RFC Errata


Errata Search

 
Source of RFC  
Summary Table Full Records

Found 6 records.

Status: Verified (5)

RFC 2637, "Point-to-Point Tunneling Protocol (PPTP)", July 1999

Source of RFC: pppext (int)

Errata ID: 6287
Status: Verified
Type: Technical
Publication Format(s) : TEXT

Reported By: Casper van Eersel
Date Reported: 2020-09-13
Verifier Name: Eric Vyncke
Date Verified: 2023-08-03

Section 3.2.3 says:

When the PAC receives the Outgoing-Call-Reply, it attempts to connect the call, assuming the calling party has not hung up.

It should say:

When the PAC receives the Incoming-Call-Reply, it attempts to connect the call, assuming the calling party has not hung up.

Notes:

The PAC does not receive Outgoing-Call-Reply messages, as also indicated in sections 3.2.4.1 and 3.2.4.2. It receives Incoming-Call-Reply messages, as indicated in sections 3.2.3.1 and 3.2.3.2.

Errata ID: 4790
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Nikolai Malykh
Date Reported: 2016-09-01

Section 2.2 says:

   Error Code               This field is set to 0 unless a "General
                            Error" exists, in which case Result Code is
                            set to 2 and this field is set to the value
                            corresponding to the general error condition
                            as specified in section 2.2.

It should say:

   Error Code               This field is set to 0 unless a "General
                            Error" exists, in which case Result Code is
                            set to 2 and this field is set to the value
                            corresponding to the general error condition
                            as specified in section 2.16.

Notes:

Incorrect reference to section 2.2.

Note - Similar pointers occur in Sections 2.4, 2.6, 2.8, 2.10, 2.13.

Errata ID: 4791
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Nikolai Malykh
Date Reported: 2016-09-01
Verifier Name: Éric Vyncke
Date Verified: 2024-01-12

Section 2.4 says:

   Error Code               This field is set to 0 unless a "General
                            Error" exists, in which case Result Code is
                            set to 2 and this field is set to the value
                            corresponding to the general error condition
                            as specified in section 2.2.

It should say:

   Error Code               This field is set to 0 unless a "General
                            Error" exists, in which case Result Code is
                            set to 2 and this field is set to the value
                            corresponding to the general error condition
                            as specified in section 2.16.

Notes:

Incorrect reference to section 2.2

Errata ID: 4792
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Nikolai Malykh
Date Reported: 2016-09-01
Verifier Name: Éric Vyncke
Date Verified: 2024-01-12

Section 2.6 says:

   Error Code               This field is set to 0 unless a "General
                            Error" condition exists, in which case
                            Result Code is set to 2 and this field is
                            set to the value corresponding to the
                            general error condition as specified in
                            section 2.2.

It should say:

   Error Code               This field is set to 0 unless a "General
                            Error" condition exists, in which case
                            Result Code is set to 2 and this field is
                            set to the value corresponding to the
                            general error condition as specified in
                            section 2.16.

Notes:

Incorrect reference to section 2.2

Errata ID: 4793
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Nikolai Malykh
Date Reported: 2016-09-01
Verifier Name: Éric Vyncke
Date Verified: 2024-01-12

Section 2.8 says:

   Error Code               This field is set to 0 unless a "General
                            Error" condition exists, in which case
                            Result Code is set to 2 and this field is
                            set to the value corresponding to the
                            general error condition as specified in
                            section 2.2.

It should say:

   Error Code               This field is set to 0 unless a "General
                            Error" condition exists, in which case
                            Result Code is set to 2 and this field is
                            set to the value corresponding to the
                            general error condition as specified in
                            section 2.16.

Notes:

Incorrect reference to section 2.2.

Status: Held for Document Update (1)

RFC 2637, "Point-to-Point Tunneling Protocol (PPTP)", July 1999

Source of RFC: pppext (int)

Errata ID: 6288
Status: Held for Document Update
Type: Editorial
Publication Format(s) : TEXT

Reported By: Casper van Eersel
Date Reported: 2020-09-13
Held for Document Update by: Eric Vyncke
Date Held: 2023-08-03

Section 2.14 says:

Th Call ID assigned by the PNS to this call.

It should say:

The Call ID assigned by the PNS to this call.

Notes:

A missing ‘e’ in ‘Th’.

Report New Errata



Advanced Search