RFC 6325, "Routing Bridges (RBridges): Base Protocol Specification", July 2011

Note: This RFC has been updated by RFC 6327, RFC 6439, RFC 7172, RFC 7177, RFC 7357, RFC 7179, RFC 7180, RFC 7455, RFC 7780, RFC 7783, RFC 8139, RFC 8249, RFC 8361, RFC 8377

Errata ID: 3053
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Donald E. Eastlake, 3rd
Date Reported: 2011-12-15
Verifier Name: Ralph Droms
Date Verified: 2013-03-09

Section 4.3.2 says:

If X is not greater than Sz, then RB1 sets the "failed minimum MTU
test" flag for RB2 in RB1's Hello. If size X succeeds, and X > Sz,
then RB1 advertises the largest tested X for each adjacency in the
TRILL Hellos RB1 sends on that link, and RB1 MAY advertise X as an
attribute of the link to RB2 in RB1's LSP.

It should say:

If X is not greater than or equal to Sz, then RB1 sets the "failed
minimum MTU test" flag for RB2 in RB1's Hello. If size X succeeds, and
X >= Sz, then RB1 advertises the largest tested X for each adjacency
in the TRILL Hellos RB1 sends on that link, and RB1 MAY advertise X as
an attribute of the link to RB2 in RB1's LSP.

Report New Errata