RFC 4601, "Protocol Independent Multicast - Sparse Mode (PIM-SM): Protocol Specification (Revised)", August 2006

Note: This RFC has been obsoleted by RFC 7761

Note: This RFC has been updated by RFC 5059, RFC 5796, RFC 6226

Errata ID: 1158
Status: Rejected
Type: Editorial
Publication Format(s) : TEXT
Reported By: Maren Peasley
Date Reported: 2007-12-21
Rejected by: Adrian Farrel
Date Rejected: 2009-08-26

Section 4.5.3 says:

+------------++--------------------------------------------------------+
|            ||                         Event                          |
|            ++-------------+--------------+-------------+-------------+
|Prev State  ||Receive      | Receive      | Prune-      | Expiry Timer|
|            ||Join(S,G)    | Prune(S,G)   | Pending     | Expires     |
|            ||             |              | Timer       |             |
|            ||             |              | Expires     |             |
+------------++-------------+--------------+-------------+-------------+
|            ||-> J state   | -> NI state  | -           | -           |
|NoInfo (NI) ||start Expiry |              |             |             |
|            ||Timer        |              |             |             |
+------------++-------------+--------------+-------------+-------------+
|            ||-> J state   | -> PP state  | -           | -> NI state |
|Join (J)    ||restart      | start Prune- |             |             |
|            ||Expiry Timer | Pending      |             |             |
|            ||             | Timer        |             |             |
+------------++-------------+--------------+-------------+-------------+
|Prune-      ||-> J state   | -> PP state  | -> NI state | -> NI state |
|Pending (PP)||restart      |              | Send Prune- |             |
|            ||Expiry Timer |              | Echo(S,G)   |             |
+------------++-------------+--------------+-------------+-------------+

It should say:

+------------++--------------------------------------------------------+
|            ||                         Event                          |
|            ++-------------+--------------+-------------+-------------+
|Prev State  ||Receive      | Receive      | Prune-      | Expiry Timer|
|            ||Join(S,G)    | Prune(S,G)   | Pending     | Expires     |
|            ||             |              | Timer       |             |
|            ||             |              | Expires     |             |
+------------++-------------+--------------+-------------+-------------+
|            ||-> J state   | -            | -           | -           |
|NoInfo (NI) ||start Expiry |              |             |             |
|            ||Timer        |              |             |             |
+------------++-------------+--------------+-------------+-------------+
|            ||-> J state   | -> PP state  | -           | -> NI state |
|Join (J)    ||restart      | start Prune- |             |             |
|            ||Expiry Timer | Pending      |             |             |
|            ||             | Timer        |             |             |
+------------++-------------+--------------+-------------+-------------+
|Prune-      ||-> J state   | -            | -> NI state | -> NI state |
|Pending (PP)||restart      |              | Send Prune- |             |
|            ||Expiry Timer |              | Echo(S,G)   |             |
+------------++-------------+--------------+-------------+-------------+

Notes:

At the intersection of “NoInfo (NI)” and “ReceivePrune(S,G)” it is noted that there is a change of state to “NI”, which is the current state – this is unnecessary. At the intersection of “PrunePending (PP)” and “ReceivePrune(S,G)” it is noted that there is a change of state to “PP”, which is the current state – this is unnecessary.
--VERIFIER NOTES--
It is perfectly possible to parse this with a basic knowledge of the protocol states and events.

Report New Errata