RFC 3626

Optimized Link State Routing Protocol (OLSR), October 2003

Canonical URL:
https://www.rfc-editor.org/rfc/rfc3626.txt
File formats:
Plain TextPDF
Status:
EXPERIMENTAL
Authors:
T. Clausen, Ed.
P. Jacquet, Ed.
Stream:
IETF
Source:
manet (rtg)

Cite this RFC: TXT  |  XML

DOI:  10.17487/RFC3626

Discuss this RFC: Send questions or comments to manet@ietf.org

Other actions: View Errata  |  Submit Errata  |  Find IPR Disclosures from the IETF


Abstract

This document describes the Optimized Link State Routing (OLSR) protocol for mobile ad hoc networks. The protocol is an optimization of the classical link state algorithm tailored to the requirements of a mobile wireless LAN. The key concept used in the protocol is that of multipoint relays (MPRs). MPRs are selected nodes which forward broadcast messages during the flooding process. This technique substantially reduces the message overhead as compared to a classical flooding mechanism, where every node retransmits each message when it receives the first copy of the message. In OLSR, link state information is generated only by nodes elected as MPRs. Thus, a second optimization is achieved by minimizing the number of control messages flooded in the network. As a third optimization, an MPR node may chose to report only links between itself and its MPR selectors. Hence, as contrary to the classic link state algorithm, partial link state information is distributed in the network. This information is then used for route calculation. OLSR provides optimal routes (in terms of number of hops). The protocol is particularly suitable for large and dense networks as the technique of MPRs works well in this context.


For the definition of Status, see RFC 2026.

For the definition of Stream, see RFC 4844.


Download PDF Reader