RFC 826, "An Ethernet Address Resolution Protocol: Or Converting Network Protocol Addresses to 48.bit Ethernet Address for Transmission on Ethernet Hardware", November 1982

Note: This RFC has been updated by RFC 5227, RFC 5494

Errata ID: 7909
Status: Verified
Type: Editorial
Publication Format(s) : TEXT
Reported By: Alexander Bondarenko
Date Reported: 2024-04-26
Verifier Name: Eric Vyncke
Date Verified: 2024-04-26

The "Packet format" section says:

        16.bit: (ar$pro) Protocol address space.  For Ethernet
                         hardware, this is from the set of type
                         fields ether_typ$<protocol>.

It should say:

        16.bit: (ar$pro) Protocol address space.  For Ethernet
                         hardware, this is from the set of type
                         fields ether_type$<protocol>.

Notes:

In original text last letter "e" is missing in "ether_type$<protocol>".

--- Verifier note (Eric Vyncke, INT AD) ---
After reclassification into "editorial", this erratum is approved.

Report New Errata