RFC 6375
A Packet Loss and Delay Measurement Profile for MPLS-Based Transport Networks, September 2011
- File formats:
- Status:
- INFORMATIONAL
- Authors:
- D. Frost, Ed.
S. Bryant, Ed. - Stream:
- IETF
- Source:
- mpls (rtg)
Cite this RFC: TXT | XML | BibTeX
DOI: https://doi.org/10.17487/RFC6375
Discuss this RFC: Send questions or comments to the mailing list mpls@ietf.org
Other actions: Submit Errata | Find IPR Disclosures from the IETF | View History of RFC 6375
Abstract
Procedures and protocol mechanisms to enable efficient and accurate measurement of packet loss, delay, and throughput in MPLS networks are defined in RFC 6374.
The MPLS Transport Profile (MPLS-TP) is the set of MPLS protocol functions applicable to the construction and operation of packet- switched transport networks.
This document describes a profile of the general MPLS loss, delay, and throughput measurement techniques that suffices to meet the specific requirements of MPLS-TP.
This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunication Union Telecommunication Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge (PWE3) architectures to support the capabilities and functionalities of a packet transport network as defined by the ITU-T. This document is not an Internet Standards Track specification; it is published for informational purposes.
For the definition of Status, see RFC 2026.
For the definition of Stream, see RFC 8729.