Found 4 records.

Status: Verified (4)

RFC 4842, "Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet (CEP)", April 2007

Errata ID: 1064
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Alfred Hoenes
Date Reported: 2007-05-17

Section 11.2.1.1 says:

   The 28 bits of the EBM are divided into groups of 4 bits, each
   corresponding to a different VTG within the STS container.  All 4 
   bits are used to indicate whether VT1.5 (T1) tributaries are carried
   within a VTG.  The first 3 bits read from right to left are used to
   indicate whether VT2 (E1) tributaries are carried within a VTG.  The
   first 2 bits are used to indicate whether VT3 (DS1C) tributaries are    
   carried within a VTG.

It should say:

   The 28 bits of the EBM are divided into groups of 4 bits, each
   corresponding to a different VTG within the STS container.  All 4
   bits are used to indicate whether VT1.5 (T1) tributaries are carried
   within a VTG.  The 3 rightmost bits in a bit group are used to    
   indicate whether VT2 (E1) tributaries are carried within a VTG.
   The 2 rightmost bits in a bit group are used to indicate whether  
   VT3 (DS1C) tributaries are carried within a VTG.

Notes:

Replaced 'first 3 bits read from right to left' with '3 rightmost
bits' and similarly 'first 2 bits' with '2 rightmost bits'. The
new text avoids possible confusion with regards to the position
of the relevant bits.

from pending

Errata ID: 1065

Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Alfred Hoenes
Date Reported: 2007-05-17
Date Verified: 2011-02-01
Report Text:

   The notation B*3 was replaced with the notation B3* which is
   consistent with the definitions.

from pending

Errata ID: 1066
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Alfred Hoenes
Date Reported: 2007-05-17

Section 11.2.3.2 says:

                     All 4 bits are used to indicate whether VC-11 (T1)    
   tributaries are carried within a TUG-2.  The first 3 bits read right
   to left are used to indicate whether VC-12 (E1) tributaries are
   carried within a TUG-2.  The first bit is used to indicate that a
   VC-2 is carried within a TUG-2.

It should say:

                     All 4 bits are used to indicate whether VC-11 (T1)
   tributaries are carried within a TUG-2.  The rightmost 3 bits are 
   used to indicate whether VC-12 (E1) tributaries are carried within a
   TUG-2.  The rightmost bit is used to indicate that a VC-2 is carried
   within a TUG-2.

Notes:

Replaced 'first 3 bits read from right to left' with '3 rightmost
bits' and similarly 'first 2 bits' with '2 rightmost bits'. The
new text avoids possible confusion with regards to the position
of the relevant bits.

from pending

Errata ID: 6718
Status: Verified
Type: Editorial
Publication Format(s) : TEXT
Reported By: Lars Eggert
Date Reported: 2021-10-21
Verifier Name: Martin Vigoureux
Date Verified: 2021-11-03

Section 18.1 says:

   [RTP]           Schulzrinne, H., Casner, S., Frederick, R., and V.
                   Jacobson, "RTP: A Transport Protocol for Real-Time
                   Applications", STD 64, RFC 3005, July 2003.

It should say:

   [RTP]           Schulzrinne, H., Casner, S., Frederick, R., and V.
                   Jacobson, "RTP: A Transport Protocol for Real-Time
                   Applications", STD 64, RFC 3550, July 2003.

Notes:

The RFC number for [RTP] should be 3550, not 3005.

Report New Errata