RFC Errata


Errata Search
 
Source of RFC  
Summary Table Full Records

Found 3 records.

Status: Verified (1)

RFC 6716, "Definition of the Opus Audio Codec", September 2012

Note: This RFC has been updated by RFC 8251

Source of RFC: codec (rai)

Errata ID: 4853
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Rostislav Pehlivanov
Date Reported: 2016-11-02
Verifier Name: Ben Campbell
Date Verified: 2016-11-02

Section 5.1.1 says: 

                                    rng
                        rng = rng - --- * (fh - fl)
                                    ft

It should say:

                                    rng
                        rng = rng - --- * (ft - fh)
                                    ft

Notes:

Equation should match with the one in the range decoder (section 4.1.2), however comparing the two and the reference implementation reveals the equation in section 5.1.1 to be incorrect.

Status: Held for Document Update (2)

RFC 6716, "Definition of the Opus Audio Codec", September 2012

Note: This RFC has been updated by RFC 8251

Source of RFC: codec (rai)

Errata ID: 4392
Status: Held for Document Update
Type: Technical
Publication Format(s) : TEXT
Reported By: Peter Budny
Date Reported: 2015-06-15
Held for Document Update by: Ben Campbell
Date Held: 2015-06-15

Section 2 says: 

The Opus codec scales from 6 kbit/s narrowband mono speech to
510 kbit/s fullband stereo music, with algorithmic delays ranging
from 5 ms to 65.2 ms.

(further in the same section)

To
compensate for the different look-ahead required by each layer, the
CELT encoder input is delayed by an additional 2.7 ms.

It should say:

The Opus codec scales from 6 kbit/s narrowband mono speech to
510 kbit/s fullband stereo music, with algorithmic delays ranging
from 5 ms to 66.5 ms.

(further in the same section)

To
compensate for the different look-ahead required by each layer, the
CELT encoder input is delayed by an additional 4 ms.

Notes:

For the latter text, the delays for the CELT and SILK layers must match. SILK has a "5 ms look-ahead for noise shaping estimation", and "1.5 ms delay for sampling rate conversion", totaling 6.5 ms. CELT has a "2.5 ms look-ahead due to the overlapping MDCT windows". Thus, the amount of delay needed to align CELT with SILK is 6.5ms - 2.5ms = 4ms.

The text at the beginning of the section must reflect this as well. The "algorithmic delays" reported apparently include framing (minimum frame size 2.5ms + look-ahead delay in CELT-only mode 2.5ms = 5ms). In that case, the maximum delay is the maximum frame size (60ms) + the maximum delay for look-ahead and resampling (6.5ms) = 66.5ms.

Confirmed by author ("Jmvalin") at https://en.wikipedia.org/wiki/Talk:Opus_(audio_format)/Archive_1#Codec_delay_values

Errata ID: 4829
Status: Held for Document Update
Type: Editorial
Publication Format(s) : TEXT
Reported By: flacs
Date Reported: 2016-10-12
Held for Document Update by: Ben Campbell
Date Held: 2016-11-02

Throughout the document, when it says: 

Coeffieients

It should say:

Coefficients

Notes:

Just a small typo in the Table of Contents.

Report New Errata



Advanced Search