[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

INFORMATIONAL
Internet Engineering Task Force (IETF)                          P. Dawes
Request for Comments: 8123                                Vodafone Group
Category: Informational                                   C. Arunachalam
ISSN: 2070-1721                                            Cisco Systems
                                                              March 2017


           Requirements for Marking SIP Messages to be Logged

Abstract

   SIP networks use signaling monitoring tools to debug customer-
   reported problems and for regression testing if network or client
   software is upgraded.  As networks grow and become interconnected,
   including connection via transit networks, it becomes impractical to
   predict the path that SIP signaling will take between clients and,
   therefore, impractical to monitor SIP signaling end-to-end.

   This document describes the requirements for adding an indicator to
   the SIP Protocol Data Unit (PDU) or a SIP message that marks the PDU
   as a candidate for logging.  Such a marking will typically be applied
   as part of network testing controlled by the network operator and not
   used in regular client signaling.  However, such a marking can be
   carried end-to-end, including the SIP terminals, even if a session
   originates and terminates in different networks.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc8123.










Dawes & Arunachalam           Informational                     [Page 1]


RFC 8123                     Log Me" Marker                   March 2017


Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Conventions Used in This Document . . . . . . . . . . . . . .   3
   3.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
     3.1.  Network Boundary  . . . . . . . . . . . . . . . . . . . .   3
     3.2.  Trust Domain  . . . . . . . . . . . . . . . . . . . . . .   4
     3.3.  Intermediary  . . . . . . . . . . . . . . . . . . . . . .   4
   4.  Motivating Scenario . . . . . . . . . . . . . . . . . . . . .   4
     4.1.  Introduction  . . . . . . . . . . . . . . . . . . . . . .   4
     4.2.  Example Network Arrangement . . . . . . . . . . . . . . .   5
     4.3.  Example Debugging Procedure . . . . . . . . . . . . . . .   6
   5.  "Log Me" Marking Requirements . . . . . . . . . . . . . . . .   6
     5.1.  Message Logs  . . . . . . . . . . . . . . . . . . . . . .   6
     5.2.  "Log Me" Marking  . . . . . . . . . . . . . . . . . . . .   7
     5.3.  Processing the "Log Me" Marker  . . . . . . . . . . . . .   7
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .   8
     6.1.  Trust Domain  . . . . . . . . . . . . . . . . . . . . . .   8
     6.2.  Security Threats  . . . . . . . . . . . . . . . . . . . .   9
       6.2.1.  "Log Me" Marking  . . . . . . . . . . . . . . . . . .   9
       6.2.2.  Logged Information  . . . . . . . . . . . . . . . . .   9
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   9
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   9
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .   9
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  10
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  10
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  11









Dawes & Arunachalam           Informational                     [Page 2]


RFC 8123                     Log Me" Marker                   March 2017


1.  Introduction

   Service providers, enterprises, and others who operate networks that
   use SIP (see [RFC3261]) need the ability to debug problems reported
   by end users and also to run regression tests if SIP client software/
   hardware is upgraded.  Such debugging and testing might be confined
   to a single service provider or network, or they may occur between
   the administrative domains of different network operators, including
   domains in different countries that are interconnected through
   networks belonging to one or more third parties.

   A mechanism is needed to mark particular SIP sessions, i.e., those
   related to debugging or regression testing, as candidates for
   logging; this marking must be carried within the candidate SIP
   messages as they are routed across networks (and geographies) to
   enable logging at each SIP entity without having to know in advance
   the list of SIP entities through which the SIP signaling messages
   will traverse.  Such marking must take into account that SIP messages
   might traverse different network operators, different countries,
   regions with different privacy requirements, and different trust
   domains.  This document describes the requirements for such a "log
   me" marker for SIP signaling.

2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119], except that
   rather than describing interoperability requirements, they are used
   to describe requirements to be satisfied by the "log me" marker
   solution.

3.  Terminology

3.1.  Network Boundary

   A network boundary is the part of a signaling path where messages
   pass between entities that are under different administrative
   control.  Figure 2 in [RFC5853] shows a network boundary between the
   originating gateway GW-A1 in operator A's network and the Session
   Border Controller (SBC) in operator B's network.  A network boundary
   is significant in this document because manipulation of signaling at
   the boundary could prevent end-to-end testing or troubleshooting.








Dawes & Arunachalam           Informational                     [Page 3]


RFC 8123                     Log Me" Marker                   March 2017


   Topology hiding and protocol repair (see [RFC5853]) are two common
   functions that manipulate signaling at the network boundary.  These
   functions are performed by SIP device types (see [RFC7092]) such as a
   Session Border Controller and Interconnection Border Control Function
   (IBCF).

3.2.  Trust Domain

   In this document, a trust domain is the set of entities that have
   been identified by prior agreement as the participating elements in
   logging, typically for the purpose of debugging or regression
   testing.  A trust domain contains all SIP entities under
   configuration control of the network operator who is performing
   regression testing plus all SIP entities that are under configuration
   control of peer network operators who have agreed to participate in
   that regression testing.  The purpose of trust domain requirements is
   to prevent network operators from inadvertently triggering logging in
   networks that are not part of any testing or troubleshooting.

3.3.  Intermediary

   The term "intermediary" is defined in Section 2 of [RFC7989]; it
   refers to any entity along the call signaling path.

4.  Motivating Scenario

4.1.  Introduction

   Signaling for SIP session setup can cross several networks; these
   networks may not have common ownership and may also be in different
   countries.  If a single operator wishes to perform regression testing
   or fault debugging end-to-end, the separate ownership of networks
   that carry the signaling and the explosion in the number of possible
   signaling paths through SIP entities from the originating to the
   terminating user make it impractical to preconfigure logging end-to-
   end SIP signaling of a session of interest.















Dawes & Arunachalam           Informational                     [Page 4]


RFC 8123                     Log Me" Marker                   March 2017


4.2.  Example Network Arrangement

   The figure below gives an example of a signaling path through
   multiple networks.

      +------------------+          +------------------+
      | COUNTRY W        |          | COUNTRY X        |
      | Operator A       |          | Operator A       |
      |                  |          |                  |
      | SIP Phones       |          | SIP Phones       |
      |                  |        //|                  |
      +------------------+       // +------------------+
             |                  //
             |                 //
          ,'```',             //    +------------------+
      .`',.'      `..'``',<==//     | COUNTRY X        |
      ,'  Operator A         `',    | Operator A       |
      ;    Backbone Network    ..'--|                  |
      ',            ,.,    .'`      | PSTN phones      |
      '.,.`'.,,,.`   `''`           |                  |
             ||                     +------------------+
             ||
             \/
      +------------------+
      |                  |
      |  Transit Network |
      |                  |
      |                  |\\
      +------------------+ \\
              |             \\
              |              \\
      +------------------+    \\    +------------------+
      | COUNTRY Z        |     \\   | COUNTRY Y        |
      | Operator C       |      \\=>| Operator B       |
      |                  |          |                  |
      | SIP Phones       |          | SIP Phones       |
      |                  |          |                  |
      +------------------+          +------------------+


        Figure 1: Example Signaling Path through Multiple Networks










Dawes & Arunachalam           Informational                     [Page 5]


RFC 8123                     Log Me" Marker                   March 2017


4.3.  Example Debugging Procedure

   One possible set of steps is outlined below to illustrate the
   debugging procedure.

   o  The user's terminal is placed in debug mode.  The terminal logs
      its own signaling and inserts a "log me" marker into SIP requests
      for session setup.

   o  All SIP entities that the signaling traverses, from the first
      proxy the terminal connects to at the edge of the network to the
      destination client terminal, detect that the "log me" marker is
      present and then log SIP requests and responses that contain the
      marker if configured to do so.

   o  Subsequent responses and requests in the same dialog are also
      marked with a "log me" marker.  For some scenarios, such as call
      transfer, related dialogs may also be marked with "log me" marker.

   o  Logging stops, either because the dialog has ended or because a
      "stop event", typically expiry of a certain amount of time,
      occurred.

   o  Logs are retrieved, for example, by logging on to the SIP entity
      or entities that contain the logs.

5.  "Log Me" Marking Requirements

5.1.  Message Logs

   REQ1  If a SIP message is logged, then the entire SIP message (SIP
         headers and message body) MUST be logged using a standard
         logging format such as SIP Common Log Format (CLF) defined in
         [RFC6873].

   REQ2  Header fields SHOULD be logged in the form in which they appear
         in the message; they SHOULD NOT be converted between long and
         compact forms as described in [RFC3261], Section 7.3.3.

   When and how signaling logs are retrieved is out of scope of this
   document.  Logs might be retrieved by logging on to the SIP entity
   that contains the logs, by sending logs to a central server that is
   coordinating debugging, by storing them on removable media for later
   manual collection, or by some other method.  All log retrieval
   mechanisms MUST adhere to the authorization and privacy protection
   policies set forth by the network administrator.





Dawes & Arunachalam           Informational                     [Page 6]


RFC 8123                     Log Me" Marker                   March 2017


5.2.  "Log Me" Marking

   REQ3:  It MUST be possible to mark a SIP request or response to be
          considered for logging by inserting a "log me" marker.  This
          is known as "log me" marking.

   REQ4:  It MUST be possible for a "log me" marker to cross network
          boundaries.

   REQ5:  A "log me" marker MAY include an identifier that indicates the
          test case that caused it to be inserted, known as a "test case
          identifier".  The test case identifier does not have any
          impact on session setup; it is used to collate all logged SIP
          requests and responses to the initial SIP request in a dialog
          or standalone transaction.  The local Universally Unique
          Identifier (UUID) portion of the Session-ID described in
          [RFC7206] and [RFC7989] could be used as a random test case
          identifier.

5.3.  Processing the "Log Me" Marker

   REQ6:  A "log me" marker is most effective if all networks on the
          signaling path agree to pass it end-to-end.  However, source
          networks should behave responsibly and not leave it to a
          downstream network to detect and remove a marker that it is
          not expecting.

   REQ7:  The presence of a "log me" marker indicates that a request or
          response is part of debugging or regression testing.

   REQ8:  It MUST be possible to insert a "log me" marker in SIP
          responses that correspond to SIP requests with a "log me"
          marker in order to ensure that the complete SIP transaction is
          logged.  This requirement applies to endpoints, SIP/Public
          Switched Telephone Network (PSTN) gateways, and back-to-back
          user agents (B2BUAs).

   REQ9:  The "log me" marker mechanism SHOULD allow a SIP intermediary
          to request logging SIP requests and responses on behalf of the
          originating endpoint.  The typical use case for this
          requirement is for compatibility with User Agents (UAs) that
          have not implemented "log me" marking, i.e., when a UA has not
          marked a request or when responses received on a dialog of
          interest for logging do not contain an echoed "log me" marker.
          Another use case is when the session origination UA that
          inserted the "log me" marker is no longer participating in the





Dawes & Arunachalam           Informational                     [Page 7]


RFC 8123                     Log Me" Marker                   March 2017


          session (e.g., call transfer scenarios) and the intermediary
          adds a "log me" marker in related sessions to enable end-to-
          end signaling analysis.

   REQ10: The mechanism MUST allow stateless processing of SIP requests
          that contain a "log me" marker by SIP intermediaries.  This
          requirement enables the SIP intermediaries to base the
          decision to log a SIP request or response solely on the
          presence of the "log me" marker.

   REQ11: The scope of a SIP message logging request includes all
          requests and responses within a given dialog.  The scope can
          be extended to related dialogs that correspond to an end-to-
          end session for scenarios discussed in REQ9.  The "log me"
          request MUST be indicated at the beginning of the dialog of
          interest and SHOULD continue to the dialog end without any
          stop and restart during the duration of the dialog.

   REQ12: The presence of a "log me" marker might cause some SIP
          entities to log signaling.  Therefore, this marker MUST be
          removed at the earliest opportunity if it has been incorrectly
          inserted (e.g., mid-dialog or outside the configured start and
          stop of "log me" marking).

   The definition of types of events that cause logging to stop and the
   configuration of SIP entities to detect such "stop events" is outside
   the scope of this document.

6.  Security Considerations

   In order to prevent any security implications of a "log me" marker,
   the marker itself MUST NOT contain any sensitive information,
   detecting its presence or absence MUST NOT reveal sensitive
   information, and maliciously adding a "log me" marker MUST NOT
   adversely affect a network.  This section analyzes how to meet these
   requirements.

6.1.  Trust Domain

   Since a "log me" marker may cause a SIP entity to log the SIP header
   and body of a request or response, the "log me" marker MUST be
   removed at a trust domain boundary.  If a prior agreement to log
   sessions exists with the next hop network, then the "log me" marker
   SHOULD NOT be removed.







Dawes & Arunachalam           Informational                     [Page 8]


RFC 8123                     Log Me" Marker                   March 2017


6.2.  Security Threats

6.2.1.  "Log Me" Marking

   The "log me" marker MUST NOT convey any sensitive information,
   although the "log me" marker will sometimes be inserted because a
   particular device is experiencing problems.  The "log me" marker MUST
   NOT reveal any information related to any SIP user or device.

   The insertion of the "log me" marker at the endpoint MUST be approved
   by the end user or by the network administrator.  Similarly, network
   administrator authorization is required for a SIP intermediary to
   insert a "log me" marker on behalf of a UA that does not support "log
   me" marking.

   Activating a debug mode affects the operation of a terminal;
   therefore, the debugging configuration MUST be supplied by an
   authorized party to an authorized terminal through a secure
   communication channel.

6.2.2.  Logged Information

   Logged signaling is privacy-sensitive data; therefore, signaling logs
   MUST NOT be readable by an unauthorized third party.

7.  IANA Considerations

   This document does not require any IANA actions.

8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC6873]  Salgueiro, G., Gurbani, V., and A. Roach, "Format for the
              Session Initiation Protocol (SIP) Common Log Format
              (CLF)", RFC 6873, DOI 10.17487/RFC6873, February 2013,
              <http://www.rfc-editor.org/info/rfc6873>.









Dawes & Arunachalam           Informational                     [Page 9]


RFC 8123                     Log Me" Marker                   March 2017


8.2.  Informative References

   [RFC3261]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
              A., Peterson, J., Sparks, R., Handley, M., and E.
              Schooler, "SIP: Session Initiation Protocol", RFC 3261,
              DOI 10.17487/RFC3261, June 2002,
              <http://www.rfc-editor.org/info/rfc3261>.

   [RFC5853]  Hautakorpi, J., Ed., Camarillo, G., Penfield, R.,
              Hawrylyshen, A., and M. Bhatia, "Requirements from Session
              Initiation Protocol (SIP) Session Border Control (SBC)
              Deployments", RFC 5853, DOI 10.17487/RFC5853, April 2010,
              <http://www.rfc-editor.org/info/rfc5853>.

   [RFC7092]  Kaplan, H. and V. Pascual, "A Taxonomy of Session
              Initiation Protocol (SIP) Back-to-Back User Agents",
              RFC 7092, DOI 10.17487/RFC7092, December 2013,
              <http://www.rfc-editor.org/info/rfc7092>.

   [RFC7206]  Jones, P., Salgueiro, G., Polk, J., Liess, L., and H.
              Kaplan, "Requirements for an End-to-End Session
              Identification in IP-Based Multimedia Communication
              Networks", RFC 7206, DOI 10.17487/RFC7206, May 2014,
              <http://www.rfc-editor.org/info/rfc7206>.

   [RFC7989]  Jones, P., Salgueiro, G., Pearce, C., and P. Giralt, "End-
              to-End Session Identification in IP-Based Multimedia
              Communication Networks", RFC 7989, DOI 10.17487/RFC7989,
              October 2016, <http://www.rfc-editor.org/info/rfc7989>.

Acknowledgments

   The authors wish to thank Jorgen Axell, Ben Campbell, Keith Drage,
   Vijay Gurbani, Christer Holmberg, Hadriel Kaplan, Paul Kyzivat, James
   Polk, Gonzalo Salgueiro, Alberto Llamas, Brett Tate, Paul Giralt,
   Stewart Bryant, Sean Turner, and Dan Romascanu for their constructive
   comments and guidance while developing this document.














Dawes & Arunachalam           Informational                    [Page 10]


RFC 8123                     Log Me" Marker                   March 2017


Authors' Addresses

   Peter Dawes
   Vodafone Group
   The Connection
   Newbury, Berkshire  RG14 2FN
   United Kingdom

   Email: peter.dawes@vodafone.com


   Chidambaram Arunachalam
   Cisco Systems
   7200-12 Kit Creek Road
   Research Triangle Park, NC  27709
   United States of America

   Email: carunach@cisco.com

































Dawes & Arunachalam           Informational                    [Page 11]