[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]
PROPOSED STANDARD
Errata ExistNetwork Working Group J. Park
Request for Comments: 4683 J. Lee
Category: Standards Track H. Lee
KISA
S. Park
BCQRE
T. Polk
NIST
October 2006
Internet X.509 Public Key Infrastructure
Subject Identification Method (SIM)
Status of This Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
This document defines the Subject Identification Method (SIM) for
including a privacy-sensitive identifier in the subjectAltName
extension of a certificate.
The SIM is an optional feature that may be used by relying parties to
determine whether the subject of a particular certificate is also the
person corresponding to a particular sensitive identifier.
Park, et al. Standards Track [Page 1]
RFC 4683 Subject Identification Method October 2006
Table of Contents
1. Introduction ....................................................2
1.1. Key Words ..................................................5
2. Symbols .........................................................6
3. Requirements ....................................................6
3.1. Security Requirements ......................................6
3.2. Usability Requirements .....................................7
3.3. Solution ...................................................7
4. Procedures ......................................................8
4.1. SII and SIItype ............................................8
4.2. User Chosen Password .......................................9
4.3. Random Number Generation ...................................9
4.4. Generation of SIM ..........................................9
4.5. Encryption of PEPSI .......................................10
4.6. Certification Request .....................................10
4.7. Certification .............................................11
5. Definition .....................................................11
5.1. SIM Syntax ................................................11
5.2. PEPSI .....................................................12
5.3. Encrypted PEPSI ...........................................12
6. Example Usage of SIM ...........................................13
7. Name Constraints ...............................................13
8. Security Considerations ........................................14
9. Acknowledgements ...............................................15
10. IANA Considerations ...........................................15
11. References ....................................................15
11.1. Normative References .....................................15
11.2. Informative References ...................................15
Appendix A. "Compilable" ASN.1 Module, 1988 Syntax ...............18
1. Introduction
A Certification Authority (CA) issues X.509 public key certificates
to bind a public key to a subject. The subject is specified through
one or more subject names in the "subject" or "subjectAltName" fields
of a certificate. The "subject" field contains a hierarchically
structured distinguished name. The "subjectAltName field" may
contain an electronic mail address, IP address, or other name forms
that correspond to the subject.
For each particular CA, a subject name corresponds to a unique
person, device, group, or role. The CA will not knowingly issue
certificates to multiple entities under the same subject name. That
is, for a particular certificate issuer, all currently valid
certificates asserting the same subject name(s) are bound to the same
entity.
Park, et al. Standards Track [Page 2]
RFC 4683 Subject Identification Method October 2006
Where the subject is a person, the name that is specified in the
subject field of the certificate may reflect the name of the
individual and affiliated entities (e.g., their corporate
affiliation). In reality, however, there are individuals or
corporations that have the same or similar names. It may be
difficult for a relying party (e.g., a person or application) to
associate the certificate with a specific person or organization
based solely on the subject name. This ambiguity presents a problem
for many applications.
In some cases, applications or relying parties need to ensure that
the subject of certificates issued by different CAs are in fact the
same entity. This requirement may be met by including a "permanent
identifier" in all certificates issued to the same subject, which is
unique across multiple CAs. By comparing the "permanent identifier",
the relying party may identify certificates from different CAs that
are bound to the same subject. This solution is defined in [RFC
4043].
In many cases, a person's or corporation's identifier (e.g., a Social
Security Number) is regarded as sensitive, private, or personal data.
Such an identifier cannot simply be included as part of the subject
field, since its disclosure may lead to misuse. Therefore, privacy-
sensitive identifiers of this sort should not be included in
certificates in plaintext form.
On the other hand, such an identifier is not actually a secret.
People choose to disclose these identifiers for certain classes of
transactions. For example, a person may disclose a Social Security
Number to open a bank account or obtain a loan. This is typically
corroborated by presenting physical credentials (e.g., a driver's
license) that confirm the person's name or address.
To support such applications in an online environment, relying
parties need to determine whether the subject of a particular
certificate is also the person corresponding to a particular
sensitive identifier. Ideally, applications would leverage the
applicants' electronic credential (e.g., the X.509 public key
certificate) to corroborate this identifier, but the subject field of
a certificate often does not provide sufficient information.
To fulfill these demands, this specification defines the Subject
Identification Method (SIM) and the Privacy-Enhanced Protected
Subject Information (PEPSI) format for including a privacy sensitive
identifier in a certificate. Although other solutions for binding
privacy-sensitive identifiers to a certificate could be developed,
the method specified in this document has especially attractive
properties. This specification extends common PKI practices and
Park, et al. Standards Track [Page 3]
RFC 4683 Subject Identification Method October 2006
mechanisms to allow privacy-sensitive identifiers to be included in
the certificate as well. The SIM mechanism also permits the subject
to control exposure of the sensitive identifier; when the subject
chooses to expose the sensitive identifier, relying parties can
verify the binding. Specifically:
(1) A Public Key Infrastructure (PKI) depends upon a trusted third
party -- the CA -- to bind one or more identities to a public key.
Traditional PKI implementations bind X.501 distinguished names to the
public key, but identity may also be specified in terms of RFC 822
addresses or DNS names. The SIM specification allows the same
trusted third party -- the CA -- that binds a name to the public key
to include a privacy-sensitive identifier in the certificate as well.
Since the relying party (RP) already trusts the CA to issue
certificates, it is a simple extension to cover verification and
binding of a sensitive identifier as well. This binding could be
established separately, by another trusted third party, but this
would complicate the infrastructure.
(2) This specification leverages standard PKI extensions to achieve
new functional goals with a minimum of new code. This specification
encodes the sensitive identifier in the otherName field in the
alternative subject name extension. Since otherName field is widely
used, this solution leverages a certificate field that is often
populated and processed. (For example, smart card logon
implementations generally rely upon names encoded in this field.)
Whereas implementations of this specification will require some SIM-
specific code, an alternative format would increase cost without
enhancing security. In addition, that has no impact on
implementations that do not process sensitive identifiers.
(3) By explicitly binding the public key to the identifier, this
specification allows the relying party to confirm the claimant's
identifier and confirm that the claimant is the subject of that
identifier. That is, proof of possession of the private key confirms
that the claimant is the same person whose identity was confirmed by
the PKI (CA or RA, depending upon the architecture).
To achieve the same goal in a separate message (e.g., a signed and
encrypted Secure MIME (S/MIME) object), the message would need to be
bound to the certificate or an identity in the certificate (e.g., the
X.501 distinguished name). The former solution is problematic, since
certificates expire. The latter solution may cause problems if names
are ever reused in the infrastructure. An explicit binding in the
certificate is a simpler solution, and more reliable.
Park, et al. Standards Track [Page 4]
RFC 4683 Subject Identification Method October 2006
(4) This specification allows the subject of the privacy-sensitive
identifier to control the distribution and level of security applied
to the identifier. The identifier is only disclosed when the subject
chooses to disclose it, even if the certificate is posted in a public
directory. By choosing a strong password, the subject can ensure
that the identifier is protected against brute force attacks. This
specification permits subjects to selectively disclose an identifier
where they deem it appropriate, which is consistent with common use
of such identifiers.
(5) Certificates that contain a sensitive identifier may still be
used to support other applications. A party that obtains a
certificate containing a sensitive identifier, but to whom the
subject does not choose to disclose the identifier, must perform a
brute force attack to obtain the identifier. By selecting a strong
hash algorithm, this attack becomes computationally infeasible.
Moreover, when certificates include privacy-sensitive identifiers as
described in this specification, each certificate must be attacked
separately. Finally, the subjects can use this mechanism to prove
they possess a certificate containing a particular type of identifier
without actually disclosing it to the relying party.
This feature MUST be used only in conjunction with protocols that
make use of digital signatures generated using the subject's private
key.
In addition, this document defines an Encrypted PEPSI (EPEPSI) so
that sensitive identifier information can be exchanged during
certificate issuance processes without disclosing the identifier to
an eavesdropper.
This document is organized as follows:
- Section 3 establishes security and usability requirements;
- Section 4 provides an overview of the mechanism;
- Section 5 defines syntax and generation rules; and
- Section 6 provides example use cases.
1.1. Key Words
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
Park, et al. Standards Track [Page 5]
RFC 4683 Subject Identification Method October 2006
2. Symbols
The following cryptography symbols are defined in this document.
H() Cryptographically secure hash algorithm.
SHA-1 [FIPS 180-1] or a more secure hash function is
required.
SII Sensitive Identification Information
(e.g., Social Security Number).
SIItype Object Identifier that identifies the type of SII.
P A user-chosen password.
R The random number value generated by a Registration
Authority (RA).
PEPSI Privacy-Enhanced Protected Subject Information.
Calculated from the input value P, R, SIItype, SII
using two iteration of H().
E() The encryption algorithm to encrypt the PEPSI value.
EPEPSI Encrypted PEPSI.
D() The decryption algorithm to decrypt the EPEPSI.
3. Requirements
3.1. Security Requirements
We make the following assumptions about the context in which SIM and
PEPSI are to be employed:
- Alice, a certificate holder, with a sensitive identifier SIIa
(such as her Social Security Number)
- Bob, a relying party who will require knowledge of Alice's SIIa
- Eve, an attacker who acquires Alice's certificate
- An RA to whom Alice must divulge her SIIa
- A CA who will issue Alice's certificate
We wish to design SIM and PEPSI, using a password that Alice chooses,
that has the following properties:
- Alice can prove her SII, SIIa to Bob.
Park, et al. Standards Track [Page 6]
RFC 4683 Subject Identification Method October 2006
- Eve has a large work factor to determine Alice's SIIa from
Alice's certificate, even if Alice chooses a weak password, and a
very large work factor if Alice chooses a good password.
- Even if Eve can determine SIIa, she has an equally hard problem
to find any other SII values from any other PEPSI; that is, there
is nothing she can pre-compute that helps her attack PEPSIs in
other certificates, and nothing she learns from a successful
attack that helps in any other attack.
- The CA does not learn Alice's SIIa except in the case where the
CA needs to validate the SII passed by the RA.
- The CA can treat the SIM as an additional name form in the
"subjectAltName" extension with no special processing.
- Alice cannot find another SII (SIIx), and a password (P), that
will allow her to use her certificate to assert a false SII.
3.2. Usability Requirements
In addition to the security properties stated above, we have the
following usability requirements:
- When SIM and PEPSI are used, any custom processing occurs at the
relying party. Alice can use commercial off-the-shelf software
(e.g., a standard browser) without modification in conjunction
with a certificate containing a SIM value.
3.3. Solution
We define SIM as: R || PEPSI
where PEPSI = H(H( P || R || SIItype || SII))
The following steps describe construction and use of SIM:
1. Alice picks a password P, and gives P, SIItype, and SII to
the RA (via a secure channel).
2. The RA validates SIItype and SII; i.e., it determines that
the SII value is correctly associated with the subject and
the SIItype is correct.
3. The RA generates a random value R.
4. The RA generates the SIM = (R || PEPSI) where PEPSI = H(H(P
|| R || SIItype || SII)).
5. The RA sends the SIM to Alice by some out-of-band means and
also passes it to the CA.
6. Alice sends a certRequest to CA. The CA generates Alice's
certificate including the SIM as a form of otherName from the
GeneralName structure in the subjectAltName extension.
7. Alice sends Bob her Cert, as well as P, SIItype, and SII.
The latter values must be communicated via a secure
communication channel, to preserve their confidentiality.
Park, et al. Standards Track [Page 7]
RFC 4683 Subject Identification Method October 2006
8. Bob can compute PEPSI' = H(H(P || R || SIItype || SII)) and
compare SIM' = R || PEPSI' to the SIM value in Alice's
certificate, thereby verifying SII.
If Alice's SII value is not required by Bob (Bob already knows
Alice's SII and does not require it), then steps 7 and 8 are as
follows:
7. Alice sends Bob her Cert and P. P must be sent via a secure
communication channel, to preserve its confidentiality.
8. Bob can compute PEPSI' = H(H(P || R || SIItype || SII)) and
compare SIM' = R || PEPSI' to the value in the SIM, thereby
verifying SII.
If Alice wishes to prove she is the subject of an RA-validated
identifier, without disclosing her identifier to Bob, then steps 7
and 8 are as follows:
7. Alice sends the intermediate value H(P || R || SIItype ||
SII) and her certificate to Bob.
8. Bob can get R from the SIM in the certificate, then compute H
(intermediate value) and compare it to the value in SIM,
thereby verifying Alice's knowledge of P and SII.
Eve has to exhaustively search the H(P || R || SIItype || SII) space
to find Alice's SII. This is a fairly hard problem even if Alice
uses a poor password, because of the size of R (as specified later),
and a really hard problem if Alice uses a fairly good password (see
Section 8).
Even if Eve finds Alice's P and SII, or constructs a massive
dictionary of P and SII values, it does not help find any other SII
values, because a new R is used for each PEPSI and SIM.
4. Procedures
4.1. SII and SIItype
The user presents evidence that a particular SII has been assigned to
him/her. The SIItype is an Object Identifier (OID) that defines the
format and scope of the SII value. For example, in Korea, one
SIItype is defined as follows:
-- KISA specific arc
id-KISA OBJECT IDENTIFIER ::=
{iso(1) member-body(2) korea(410) kisa(200004)}
Park, et al. Standards Track [Page 8]
RFC 4683 Subject Identification Method October 2006
-- KISA specific OIDs
id-npki OBJECT IDENTIFIER ::= {id-KISA 10}
id-attribute OBJECT IDENTIFIER ::= {id-npki 1}
id-kisa-identifyData OBJECT IDENTIFIER ::= {id-attribute 1}
id-VID OBJECT IDENTIFIER ::= {id-kisa-identifyData 10}
id-SII OBJECT IDENTIFIER ::= {id-VID 1}
For closed communities, the SIItype value may be assigned by the CA
itself, but it is still recommended that the OID be registered.
4.2. User Chosen Password
The user selects a password as one of the input values for computing
the SIM. The strength of the password is critical to protection of
the user's SII, in the following sense. If an attacker has a
candidate SII value, and wants to determine whether the SIM value in
a specific subject certificate, P is the only protection for the SIM.
The user should be encouraged to select passwords that will be
difficult to be guessed, and long enough to protect against brute
force attacks.
Implementations of this specification MUST permit a user to select
passwords of up to 28 characters. RAs SHOULD implement password
filter rules to prevent user selection of trivial passwords. See
[FIPS 112] and [FIPS 180-1] for security criteria for passwords and
an automated password generator algorithm that randomly creates
simple pronounceable syllables as passwords.
4.3. Random Number Generation
The RA generates a random number, R. A new R MUST be generated for
each SIM. The length of R MUST be the same as the length of the
output of the hash algorithm H. For example, if H is SHA-1, the
random number MUST be 160 bits.
A Random Number Generator (RNG) that meets the requirements defined
in [FIPS 140-2] and its use is strongly recommended.
4.4. Generation of SIM
The SIM in the subjectAltName extension within a certificate
identifies an entity, even if multiple subjectAltNames appear in a
certificate. RAs MUST calculate the SIM value with the designated
inputs according to the following algorithm:
SIM = R || PEPSI
where PEPSI = H(H(P || R || SIItype || SII))
Park, et al. Standards Track [Page 9]
RFC 4683 Subject Identification Method October 2006
The SII is made known to an RA at user enrollment. Both SHA-1 and
SHA-256 MUST be supported for generation and verification of PEPSI
values. This specification does not preclude use of other one-way
hash functions, but SHA-1 or SHA-256 SHOULD be used wherever
interoperability is a concern.
Note that a secure communication channel MUST be used to pass P and
SII passing from the end entity to the RA, to protect them from
disclosure or modification.
The syntax and the associated OID for SIM are also provided in the
ASN.1 modules in Section 5.1. Also, Section 5.2 describes the syntax
for PEPSI in the ASN.1 modules.
4.5. Encryption of PEPSI
It may be required that the CA (not just the RA) verifies SII before
issuing a certificate. To meet this requirement, RA SHOULD encrypt
the SIItype, SII, and SIM and send the result to the CA by a secure
channel. The user SHOULD also encrypt the same values and send the
result to the CA in his or her certificate request message. Then the
CA compares these two results for verifying the user's SII.
Where the results from RA and the user are the EPEPSI.
EPEPSI = E(SIItype || SII || SIM)
When the EPEPSI is used in a user certificate request, it is in
regInfo of [RFC4211] and [RFC2986].
Note: Specific encryption/decryption methods are not defined in this
document. For transmission of the PEPSI value from a user to a
CA, the certificate request protocol employed defines how
encryption is performed. For transmission of this data between
an RA and a CA, the details of how encryption is performed is a
local matter.
The syntax and the associated OID for EPEPSI is provided in the ASN.1
modules in Section 5.3.
4.6. Certification Request
As described above, a certificate request message MAY contain the
SIM. [RFC2986] and [RFC4211] are widely used message syntaxes for
certificate requests.
Basically, a PKCS#10 message consists of a distinguished name, a
public key, and an optional set of attributes, collectively signed by
Park, et al. Standards Track [Page 10]
RFC 4683 Subject Identification Method October 2006
the end entity. The SIM alternative name MUST be placed in the
subjectAltName extension if this certificate request format is used.
If a CA verifies SII before issuing the certificate, the value of SIM
in the certification request MUST be conveyed in the EPEPSI form and
provided by the subject.
4.7. Certification
A CA that issues certificates containing the SIM includes the SIM as
a form of otherName from the GeneralName structure in the
"subjectAltName" extension.
In an environment where a CA verifies SII before issuing the
certificate, a CA decrypts the EPEPSI values it receives from both
the user and the RA, and compares them. It then validates that the
SII value is correctly bound to the subject.
SIItype, SII, SIM = D(EPEPSI)
5. Definition
5.1. SIM Syntax
This section specifies the syntax for the SIM name form included in
the subjectAltName extension. The SIM is composed of the three
fields: the hash algorithm identifier, the authority-chosen random
value, and the value of the PEPSI itself.
id-pkix OBJECT IDENTIFIER ::=
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) }
id-on OBJECT IDENTIFIER ::= { id-pkix 8 }
id-on-SIM OBJECT IDENTIFIER ::= { id-on 6 }
SIM ::= SEQUENCE {
hashAlg AlgorithmIdentifier,
authorityRandom OCTET STRING, -- RA-chosen random number
-- used in computation of
-- pEPSI
pEPSI OCTET STRING -- hash of HashContent
-- with algorithm hashAlg
}
Park, et al. Standards Track [Page 11]
RFC 4683 Subject Identification Method October 2006
5.2. PEPSI
This section specifies the syntax for the PEPSI. The PEPSI is
generated by performing the same hash function twice. The PEPSI is
generated over the ASN.1 structure HashContent. HashContent has four
values: the user-selected password, the authority-chosen random
number, the identifier type, and the identifier itself.
HashContent ::= SEQUENCE {
userPassword UTF8String,
-- user-supplied password
authorityRandom OCTET STRING,
-- RA-chosen random number
identifierType OBJECT IDENTIFIER, -- SIItype
identifier UTF8String -- SII
}
Before calculating a PEPSI, conforming implementations MUST process
the userPassword with the six-step [LDAPBIS STRPREP] string
preparation algorithm, with the following changes:
* In step 2, Map, the mapping shall include processing of
characters commonly mapped to nothing, as specified in Appendix
B.1 of [RFC3454].
* Omit step 6, Insignificant Character Removal.
5.3. Encrypted PEPSI
This section describes the syntax for the Encrypted PEPSI. The
Encrypted PEPSI has three fields: identifierType, identifier, and
SIM.
EncryptedPEPSI ::= SEQUENCE {
identifierType OBJECT IDENTIFIER, -- SIItype
identifier UTF8String, -- SII
sIM SIM -- Value of the SIM
}
When it is used in a certificate request, the OID in 'regInfo' of
[RFC4211] and [RFC2986] is as follows:
id-regEPEPSI OBJECT IDENTIFIER ::= { id-pkip 3 }
Park, et al. Standards Track [Page 12]
RFC 4683 Subject Identification Method October 2006
6. Example Usage of SIM
Depending on different security environments, there are three
possible use cases with SIM.
1. When a relying party does not have any information about the
certificate user.
2. When a relying party already knows the SII of the
certificate user.
3. When the certificate user does not want to disclose his SII.
For the use case 1, the SII and a user-chosen password P (which only
the user knows) must be sent to a relying party via a secure
communication channel; the certificate including the SIM also must be
transmitted. The relying party acquires R from the certificate. The
relying party can verify that the SII was validated by the CA (or RA)
and is associated with the entity that presented the password and
certificate. In this case, the RP learns which SII is bound to the
subject as a result of the procedure.
In case 2, a certificate user transmits only the password, P, and the
certificate. The rest of the detailed procedure is the same as case
1, but here the relying party supplies the SII value, based on its
external knowledge of that value. The purpose in this case is to
enable the RP to verify that the subject is bound to the SII,
presumably because the RP identifies the subject based on this SII.
In the last case, the certificate user does not want to disclose his
or her SII because of privacy concerns. Here the only information
sent by a certificate subject is the intermediate value of the PEPSI,
H(R || P || SIItype || SII). This value MUST be transmitted via a
secure channel, to preserve its confidentiality. Upon receiving this
value, the relying party applies the hash function to the
intermediate PEPSI value sent by the user, and matches it against the
SIM value in the user's certificate. The relying party does not
learn the user's SII value as a result of this processing, but the
relying party can verify the fact that the user knows the right SII
and password. This gives the relying party more confidence that the
user is the certificate subject. Note that this form of user
identity verification is NOT to be used in lieu of standard
certificate validation procedures, but rather in addition to such
procedures.
7. Name Constraints
The SIM value is stored as an otherName of a subject alternative
name; however, there are no constraints that can be placed on this
form of the name.
Park, et al. Standards Track [Page 13]
RFC 4683 Subject Identification Method October 2006
8. Security Considerations
Confidentiality for a SIM value is created by the iterated hashing of
the R, P, and SII values. A SIM value depends on two properties of a
hash function: the fact that it cannot be inverted and the fact that
collisions (especially with formatted data) are rare. The current
attacks by [WANG] are not applicable to SIM values since the end
entity supplying the SII and SIItype values does not supply all of
the data being hashed; i.e., the RA provides the R value.
In addition, a fairly good password is needed to protect against
guessing attacks on SIMs. Due to the short length of many SIIs, it
is possible that an attacker may be able to guess it with partial
information about gender, age, and date of birth. SIItype values are
very limited. Therefore, it is important for users to select a
fairly good password to prevent an attacker from determining whether
a guessed SII is accurate.
This protocol assumes that Bob is a trustworthy relying party who
will not reuse the Alice's information. Otherwise, Bob could
"impersonate" Alice if only knowledge of P and SII were used to
verify a subject's claimed identity. Thus, this protocol MUST be
used only with the protocols that make use of digital signatures
generated using the subject's private key.
Digital signatures are used by a message sender to demonstrate
knowledge of the private key corresponding to the public key in a
certificate, and thus to authenticate and bind his or her identity to
a signed message. However, managing a private key is vulnerable
under certain circumstances. It is not fully guaranteed that the
claimed private key is bound to the subject of a certificate. So,
the SIM can enhance verification of user identity.
Whenever a certificate needs to be updated, a new R SHOULD be
generated and the SIM SHOULD be recomputed. Repeating the value of
the SIM from a previous certificate permits an attacker to identify
certificates associated with the same individual, which may be
undesirable for personal privacy purposes.
Park, et al. Standards Track [Page 14]
RFC 4683 Subject Identification Method October 2006
9. Acknowledgements
Jim Schaad (Soaring Hawk Consulting), Seungjoo Kim, Jaeho Yoon,
Baehyo Park (KISA), Bill Burr, Morrie Dworkin (NIST), and the
Internet Security Technology Forum (ISTF) have significantly
contributed to work on the SIM and PEPSI concept and identified a
potential security attack. Also their comments on the set of
desirable properties for the PEPSI and enhancements to the PEPSI were
most illumination. Also, thanks to Russell Housley, Stephen Kent,
and Denis Pinkas for their contributions to this document.
10. IANA Considerations
In the future, IANA may be asked to establish a registry of object
identifiers to promote interoperability in the specification of SII
types.
11. References
11.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2986] Nystrom, M. and B. Kaliski, "PKCS #10:
Certification Request Syntax Specification Version
1.7", RFC 2986, November 2000.
[RFC3454] Hoffman, P. and M. Blanchet, "Preparation of
Internationalized Strings ("stringprep")", RFC
3454, December 2002.
[RFC4043] Pinkas, D. and T. Gindin, "Internet X.509 Public
Key Infrastructure Permanent Identifier", RFC 4043,
May 2005.
[RFC4211] Schaad, J., "Internet X.509 Public Key
Infrastructure Certificate Request Message Format
(CRMF)", RFC 4211, September 2005.
11.2. Informative References
[LDAPBIS STRPREP] Zeilenga, K., "LDAP: Internationalized String
Preparation", Work in Progress.
[FIPS 112] Fedreal Information Processing Standards
Publication (FIPS PUB) 112, "Password Usage", 30
May 1985.
Park, et al. Standards Track [Page 15]
RFC 4683 Subject Identification Method October 2006
[FIPS 180-1] Federal Information Processing Standards
Publication (FIPS PUB) 180-1, "Secure Hash
Standard", 17 April 1995.
[FIPS 140-2] Federal Information Processing Standards
Publication (FIPS PUB) 140-2, "Security
Requirements for Cryptographic Modules", 25 May
2001.
[WANG] Xiaoyun Wang, Yiqun Lisa Yin, and Hongbo Yu,
"Finding Collisions in the Full SHA-1", Crypto'05.
<http://www.infosec.sdu.edu.cn/paper/sha1-crypto-
auth-new-2-yao.pdf>
Authors' Addresses
Jongwook Park
Korea Information Security Agency
78, Garak-Dong, Songpa-Gu, Seoul, 138-803
REPUBLIC OF KOREA
Phone: 2-405-5432
EMail: khopri@kisa.or.kr
Jaeil Lee
78, Garak-Dong, Songpa-Gu, Seoul, 138-803
REPUBLIC OF KOREA
Korea Information Security Agency
Phone: 2-405-5300
EMail: jilee@kisa.or.kr
Hongsub Lee
Korea Information Security Agency
78, Garak-Dong, Songpa-Gu, Seoul, 138-803
REPUBLIC OF KOREA
Phone: 2-405-5100
EMail: hslee@kisa.or.kr
Park, et al. Standards Track [Page 16]
RFC 4683 Subject Identification Method October 2006
Sangjoon Park
BCQRE Co.,Ltd
Yuil Bldg. Dogok-dong 411-14, Kangnam-ku, Seoul, 135-270
REPUBLIC OF KOREA
EMail: sjpark@bcqre.com
Tim Polk
National Institute of Standards and Technology
100 Bureau Drive, MS 8930
Gaithersburg, MD 20899
EMail: tim.polk@nist.gov
Park, et al. Standards Track [Page 17]
RFC 4683 Subject Identification Method October 2006
Appendix A. "Compilable" ASN.1 Module, 1988 Syntax
PKIXSIM {iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-sim2005(38) }
DEFINITIONS EXPLICIT TAGS ::=
BEGIN
-- EXPORTS ALL
IMPORTS
AlgorithmIdentifier, AttributeTypeAndValue FROM PKIX1Explicit88
{iso(1) identified-organization(3) dod(6) internet(1) security(5)
mechanisms(5) pkix(7) id-mod(0) id-pkix1-explicit(18)}
-- SIM
-- SIM certificate OID
id-pkix OBJECT IDENTIFIER ::=
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) }
id-on OBJECT IDENTIFIER ::= { id-pkix 8 }
id-on-SIM OBJECT IDENTIFIER ::= { id-on 6 }
-- Certificate Syntax
SIM ::= SEQUENCE {
hashAlg AlgorithmIdentifier,
authorityRandom OCTET STRING, -- RA-chosen random number
-- used in computation of
-- pEPSI
pEPSI OCTET STRING -- hash of HashContent
-- with algorithm hashAlg
}
-- PEPSI
UTF8String ::= [UNIVERSAL 12] IMPLICIT OCTET STRING
-- The content of this type conforms to RFC 2279
HashContent ::= SEQUENCE {
userPassword UTF8String,
-- user-supplied password
authorityRandom OCTET STRING,
Park, et al. Standards Track [Page 18]
RFC 4683 Subject Identification Method October 2006
-- RA-chosen random number
identifierType OBJECT IDENTIFIER, -- SIItype
identifier UTF8String -- SII
}
-- Encrypted PEPSI
-- OID for encapsulated content type
id-regEPEPSI OBJECT IDENTIFIER ::= { id-pkip 3 }
EncryptedPEPSI ::= SEQUENCE {
identifierType OBJECT IDENTIFIER, -- SIItype
identifier UTF8String, -- SII
sIM SIM -- Value of the SIM
}
END
Park, et al. Standards Track [Page 19]
RFC 4683 Subject Identification Method October 2006
Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgement
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
Park, et al. Standards Track [Page 20]