a Proxy Mobile IPv6 domain by requiring that the session be authorized. This document specifies how to accomplish this using the Diameter protocol.

This document specifies an experimental multicast handover optimization mechanism for Proxy Mobile IPv6 (PMIPv6) to accelerate the delivery of multicast traffic to mobile nodes after handovers. The mechanism, called Subscription Information Acquisition through the LMA (SIAL), is based on speeding up the acquisition of mobile nodes' multicast context by the mobile access gateways. To do that, extensions to the current PMIPv6 protocol are proposed. These extensions are not only applicable to the base solution for multicast support in Proxy Mobile IPv6, but they can also be applied to other solutions developed to avoid the tunnel convergence problem. Furthermore, these extensions are also independent of the role played by the mobile access gateway within the multicast network (acting as either multicast listener discovery proxy or multicast router).

This specification defines extensions to the Proxy Mobile IPv6 protocol for allowing a mobile router in a Proxy Mobile IPv6 domain to obtain IP prefixes for its attached mobile networks using DHCPv6 prefix delegation. Network-based mobility management support is provided for those delegated IP prefixes just as it is provided for the mobile node's home address. Even if the mobile router performs a handoff and changes its network point of attachment, mobility support is ensured for all the delegated IP prefixes and for all the IP nodes in the mobile network that use IP address configuration from those delegated IP prefixes.

This document specifies protocol enhancements for allowing the local mobility anchor in a Proxy Mobile IPv6 domain to asynchronously notify the mobile access gateway about changes related to a mobility session. These Update Notification messages are exchanged using a new Mobility Header message type specifically designed for this purpose.

This document proposes some experimental enhancements to the base solution to support IP multicasting in a Proxy Mobile IPv6 (PMIPv6) domain. These enhancements include the use of a multicast tree mobility anchor as the topological anchor point for multicast traffic, as well as a direct routing option where the Mobile Access Gateway can provide access to multicast content in the local network. The goal of these enhancements is to provide benefits such as reducing multicast traffic replication and supporting different PMIPv6 deployment scenarios.

This specification defines a new mobility option, the IPv4 Traffic Offload Selector option, for Proxy Mobile IPv6. This option can be used by the local mobility anchor and the mobile access gateway for negotiating IPv4 traffic offload policy for a mobility session. Based on the negotiated IPv4 traffic offload policy, a mobile access gateway can selectively offload some of the IPv4 traffic flows in the access network instead of tunneling back to the local mobility anchor in the home network.

The local mobility anchor in a Proxy Mobile IPv6 (PMIPv6) domain is able to provide access-network- and access-operator-specific handling or policing of the mobile node traffic using information about the access network to which the mobile node is attached. This specification defines a mechanism and a related mobility option for carrying the access network identifier and the access operator identification information from the mobile access gateway to the local mobility anchor over Proxy Mobile IPv6. [STANDARDS-TRACK]

Proxy Mobile IPv6 (PMIPv6) is a network based mobility management protocol that enables IP mobility for a host without requiring its participation in any mobility-related signaling. PMIPv6 requires all communications to go through the local mobility anchor. As this can be suboptimal, Localized Routing (LR) allows Mobile Nodes (MNs) attached to the same or different Mobile Access Gateways (MAGs) to route traffic by using localized forwarding or a direct tunnel between the gateways. This document proposes initiation, utilization, and termination mechanisms for localized routing between mobile access gateways within a proxy mobile IPv6 domain. It defines two new signaling messages, Localized Routing Initiation (LRI) and Local Routing Acknowledgment (LRA), that are used to realize this mechanism. [STANDARDS-TRACK]

This document defines new attributes to facilitate Proxy Mobile IPv6 operations using the RADIUS infrastructure. The protocol defined in this document uses RADIUS-based interfaces of the mobile access gateway and the local mobility anchor with the AAA server for authentication, authorization, and policy functions. The RADIUS interactions between the mobile access gateway and the RADIUS-based AAA server take place when the mobile node (MN) attaches, authenticates, and authorizes to a Proxy Mobile IPv6 domain. Furthermore, this document defines the RADIUS-based interface between the local mobility anchor and the AAA RADIUS server for authorizing received Proxy Binding Update messages for the mobile node's mobility session. In addition to the interactions related to mobility session setup, this document defines the baseline for the mobile access gateway and the local mobility anchor generated accounting. [STANDARDS-TRACK]

Proxy Mobile IPv6 (RFC 5213) requires that all mobile access gateways use a fixed link-local address and a fixed link-layer address on any of their access links that they share with mobile nodes. This requirement was intended to ensure that a mobile node does not detect any change with respect to its Layer 3 attachment, even after it roams from one mobile access gateway to another. In the absence of any reserved addresses for this use, coordination across vendors and manual configuration of these addresses on all of the mobility elements in a Proxy Mobile IPv6 domain are required. This document attempts to simplify this operational requirement by making a reservation for special addresses that can be used for this purpose. This document also updates RFC 5213. [STANDARDS-TRACK]

For extending the lifetime of a mobility session, the Proxy Mobile IPv6 specification requires the mobile access gateway to send a Proxy Binding Update message to the local mobility anchor on a per-session basis. In the absence of signaling semantics for performing operations with group-specific scope, this results in a significant amount of signaling traffic on a periodic basis between a given mobile access gateway and a local mobility anchor. This document defines optimizations to the binding update and revocation operations in Proxy Mobile IPv6 for performing operations with group-specific scope with the use of a group identifier. [STANDARDS-TRACK]

The use of Proxy Mobile IPv6 (PMIPv6) and Mobile IPv6 (MIPv6) in the same network requires some care. This document discusses scenarios where such mixed usage is appropriate and points out the need for interaction between the two mechanisms. Solutions and recommendations to enable these scenarios are also described. This document is not an Internet Standards Track specification; it is published for informational purposes.

This memo defines a portion of the Proxy Mobile IPv6 Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, the Proxy Mobile IPv6 MIB can be used to monitor and control the mobile access gateway (MAG) and the local mobility anchor (LMA) functions of a Proxy Mobile IPv6 (PMIPv6) entity. [STANDARDS-TRACK]

This document describes a runtime local mobility anchor assignment functionality and corresponding mobility options for Proxy Mobile IPv6. The runtime local mobility anchor assignment takes place during a Proxy Binding Update and a Proxy Binding Acknowledgement message exchange between a mobile access gateway and a local mobility anchor. The runtime local mobility anchor assignment functionality defined in this specification can be used, for example, for load- balancing purposes. [STANDARDS-TRACK]

SEcure Neighbor Discovery (SEND) specifies a method for securing Neighbor Discovery (ND) signaling against specific threats. As defined today, SEND assumes that the node sending an ND message is the owner of the address from which the message is sent and/or possesses a key that authorizes the node to act as a router, so that it is in possession of the private key or keys used to generate the digital signature on each message. This means that the Proxy ND signaling performed by nodes that do not possess knowledge of the address owner's private key and/or knowledge of a router's key cannot be secured using SEND. This document extends the current SEND specification in order to secure Proxy ND operation. This document defines an Experimental Protocol for the Internet community.

Proxy Mobile IPv6 is the IETF Standard for network-based mobility management. In Proxy Mobile IPv6, mobile nodes are topologically anchored at a Local Mobility Anchor, which forwards all data for registered mobile nodes. The setup and maintenance of localized routing, which allows forwarding of data packets between two mobile nodes' Mobility Access Gateways without involvement of their Local Mobility Anchor in forwarding, is not considered. This document describes the problem space of localized routing in Proxy Mobile IPv6. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document describes deployment options for activating multicast listener functions in Proxy Mobile IPv6 domains without modifying mobility and multicast protocol standards. Similar to home agents in Mobile IPv6, Local Mobility Anchors of Proxy Mobile IPv6 serve as multicast subscription anchor points, while Mobile Access Gateways provide Multicast Listener Discovery (MLD) proxy functions. In this scenario, mobile nodes remain agnostic of multicast mobility operations. Support for mobile multicast senders is outside the scope of this document. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document specifies a mechanism that enhances Proxy Mobile IPv6 protocol signaling to support the creation of a transient binding cache entry that is used to optimize the performance of dual radio handover, as well as single radio handover. This mechanism is applicable to the mobile node's inter-MAG (Mobility Access Gateway) handover while using a single interface or different interfaces. The handover problem space using the Proxy Mobile IPv6 base protocol is analyzed and the use of transient binding cache entries at the local mobility anchor is described. The specified extension to the Proxy Mobile IPv6 protocol ensures optimized forwarding of downlink as well as uplink packets between mobile nodes and the network infrastructure and avoids superfluous packet forwarding delay or even packet loss. This document defines an Experimental Protocol for the Internet community.

Large Proxy Mobile IPv6 deployments would benefit from a functionality where a Mobile Access Gateway could dynamically discover a Local Mobility Anchor for a Mobile Node attaching to a Proxy Mobile IPv6 domain. The purpose of the dynamic discovery functionality is to reduce the amount of static configuration in the Mobile Access Gateway. This document describes several possible dynamic Local Mobility Anchor discovery solutions. This document is not an Internet Standards Track specification; it is published for informational purposes.

Mobile IPv6 (MIPv6; RFC 3775) provides a mobile node with IP mobility when it performs a handover from one access router to another, and fast handovers for Mobile IPv6 (FMIPv6) are specified to enhance the handover performance in terms of latency and packet loss. While MIPv6 (and FMIPv6 as well) requires the participation of the mobile node in the mobility-related signaling, Proxy Mobile IPv6 (PMIPv6; RFC 5213) provides IP mobility to nodes that either have or do not have MIPv6 functionality without such involvement. Nevertheless, the basic performance of PMIPv6 in terms of handover latency and packet loss is considered no different from that of MIPv6.

When the fast handover is considered in such an environment, several modifications are needed to FMIPv6 to adapt to the network-based mobility management. This document specifies the usage of fast handovers for Mobile IPv6 (FMIPv6; RFC 5568) when Proxy Mobile IPv6 is used as the mobility management protocol. Necessary extensions are specified for FMIPv6 to support the scenario when the mobile node does not have IP mobility functionality and hence is not involved with either MIPv6 or FMIPv6 operations. [STANDARDS-TRACK]

Proxy Mobile IPv6 (PMIPv6) is a network-based mobility management protocol. The mobility entities involved in the Proxy Mobile IPv6 protocol, the mobile access gateway (MAG) and the local mobility anchor (LMA), set up tunnels dynamically to manage mobility for a mobile node within the Proxy Mobile IPv6 domain. This document describes a heartbeat mechanism between the MAG and the LMA to detect failures, quickly inform peers in the event of a recovery from node failures, and allow a peer to take appropriate action. [STANDARDS TRACK]

This specification defines a new mobility option for allowing the mobile access gateway and the local mobility anchor to negotiate Generic Routing Encapsulation (GRE) encapsulation mode and exchange the downlink and uplink GRE keys that are used for marking the downlink and uplink traffic that belong to a specific mobility session. In addition, the same mobility option can be used to negotiate the GRE encapsulation mode without exchanging the GRE keys. [STANDARDS-TRACK]

This document specifies extensions to the Proxy Mobile IPv6 protocol for adding IPv4 protocol support. The scope of IPv4 protocol support is two-fold: 1) enable IPv4 home address mobility support to the mobile node, and 2) allow the mobility entities in the Proxy Mobile IPv6 domain to exchange signaling messages over an IPv4 transport network. [STANDARDS-TRACK]

This specification defines Authentication, Authorization, and Accounting (AAA) interactions between Proxy Mobile IPv6 entities (both Mobile Access Gateway and Local Mobility Anchor) and a AAA server within a Proxy Mobile IPv6 Domain. These AAA interactions are primarily used to download and update mobile node specific policy profile information between Proxy Mobile IPv6 entities and a remote policy store. [STANDARDS-TRACK]

Mobile IPv4 is a standard mobility protocol that enables an IPv4 device to move among networks while maintaining its IP address. The mobile device has the Mobile IPv4 client function to signal its location to the routing anchor, known as the Home Agent. However, there are many IPv4 devices without such capability due to various reasons. This document describes Proxy Mobile IPv4 (PMIPv4), a scheme based on having the Mobile IPv4 client function in a network entity to provide mobility support for an unaltered and mobility-unaware IPv4 device. This document also describes a particular application of PMIPv4 as specified in the WiMAX Forum and another application that is to be adopted in 3GPP2. This document is not an Internet Standards Track specification; it is published for informational purposes.

Network-based mobility management enables IP mobility for a host without requiring its participation in any mobility-related signaling. The network is responsible for managing IP mobility on behalf of the host. The mobility entities in the network are responsible for tracking the movements of the host and initiating the required mobility signaling on its behalf. This specification describes a network-based mobility management protocol and is referred to as Proxy Mobile IPv6. [STANDARDS-TRACK]

In some Mobile IPv6 deployments, identifying the mobile node or the mobility service subscriber is not enough to distinguish between multiple services possibly provisioned to the said mobile node and its mobility service subscription. A capability to specify different services in addition to the mobile node identity can be leveraged to provide flexibility for mobility service providers on provisioning multiple services to one mobility service subscription. This document describes a Service Selection Mobility Option for both conventional Mobile IPv6 and Proxy Mobile IPv6 that is intended to assist home agents to make a specific service selection for the mobility service subscription during the binding registration procedure. This memo provides information for the Internet community.

Localized mobility management is a well-understood concept in the IETF, with a number of solutions already available. This document looks at the principal shortcomings of the existing solutions, all of which involve the host in mobility management, and makes a case for network-based local mobility management. This memo provides information for the Internet community.

In this document, design goals for a network-based localized mobility management (NETLMM) protocol are discussed. This memo provides information for the Internet community.

This document discusses security threats to network-based localized mobility management. Threats may occur on two interfaces: the interface between a localized mobility anchor and a mobile access gateway, as well as the interface between a mobile access gateway and a mobile node. Threats to the former interface impact the localized mobility management protocol itself. This memo provides information for the Internet community.