RFC 4601, "Protocol Independent Multicast - Sparse Mode (PIM-SM): Protocol Specification (Revised)", August 2006

Note: This RFC has been obsoleted by RFC 7761

Note: This RFC has been updated by RFC 5059, RFC 5796, RFC 6226

Errata ID: 1122
Status: Held for Document Update
Type: Technical
Publication Format(s) : TEXT
Reported By: Maren Peasley
Date Reported: 2007-12-21
Held for Document Update by: David Ward
Date Held: 2009-03-22

Section 4.5.4 says:

   On unnumbered interfaces on point-to-point links, the router's
   address should be the same as the source address it chose for the
   Hello message it sent over that interface.  However, on point-to-
   point links we also recommend that PIM Join/Prune messages with an
   upstream neighbor address field of all zeros are also accepted.

It should say:

   On unnumbered interfaces on point-to-point links, the router's
   address SHOULD be the same as the source address it chose for the
   Hello message it sent over that interface.  However, on point-to-
   point links we also RECOMMEND that PIM Join/Prune messages with an
   upstream neighbor address field of all zeros are also accepted.

Notes:

RFC 2119 keywords are not capitalized.

Report New Errata