Found 4 records.

Status: Verified (4)

RFC 2625, "IP and ARP over Fibre Channel", June 1999

Note: This RFC has been obsoleted by RFC 4338

Errata ID: 407
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Elizabeth G. Rodriguez
Date Reported: 2003-07-21

Section 7.1 says:

1. This table applies only to FC-4 related data, such as IP and
   ARP packets. This table does not apply to link services and
   other non-FC-4 sequences (PLOGI, for example) that must occur
   for normal operation.

It should say:

1. This table does not apply to FARP-REQ and FARP-REPLY.

Errata ID: 655
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Elizabeth G. Rodriguez
Date Reported: 2003-07-21

Section 7.2 says:

       1. This is REQUIRED for FC-4 (IP and ARP) packets

         - Routing bits of R_CTL field MUST indicate Device Data
           frames (0000)
         - Information Category of R_CTL field MUST indicate
           Unsolicited Data (0100)

It should say:

       1. This is REQUIRED for FC-4 (IP and ARP) packets

         - Routing bits of R_CTL field MUST indicate Device Data
           frames (0000)
         - Information Category of R_CTL field MUST indicate
           Unsolicited Data (0100)
           
           This does not apply to FARP-REQ and FARP-REPLY.

Notes:

Add a blank line and the sentence:
This does not apply to FARP-REQ and FARP-REPLY.
indented as shown so that it applies to both bulleted items.

Errata ID: 656
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Elizabeth G. Rodriguez
Date Reported: 2003-07-21

Section E.4.2 says:

      Code Points for FC Frame with FARP-REQ Command for MATCH_WW_PN_NN
 +---+----------------+----------------+----------------+------------+
 |Wrd|    <31:24>     |    <23:16>     |    <15:08>     |    <07:00> |
 +---+----------------+----------------+----------------+------------+
 | 0 |    0x04        |                     D_ID =                   |
 |   |                |    0xFF             0xFF              0xFF   |
 +---+----------------+----------------+----------------+------------+
 | 1 |    0x00        |                     S_ID                     |
 +---+----------------+----------------+----------------+------------+
 | 2 |    0x05        |                     F_CTL                    |
 +---+----------------+----------------+----------------+------------+
 | 3 |   SEQ_ID       |     0x20       |          SEQ_CNT            |
 +---+----------------+----------------+----------------+------------+

It should say:

      Code Points for FC Frame with FARP-REQ Command for MATCH_WW_PN_NN
 +---+----------------+----------------+----------------+------------+
 |Wrd|    <31:24>     |    <23:16>     |    <15:08>     |    <07:00> |
 +---+----------------+----------------+----------------+------------+
 | 0 |    0x22        |                     D_ID =                   |
 |   |                |    0xFF             0xFF              0xFF   |
 +---+----------------+----------------+----------------+------------+
 | 1 |    0x00        |                     S_ID                     |
 +---+----------------+----------------+----------------+------------+
 | 2 |    0x01        |                     F_CTL                    |
 +---+----------------+----------------+----------------+------------+
 | 3 |   SEQ_ID       |     0x00       |          SEQ_CNT            |
 +---+----------------+----------------+----------------+------------+

Notes:

This embodies three changes:
- R_CTL (word 0, bits 31:24) should be 0x22, not 0x04
- TYPE (word 2, bits 31:24) should be 0x01, not 0x05
- DF_CTL (word 3, bits 23:16) should be 0x00, not 0x20

Errata ID: 657
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Elizabeth G. Rodriguez
Date Reported: 2003-07-21

Section E.4.2 says:

             Code Points for FC Frame with FARP-REPLY Command
 +---+----------------+----------------+----------------+------------+
 |Wrd|    <31:24>     |    <23:16>     |    <15:08>     |    <07:00> |
 +---+----------------+----------------+----------------+------------+
 | 0 |    0x04        |                     D_ID                     |
 +---+----------------+----------------+----------------+------------+
 | 1 |    0x00        |                     S_ID                     |
 +---+----------------+----------------+----------------+------------+
 | 2 |    0x05        |                     F_CTL                    |
 +---+----------------+----------------+----------------+------------+
 | 3 |   SEQ_ID       |     0x20       |          SEQ_CNT            |
 +---+----------------+----------------+----------------+------------+

It should say:

             Code Points for FC Frame with FARP-REPLY Command
 +---+----------------+----------------+----------------+------------+
 |Wrd|    <31:24>     |    <23:16>     |    <15:08>     |    <07:00> |
 +---+----------------+----------------+----------------+------------+
 | 0 |    0x23        |                     D_ID                     |
 +---+----------------+----------------+----------------+------------+
 | 1 |    0x00        |                     S_ID                     |
 +---+----------------+----------------+----------------+------------+
 | 2 |    0x01        |                     F_CTL                    |
 +---+----------------+----------------+----------------+------------+
 | 3 |   SEQ_ID       |     0x00       |          SEQ_CNT            |
 +---+----------------+----------------+----------------+------------+

Notes:

This embodies three changes:
- R_CTL (word 0, bits 31:24) should be 0x23, not 0x04
- TYPE (word 2, bits 31:24) should be 0x01, not 0x05
- DF_CTL (word 3, bits 23:16) should be 0x00, not 0x20

Report New Errata