RFC 4798
Connecting IPv6 Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE), February 2007
- File formats:
- Status:
- PROPOSED STANDARD
- Authors:
- J. De Clercq
D. Ooms
S. Prevost
F. Le Faucheur - Stream:
- IETF
- Source:
- idr (rtg)
Cite this RFC: TXT | XML | BibTeX
DOI: https://doi.org/10.17487/RFC4798
Discuss this RFC: Send questions or comments to the mailing list idr@ietf.org
Other actions: Submit Errata | Find IPR Disclosures from the IETF | View History of RFC 4798
Abstract
This document explains how to interconnect IPv6 islands over a Multiprotocol Label Switching (MPLS)-enabled IPv4 cloud. This approach relies on IPv6 Provider Edge routers (6PE), which are Dual Stack in order to connect to IPv6 islands and to the MPLS core, which is only required to run IPv4 MPLS. The 6PE routers exchange the IPv6 reachability information transparently over the core using the Multiprotocol Border Gateway Protocol (MP-BGP) over IPv4. In doing so, the BGP Next Hop field is used to convey the IPv4 address of the 6PE router so that dynamically established IPv4-signaled MPLS Label Switched Paths (LSPs) can be used without explicit tunnel configuration. [STANDARDS-TRACK]
For the definition of Status, see RFC 2026.
For the definition of Stream, see RFC 8729.