errata logo graphic

Found 1 record.

Status: Verified (1)

RFC4207, "Synchronous Optical Network (SONET)/Synchronous Digital Hierarchy (SDH) Encoding for Link Management Protocol (LMP) Test Messages", October 2005

Source of RFC: ccamp (rtg)

Errata ID: 167

Status: Verified
Type: Editorial

Reported By: Alfred Hoenes
Date Reported: 2005-12-20
Verifier Name: Adrian Farrel
Date Verified: 2010-01-02

Section 4.1.1 says:

           [...]  The format of the TraceMonitor message is as
  follows:

   <TraceMonitor Message> ::= <Common Header> <MESSAGE_ID>
                              <LOCAL_INTERFACE_ID> <TRACE>

It should say:

<< THIS CHANGE IS REJECTED >>
<< See the Notes field for the revised editorial change. >>

           [...]  The format of the TraceMonitor message is as
  follows:

   <TraceMonitor Message> ::= <Common Header> <MESSAGE_ID>
                              <LOCAL_INTERFACE_ID>
                              <TRACE> ...

Notes:

<Original note>
> RFC 4207 defines the syntax of the TraceMonitor message in Section
> 4.1.1, on page 6.
> Similarly, the TraceMonitorAck and TraceMonitorNack Messages are
> specified in Sections 4.1.2 and 4.1.3, respectively, on page 8.
>
> While the former specifies a single <TRACE> object to appear
> in a TraceMonitor message, the latter specs uses wording like
> "all of the TRACE Objects in a TraceMonitor message" or
> "TRACE object value(s)".
>
> IMHO, it makes much sense to indeed allow multiple TRACE Objects
> (with different trace types, but all related to a single Interface)
> in a single TraceMonitor Message.
</Original note>

CCAMP consensus on this issue is that the BNF is correct. That is, only a single instance of the <TRACE> object is permitted on the <TraceMonitor Message> or any of the other messages.

The text in the various sections is factually correct when it says things like "all the Trace Objects..." However, this is misleading and should be changed to be singlular in all cases.


Report New Errata