[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

Obsoleted by: 4750 DRAFT STANDARD
Network Working Group                                           F. Baker
Request For Comments: 1850                                 Cisco Systems
Obsoletes: 1253                                                R. Coltun
Category: Standards Track                   RainbowBridge Communications
                                                           November 1995


               OSPF Version 2 Management Information Base

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in TCP/IP-based internets.
   In particular, it defines objects for managing the Open Shortest Path
   First Routing Protocol.




Table of Contents

   1. The SNMPv2 Network Management Framework ..............    2
   1.1 Object Definitions ..................................    3
   2. Overview .............................................    3
   2.1 Changes from RFC 1253 ...............................    3
   2.2 Textual Conventions .................................    6
   2.3 Structure of MIB ....................................    6
   2.3.1 General Variables .................................    6
   2.3.2 Area Data Structure and Area Stub Metric Table ....    7
   2.3.3 Link State Database and External Link State
         Database ..........................................    7
   2.3.4 Address Table and Host Tables .....................    7
   2.3.5 Interface and Interface Metric Tables .............    7
   2.3.6 Virtual Interface Table ...........................    7
   2.3.7 Neighbor and Virtual Neighbor Tables ..............    7
   2.4 Conceptual Row Creation .............................    7
   2.5 Default Configuration ...............................    8
   3. Definitions ..........................................   10
   3.1 OSPF General Variables ..............................   13
   3.2 OSPF Area Table .....................................   17



Baker & Coltun              Standards Track                     [Page 1]


RFC 1850                        OSPF MIB                   November 1995


   3.3 OSPF Area Default Metrics ...........................   21
   3.4 OSPF Link State Database ............................   25
   3.5 OSPF Address Range Table ............................   27
   3.6 OSPF Host Table .....................................   29
   3.7 OSPF Interface Table ................................   32
   3.8 OSPF Interface Metrics ..............................   39
   3.9 OSPF Virtual Interface Table ........................   42
   3.10 OSPF Neighbor Table ................................   46
   3.11 OSPF Virtual Neighbor Table ........................   51
   3.12 OSPF External Link State Database ..................   54
   3.13 OSPF Route Table Use ...............................   57
   3.14 OSPF Area Aggregate Table ..........................   58
   4. OSPF Traps ...........................................   66
   4.1 Format Of Trap Definitions ..........................   67
   4.2 Approach ............................................   67
   4.3 Ignoring Initial Activity ...........................   67
   4.4 Throttling Traps ....................................   67
   4.5 One Trap Per OSPF Event .............................   68
   4.6 Polling Event Counters ..............................   68
   5. OSPF Trap Definitions ................................   69
   5.1 Trap Support Objects ................................   69
   5.2 Traps ...............................................   71
   6. Acknowledgements ......................................  78
   7. References ............................................  78
   8. Security Considerations ...............................  80
   9. Authors' Addresses ....................................  80

1.  The SNMPv2 Network Management Framework

   The SNMPv2 Network Management Framework consists of four major
   components.  They are:

      o RFC 1441 which defines the SMI, the mechanisms used for
        describing and naming objects for the purpose of
        management.

      o STD 17, RFC 1213 defines MIB-II, the core set of managed objects
        for the Internet suite of protocols.

      o RFC 1445 which defines the administrative and other
        architectural aspects of the framework.

      o RFC 1448 which defines the protocol used for network
        access to managed objects.

   The Framework permits new objects to be defined for the purpose of
   experimentation and evaluation.




Baker & Coltun              Standards Track                     [Page 2]


RFC 1850                        OSPF MIB                   November 1995


1.1.  Object Definitions

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  Objects in the MIB are
   defined using the subset of Abstract Syntax Notation One (ASN.1)
   defined in the SMI.  In particular, each object object type is named
   by an OBJECT IDENTIFIER, an administratively assigned name.  The
   object type together with an object instance serves to uniquely
   identify a specific instantiation of the object.  For human
   convenience, we often use a textual string, termed the descriptor, to
   refer to the object type.

2.  Overview

2.1.  Changes from RFC 1253

   The changes from RFC 1253 are the following:

   (1)  The textual convention PositiveInteger was changed from
        1..'FFFFFFFF'h to 1..'7FFFFFFF'h at the request of
        Marshall Rose.

   (2)  The textual convention TOSType was changed to reflect the
        TOS values defined in the Router Requirements Draft, and
        in accordance with the IP Forwarding Table MIB's values.

   (3)  The names of some objects were changed, conforming to the
        convention that an acronym (for example, LSA) is a single
        word ("Lsa") in most SNMP names.

   (4)  textual changes were made to make the MIB readable by
        Dave Perkins' SMIC MIB Compiler in addition to Mosy.
        This involved changing the case of some characters in
        certain names and removing the DEFVAL clauses for
        Counters.

   (5)  The variables ospfAreaStatus and ospfIfStatus were added,
        having been overlooked in the original MIB.

   (6)  The range of the variable ospfLsdbType was extended to
        include multicastLink (Group-membership LSA) and
        nssaExternalLink (NSSA LSA).

   (7)  The variable ospfIfMetricMetric was renamed
        ospfIfMetricValue, and the following text was removed
        from its description:

        "The value FFFF is distinguished to mean 'no route via



Baker & Coltun              Standards Track                     [Page 3]


RFC 1850                        OSPF MIB                   November 1995


        this TOS'."

   (8)  The variable ospfNbmaNbrPermanence was added, with the
        values 'dynamic' and 'permanent'; by this means,
        dynamically learned and configured neighbors can be
        distinguished.

   (9)  The DESCRIPTION of the variable ospfNbrIpAddr was changed
        from

        "The IP address of this neighbor."

        to

        "The IP address this neighbor is using in its IP Source
        Address.  Note that, on addressless links, this will not
        be 0.0.0.0, but the address of another of the neighbor's
        interfaces."

        This is by way of clarification and does not change the
        specification.

   (10) The OSPF External Link State Database was added.  The
        OSPF Link State Database used to display all LSAs stored;
        in this MIB, it displays all but the AS External LSAs.
        This is because there are usually a large number of
        External LSAs, and they are relicated in all non-Stub
        Areas.

   (11) The variable ospfAreaSummary was added to control the
        import of summary LSAs into stub areas.  If it is
        noAreaSummary (default) the router will neither originate
        nor propagate summary LSAs into the stub area.  It will
        rely entirely on its default route.  If it is
        sendAreaSummary, the router will both summarize and
        propagate summary LSAs.

   (12) The general variables ospfExtLsdbLimit and
        ExitOverflowInterval were introduced to help handle LSDB
        overflow.

   (13) The use of the IP Forwarding Table is defined.

   (14) The ospfAreaRangeTable was obsoleted and replaced with
        the ospfAreaAggregateTable to accommodate two additional
        indexes.  The ospfAreaAggregateEntry keys now include a
        LsdbType (which can be used to differentiate between the
        traditional type-3 Aggregates and NSSA Aggregates) and an



Baker & Coltun              Standards Track                     [Page 4]


RFC 1850                        OSPF MIB                   November 1995


        ospfAreaAggregateMask (which will more clearly express
        the range).

   (15) The variable ospfAreaAggregateEffect was added.  This
        permits the network manager to hide a subnet within an
        area.

   (16) Normally, the border router of a stub area advertises a
        default route as an OSPF network summary.  An NSSA border
        router will generate a type-7 LSA indicating a default
        route, and import it into the NSSA.  ospfStubMetricType
        (ospf internal, type 1 external, or type 2 external)
        indicates the type of the default metric advertised.

   (17) ospfMulticastExtensions is added to the OSPF General
        Group.  This indicates the router's ability to forward IP
        multicast (Class D) datagrams.

   (18) ospfIfMulticastForwarding is added to the Interface
        Group.  It indicates whether, and if so, how, multicasts
        should be forwarded on the interface.

   (19) The MIB is converted to SNMP Version 2.  Beyond simple
        text changes and the addition of the MODULE-IDENTITY and
        MODULE-COMPLIANCE macros, this involved trading the
        TruthValue Textual Convention for SNMP Version 2's, which
        has the same values, and trading the Validation Textual
        Convention for SNMP Version 2's RowStatus.

   (20) ospfAuthType (area authentication type) was changed to an
        interface authentication type to match the key.  It also
        has an additional value, to indicate the use of MD5 for
        authentication.

   (21) ospfIfIntfType has a new value, pointToMultipoint.

   (22) ospfIfDemand (read/write) is added, to permit control of
        Demand OSPF features.

   (23) ospfNbrHelloSuppressed and ospfVirtNbrHelloSuppressed
        were added, (read only). They indicate whether Hellos are
        being suppressed to the neighbor.

   (24) ospfDemandExtensions was added to indicate whether the
        Demand OSPF extensions have been implemented, and to
        disable them if appropriate.





Baker & Coltun              Standards Track                     [Page 5]


RFC 1850                        OSPF MIB                   November 1995


2.2.  Textual Conventions

   Several new data types are introduced as a textual convention in this
   MIB document.  These textual conventions enhance the readability of
   the specification and can ease comparison with other specifications
   if appropriate.  It should be noted that the introduction of the
   these textual conventions has no effect on either the syntax nor the
   semantics of any managed objects.  The use of these is merely an
   artifact of the explanatory method used.  Objects defined in terms of
   one of these methods are always encoded by means of the rules that
   define the primitive type.  Hence, no changes to the SMI or the SNMP
   are necessary to accommodate these textual conventions which are
   adopted merely for the convenience of readers and writers in pursuit
   of the elusive goal of clear, concise, and unambiguous MIB documents.

   The new data types are AreaID, RouterID, TOSType, Metric, BigMetric,
   Status, PositiveInteger, HelloRange, UpToMaxAge, InterfaceIndex, and
   DesignatedRouterPriority.

2.3.  Structure of MIB

   The MIB is composed of the following sections:

     General Variables
     Area Data Structure
     Area Stub Metric Table
     Link State Database
     Address Range Table
     Host Table
     Interface Table
     Interface Metric Table
     Virtual Interface Table
     Neighbor Table
     Virtual Neighbor Table
     External Link State Database
     Aggregate Range Table

   There exists a separate MIB for notifications ("traps"), which is
   entirely optional.

2.3.1.  General Variables

   The General Variables are about what they sound like; variables which
   are global to the OSPF Process.







Baker & Coltun              Standards Track                     [Page 6]


RFC 1850                        OSPF MIB                   November 1995


2.3.2.  Area Data Structure and Area Stub Metric Table

   The Area Data Structure describes the OSPF Areas that the router
   participates in.  The Area Stub Metric Table describes the metrics
   advertised into a stub area by the default router(s).

2.3.3.  Link State Database and External Link State Database

   The Link State Database is provided primarily to provide detailed
   information for network debugging.

2.3.4.  Address Table and Host Tables

   The Address Range Table and Host Table are provided to view
   configured Network Summary and Host Route information.

2.3.5.  Interface and Interface Metric Tables

   The Interface Table and the Interface Metric Table together describe
   the various IP interfaces to OSPF.  The metrics are placed in
   separate tables in order to simplify dealing with multiple types of
   service, and to provide flexibility in the event that the IP TOS
   definition is changed in the future.  A Default Value specification
   is supplied for the TOS 0 (default) metric.

2.3.6.  Virtual Interface Table

   Likewise, the Virtual Interface Table describe virtual links to the
   OSPF Process.

2.3.7.  Neighbor and Virtual Neighbor Tables

   The Neighbor Table and the Virtual Neighbor Table describe the
   neighbors to the OSPF Process.

2.4.  Conceptual Row Creation

   For the benefit of row-creation in "conceptual" (see [9]) tables,
   DEFVAL (Default Value) clauses are included in the definitions in
   section 3, suggesting values which an agent should use for instances
   of variables which need to be created due to a Set-Request, but which
   are not specified in the Set-Request.  DEFVAL clauses have not been
   specified for some objects which are read-only, implying that they
   are zeroed upon row creation.  These objects are of the SYNTAX
   Counter32 or Gauge32.

   For those objects not having a DEFVAL clause, both management
   stations and agents should heed the Robustness Principle of the



Baker & Coltun              Standards Track                     [Page 7]


RFC 1850                        OSPF MIB                   November 1995


   Internet (see RFC-791):

     "be liberal in what you accept, conservative in what you
     send"

   That is, management stations should include as many of these columnar
   objects as possible (e.g., all read-write objects) in a Set-Request
   when creating a conceptual row; agents should accept a Set-Request
   with as few of these as they need (e.g., the minimum contents of a
   row creating SET consists of those objects for which, as they cannot
   be intuited, no default is specified.).

   There are numerous read-write objects in this MIB, as it is designed
   for SNMP management of the protocol, not just SNMP monitoring of its
   state.  However, in the absence of a standard SNMP Security
   architecture, it is acceptable for implementations to implement these
   as read-only with an alternative interface for their modification.

2.5.  Default Configuration

   OSPF is a powerful routing protocol, equipped with features to handle
   virtually any configuration requirement that might reasonably be
   found within an Autonomous System.  With this power comes a fair
   degree of complexity, which the sheer number of objects in the MIB
   will attest to.  Care has therefore been taken, in constructing this
   MIB, to define default values for virtually every object, to minimize
   the amount of parameterization required in the typical case.  That
   default configuration is as follows:

   Given the following assumptions:

   -    IP has already been configured

   -    The ifTable has already been configured

   -    ifSpeed is estimated by the interface drivers

   -    The OSPF Process automatically discovers all IP
        Interfaces and creates corresponding OSPF Interfaces

   -    The TOS 0 metrics are autonomously derived from ifSpeed

   -    The OSPF Process automatically creates the Areas required
        for the Interfaces

   The simplest configuration of an OSPF process requires that:

   -    The OSPF Process be Enabled.



Baker & Coltun              Standards Track                     [Page 8]


RFC 1850                        OSPF MIB                   November 1995


   This can be accomplished with a single SET:

                  ospfAdminStat := enabled.

   The configured system will have the following attributes:

   -    The RouterID will be one of the IP addresses of the
        device

   -    The device will be neither an Area Border Router nor an
        Autonomous System Border Router.

   -    Every IP Interface, with or without an address, will be
        an OSPF Interface.

   -    The AreaID of each interface will be 0.0.0.0, the
        Backbone.

   -    Authentication will be disabled

   -    All Broadcast and Point to Point interfaces will be
        operational.  NBMA Interfaces require the configuration
        of at least one neighbor.

   -    Timers on all direct interfaces will be:

          Hello Interval:        10 seconds
          Dead Timeout:          40 Seconds
          Retransmission:         5 Seconds
          Transit Delay:          1 Second
          Poll Interval:        120 Seconds

   -    no direct links to hosts will be configured.

   -    no addresses will be summarized

   -    Metrics, being a measure of bit duration, are unambiguous
        and intelligent.

   -    No Virtual Links will be configured.











Baker & Coltun              Standards Track                     [Page 9]


RFC 1850                        OSPF MIB                   November 1995


3.  Definitions

OSPF-MIB DEFINITIONS ::= BEGIN

    IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32,
            Integer32, IpAddress
                FROM SNMPv2-SMI
            TEXTUAL-CONVENTION, TruthValue, RowStatus
                FROM SNMPv2-TC
            MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
            mib-2                                    FROM RFC1213-MIB;

--  This MIB module uses the extended OBJECT-TYPE macro as
--  defined in [9].

ospf MODULE-IDENTITY
        LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
        ORGANIZATION "IETF OSPF Working Group"
        CONTACT-INFO
       "       Fred Baker
       Postal: Cisco Systems
               519 Lado Drive
               Santa Barbara, California 93111
       Tel:    +1 805 681 0115
       E-Mail: fred@cisco.com

               Rob Coltun
       Postal: RainbowBridge Communications
       Tel:    (301) 340-9416
       E-Mail: rcoltun@rainbow-bridge.com"
    DESCRIPTION
       "The MIB module to describe the OSPF Version 2
       Protocol"
    ::= { mib-2 14 }

--  The Area ID, in OSPF, has the same format as an IP Address,
--  but has the function of defining a summarization point for
--  Link State Advertisements

AreaID ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "An OSPF Area Identifier."
    SYNTAX      IpAddress


--  The Router ID, in OSPF, has the same format as an IP Address,



Baker & Coltun              Standards Track                    [Page 10]


RFC 1850                        OSPF MIB                   November 1995


--  but identifies the router independent of its IP Address.

RouterID ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A OSPF Router Identifier."
    SYNTAX      IpAddress


--  The OSPF Metric is defined as an unsigned value in the range

Metric ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The OSPF Internal Metric."
    SYNTAX      Integer32 (0..'FFFF'h)

BigMetric ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The OSPF External Metric."
    SYNTAX      Integer32 (0..'FFFFFF'h)

--  Status Values

Status ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The status of an interface: 'enabled' indicates that
       it is willing to communicate with other OSPF Routers,
       while 'disabled' indicates that it is not."
    SYNTAX      INTEGER { enabled (1), disabled (2) }

--  Time Durations measured in seconds

PositiveInteger ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "A positive integer. Values in excess are precluded as
       unnecessary and prone to interoperability issues."
    SYNTAX      Integer32 (0..'7FFFFFFF'h)

HelloRange ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The range of intervals on which hello messages are
       exchanged."
    SYNTAX      Integer32 (1..'FFFF'h)



Baker & Coltun              Standards Track                    [Page 11]


RFC 1850                        OSPF MIB                   November 1995


UpToMaxAge ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The values that one might find or configure for
       variables bounded by the maximum age of an LSA."
    SYNTAX      Integer32 (0..3600)


--  The range of ifIndex

InterfaceIndex ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The range of ifIndex."
    SYNTAX      Integer32


--  Potential Priorities for the Designated Router Election

DesignatedRouterPriority ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "The values defined for the priority of a system for
       becoming the designated router."
    SYNTAX      Integer32 (0..'FF'h)

TOSType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
       "Type of Service is defined as a mapping to the IP Type of
       Service Flags as defined in the IP Forwarding Table MIB

       +-----+-----+-----+-----+-----+-----+-----+-----+
       |                 |                       |     |
       |   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
       |                 |                       |     |
       +-----+-----+-----+-----+-----+-----+-----+-----+

                IP TOS                IP TOS
           Field     Policy      Field     Policy

           Contents    Code      Contents    Code
           0 0 0 0  ==>   0      0 0 0 1  ==>   2
           0 0 1 0  ==>   4      0 0 1 1  ==>   6
           0 1 0 0  ==>   8      0 1 0 1  ==>  10
           0 1 1 0  ==>  12      0 1 1 1  ==>  14
           1 0 0 0  ==>  16      1 0 0 1  ==>  18
           1 0 1 0  ==>  20      1 0 1 1  ==>  22



Baker & Coltun              Standards Track                    [Page 12]


RFC 1850                        OSPF MIB                   November 1995


           1 1 0 0  ==>  24      1 1 0 1  ==>  26
           1 1 1 0  ==>  28      1 1 1 1  ==>  30

       The remaining values are left for future definition."
    SYNTAX      Integer32 (0..30)


--  OSPF General Variables

--      These parameters apply globally to the Router's
--      OSPF Process.

ospfGeneralGroup OBJECT IDENTIFIER ::= { ospf 1 }


    ospfRouterId OBJECT-TYPE
        SYNTAX   RouterID
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "A  32-bit  integer  uniquely  identifying  the
           router in the Autonomous System.

           By  convention,  to  ensure  uniqueness,   this
           should  default  to  the  value  of  one of the
           router's IP interface addresses."
       REFERENCE
          "OSPF Version 2, C.1 Global parameters"
      ::= { ospfGeneralGroup 1 }


    ospfAdminStat OBJECT-TYPE
        SYNTAX   Status
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "The  administrative  status  of  OSPF  in  the
           router.   The  value 'enabled' denotes that the
           OSPF Process is active on at least  one  inter-
           face;  'disabled'  disables  it  on  all inter-
           faces."
       ::= { ospfGeneralGroup 2 }

    ospfVersionNumber OBJECT-TYPE
        SYNTAX   INTEGER    { version2 (2) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION



Baker & Coltun              Standards Track                    [Page 13]


RFC 1850                        OSPF MIB                   November 1995


           "The current version number of the OSPF  proto-
           col is 2."
       REFERENCE
          "OSPF Version 2, Title"
      ::= { ospfGeneralGroup 3 }


    ospfAreaBdrRtrStatus OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "A flag to note whether this router is an  area
           border router."
       REFERENCE
          "OSPF Version 2, Section 3 Splitting the AS into
          Areas"
      ::= { ospfGeneralGroup 4 }


    ospfASBdrRtrStatus OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "A flag to note whether this router is  config-
           ured as an Autonomous System border router."
       REFERENCE
          "OSPF Version 2, Section 3.3  Classification  of
          routers"
      ::= { ospfGeneralGroup 5 }

    ospfExternLsaCount OBJECT-TYPE
        SYNTAX   Gauge32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of external (LS type 5)  link-state
           advertisements in the link-state database."
       REFERENCE
          "OSPF Version 2, Appendix A.4.5 AS external link
          advertisements"
      ::= { ospfGeneralGroup 6 }


    ospfExternLsaCksumSum OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only



Baker & Coltun              Standards Track                    [Page 14]


RFC 1850                        OSPF MIB                   November 1995


        STATUS   current
        DESCRIPTION
           "The 32-bit unsigned sum of the LS checksums of
           the  external  link-state  advertisements  con-
           tained in the link-state  database.   This  sum
           can  be  used  to determine if there has been a
           change in a router's link state  database,  and
           to  compare  the  link-state  database  of  two
           routers."
       ::= { ospfGeneralGroup 7 }


    ospfTOSSupport OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "The router's support for type-of-service rout-
           ing."
       REFERENCE
          "OSPF Version 2,  Appendix  F.1.2  Optional  TOS
          support"
      ::= { ospfGeneralGroup 8 }

    ospfOriginateNewLsas OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of  new  link-state  advertisements
           that  have been originated.  This number is in-
           cremented each time the router originates a new
           LSA."
       ::= { ospfGeneralGroup 9 }


    ospfRxNewLsas OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of  link-state  advertisements  re-
           ceived  determined  to  be  new instantiations.
           This number does not include  newer  instantia-
           tions  of self-originated link-state advertise-
           ments."
       ::= { ospfGeneralGroup 10 }




Baker & Coltun              Standards Track                    [Page 15]


RFC 1850                        OSPF MIB                   November 1995


    ospfExtLsdbLimit OBJECT-TYPE
        SYNTAX   Integer32 (-1..'7FFFFFFF'h)
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "The  maximum   number   of   non-default   AS-
           external-LSAs entries that can be stored in the
           link-state database.  If the value is -1,  then
           there is no limit.

           When the number of non-default AS-external-LSAs
           in   a  router's  link-state  database  reaches
           ospfExtLsdbLimit, the router  enters  Overflow-
           State.   The   router  never  holds  more  than
           ospfExtLsdbLimit  non-default  AS-external-LSAs
           in  its  database. OspfExtLsdbLimit MUST be set
           identically in all routers attached to the OSPF
           backbone  and/or  any regular OSPF area. (i.e.,
           OSPF stub areas and NSSAs are excluded)."
       DEFVAL { -1 }
       ::= { ospfGeneralGroup 11 }

    ospfMulticastExtensions OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "A Bit Mask indicating whether  the  router  is
           forwarding  IP  multicast  (Class  D) datagrams
           based on the algorithms defined in  the  Multi-
           cast Extensions to OSPF.

           Bit 0, if set, indicates that  the  router  can
           forward  IP multicast datagrams in the router's
           directly attached areas (called intra-area mul-
           ticast routing).

           Bit 1, if set, indicates that  the  router  can
           forward  IP  multicast  datagrams  between OSPF
           areas (called inter-area multicast routing).

           Bit 2, if set, indicates that  the  router  can
           forward  IP  multicast  datagrams between Auto-
           nomous Systems (called inter-AS multicast rout-
           ing).

           Only certain combinations of bit  settings  are
           allowed,  namely: 0 (no multicast forwarding is



Baker & Coltun              Standards Track                    [Page 16]


RFC 1850                        OSPF MIB                   November 1995


           enabled), 1 (intra-area multicasting  only),  3
           (intra-area  and  inter-area  multicasting),  5
           (intra-area and inter-AS  multicasting)  and  7
           (multicasting  everywhere). By default, no mul-
           ticast forwarding is enabled."
       DEFVAL { 0 }
       ::= { ospfGeneralGroup 12 }

    ospfExitOverflowInterval OBJECT-TYPE
        SYNTAX   PositiveInteger
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "The number of  seconds  that,  after  entering
           OverflowState,  a  router will attempt to leave
           OverflowState. This allows the router to  again
           originate  non-default  AS-external-LSAs.  When
           set to 0, the router will not  leave  Overflow-
           State until restarted."
       DEFVAL { 0 }
       ::= { ospfGeneralGroup 13 }


    ospfDemandExtensions OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "The router's support for demand routing."
       REFERENCE
          "OSPF Version 2, Appendix on Demand Routing"
      ::= { ospfGeneralGroup 14 }


--      The OSPF Area Data Structure contains information
--      regarding the various areas. The interfaces and
--      virtual links are configured as part of these areas.
--      Area 0.0.0.0, by definition, is the Backbone Area


    ospfAreaTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfAreaEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "Information describing the configured  parame-
           ters  and cumulative statistics of the router's
           attached areas."



Baker & Coltun              Standards Track                    [Page 17]


RFC 1850                        OSPF MIB                   November 1995


       REFERENCE
          "OSPF Version 2, Section 6  The Area Data Struc-
          ture"
      ::= { ospf 2 }


    ospfAreaEntry OBJECT-TYPE
        SYNTAX   OspfAreaEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "Information describing the configured  parame-
           ters  and  cumulative  statistics of one of the
           router's attached areas."
       INDEX { ospfAreaId }
       ::= { ospfAreaTable 1 }

OspfAreaEntry ::=
    SEQUENCE {
        ospfAreaId
            AreaID,
        ospfAuthType
            Integer32,
        ospfImportAsExtern
            INTEGER,
        ospfSpfRuns
            Counter32,
        ospfAreaBdrRtrCount
            Gauge32,
        ospfAsBdrRtrCount
            Gauge32,
        ospfAreaLsaCount
            Gauge32,
        ospfAreaLsaCksumSum
            Integer32,
        ospfAreaSummary
            INTEGER,
        ospfAreaStatus
            RowStatus
              }

    ospfAreaId OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "A 32-bit integer uniquely identifying an area.
           Area ID 0.0.0.0 is used for the OSPF backbone."



Baker & Coltun              Standards Track                    [Page 18]


RFC 1850                        OSPF MIB                   November 1995


       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaEntry 1 }


    ospfAuthType OBJECT-TYPE
        SYNTAX   Integer32
                    -- none (0),
                    -- simplePassword (1)
                    -- md5 (2)
                    -- reserved for specification by IANA (> 2)
        MAX-ACCESS   read-create
        STATUS   obsolete
        DESCRIPTION
           "The authentication type specified for an area.
           Additional authentication types may be assigned
           locally on a per Area basis."
       REFERENCE
          "OSPF Version 2, Appendix E Authentication"
      DEFVAL { 0 }        -- no authentication, by default
      ::= { ospfAreaEntry 2 }

    ospfImportAsExtern OBJECT-TYPE
        SYNTAX   INTEGER    {
                    importExternal (1),
                    importNoExternal (2),
                    importNssa (3)
                  }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The area's support for importing  AS  external
           link- state advertisements."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      DEFVAL { importExternal }
      ::= { ospfAreaEntry 3 }


    ospfSpfRuns OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of times that the intra-area  route
           table  has  been  calculated  using this area's
           link-state database.  This  is  typically  done
           using Dijkstra's algorithm."



Baker & Coltun              Standards Track                    [Page 19]


RFC 1850                        OSPF MIB                   November 1995


       ::= { ospfAreaEntry 4 }


    ospfAreaBdrRtrCount OBJECT-TYPE
        SYNTAX   Gauge32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The total number of area border routers reach-
           able within this area.  This is initially zero,
           and is calculated in each SPF Pass."
       ::= { ospfAreaEntry 5 }

    ospfAsBdrRtrCount OBJECT-TYPE
        SYNTAX   Gauge32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The total number of Autonomous  System  border
           routers  reachable  within  this area.  This is
           initially zero, and is calculated in  each  SPF
           Pass."
       ::= { ospfAreaEntry 6 }


    ospfAreaLsaCount OBJECT-TYPE
        SYNTAX   Gauge32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The total number of link-state  advertisements
           in  this  area's link-state database, excluding
           AS External LSA's."
       ::= { ospfAreaEntry 7 }


    ospfAreaLsaCksumSum OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The 32-bit unsigned sum of the link-state  ad-
           vertisements'  LS  checksums  contained in this
           area's link-state database.  This sum  excludes
           external (LS type 5) link-state advertisements.
           The sum can be used to determine if  there  has
           been  a  change  in a router's link state data-
           base, and to compare the link-state database of



Baker & Coltun              Standards Track                    [Page 20]


RFC 1850                        OSPF MIB                   November 1995


           two routers."
       DEFVAL   { 0 }
       ::= { ospfAreaEntry 8 }

    ospfAreaSummary OBJECT-TYPE
        SYNTAX   INTEGER    {
                    noAreaSummary (1),
                    sendAreaSummary (2)
                  }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The variable ospfAreaSummary controls the  im-
           port  of  summary LSAs into stub areas.  It has
           no effect on other areas.

           If it is noAreaSummary, the router will neither
           originate  nor  propagate summary LSAs into the
           stub area.  It will rely entirely  on  its  de-
           fault route.

           If it is sendAreaSummary, the router will  both
           summarize and propagate summary LSAs."
       DEFVAL   { noAreaSummary }
       ::= { ospfAreaEntry 9 }


    ospfAreaStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfAreaEntry 10 }


--  OSPF Area Default Metric Table

--      The OSPF Area Default Metric Table describes the metrics
--      that a default Area Border Router will advertise into a
--      Stub area.


    ospfStubAreaTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfStubAreaEntry



Baker & Coltun              Standards Track                    [Page 21]


RFC 1850                        OSPF MIB                   November 1995


        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The set of metrics that will be advertised  by
           a default Area Border Router into a stub area."
       REFERENCE
          "OSPF Version 2, Appendix C.2, Area Parameters"
      ::= { ospf 3 }


    ospfStubAreaEntry OBJECT-TYPE
        SYNTAX   OspfStubAreaEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The metric for a given Type  of  Service  that
           will  be  advertised  by  a default Area Border
           Router into a stub area."
       REFERENCE
          "OSPF Version 2, Appendix C.2, Area Parameters"
      INDEX { ospfStubAreaId, ospfStubTOS }
      ::= { ospfStubAreaTable 1 }

OspfStubAreaEntry ::=
    SEQUENCE {
        ospfStubAreaId
            AreaID,
        ospfStubTOS
            TOSType,
        ospfStubMetric
            BigMetric,
        ospfStubStatus
            RowStatus,
        ospfStubMetricType
            INTEGER
              }

    ospfStubAreaId OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The 32 bit identifier for the Stub  Area.   On
           creation,  this  can  be  derived  from the in-
           stance."
       ::= { ospfStubAreaEntry 1 }





Baker & Coltun              Standards Track                    [Page 22]


RFC 1850                        OSPF MIB                   November 1995


    ospfStubTOS OBJECT-TYPE
        SYNTAX   TOSType
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The  Type  of  Service  associated  with   the
           metric.   On creation, this can be derived from
           the instance."
       ::= { ospfStubAreaEntry 2 }


    ospfStubMetric OBJECT-TYPE
        SYNTAX   BigMetric
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The metric value applied at the indicated type
           of  service.  By default, this equals the least
           metric at the type of service among the  inter-
           faces to other areas."
       ::= { ospfStubAreaEntry 3 }


    ospfStubStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfStubAreaEntry 4 }

    ospfStubMetricType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    ospfMetric (1),                -- OSPF Metric
                    comparableCost (2),        -- external type 1
                    nonComparable  (3)        -- external type 2
                  }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the type of metric  ad-
           vertised as a default route."
       DEFVAL   { ospfMetric }
       ::= { ospfStubAreaEntry 5 }




Baker & Coltun              Standards Track                    [Page 23]


RFC 1850                        OSPF MIB                   November 1995


--  OSPF Link State Database

--      The Link State Database contains the Link State
--      Advertisements from throughout the areas that the
--      device is attached to.


    ospfLsdbTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfLsdbEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The OSPF Process's Link State Database."
       REFERENCE
          "OSPF Version 2, Section 12  Link  State  Adver-
          tisements"
      ::= { ospf 4 }


    ospfLsdbEntry OBJECT-TYPE
        SYNTAX   OspfLsdbEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A single Link State Advertisement."
       INDEX { ospfLsdbAreaId, ospfLsdbType,
               ospfLsdbLsid, ospfLsdbRouterId }
       ::= { ospfLsdbTable 1 }

OspfLsdbEntry ::=
    SEQUENCE {
        ospfLsdbAreaId
            AreaID,
        ospfLsdbType
            INTEGER,
        ospfLsdbLsid
            IpAddress,
        ospfLsdbRouterId
            RouterID,
        ospfLsdbSequence
            Integer32,
        ospfLsdbAge
            Integer32,
        ospfLsdbChecksum
            Integer32,
        ospfLsdbAdvertisement
            OCTET STRING
              }



Baker & Coltun              Standards Track                    [Page 24]


RFC 1850                        OSPF MIB                   November 1995


    ospfLsdbAreaId OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The 32 bit identifier of the Area  from  which
           the LSA was received."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfLsdbEntry 1 }

-- External Link State Advertisements are permitted
-- for backward compatibility, but should be displayed in
-- the ospfExtLsdbTable rather than here.

    ospfLsdbType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    routerLink (1),
                    networkLink (2),
                    summaryLink (3),
                    asSummaryLink (4),
                    asExternalLink (5), -- but see ospfExtLsdbTable
                    multicastLink (6),
                    nssaExternalLink (7)
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The type  of  the  link  state  advertisement.
           Each  link state type has a separate advertise-
           ment format."
       REFERENCE
          "OSPF Version 2, Appendix A.4.1 The  Link  State
          Advertisement header"
      ::= { ospfLsdbEntry 2 }

    ospfLsdbLsid OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Link State ID is an LS Type Specific field
           containing either a Router ID or an IP Address;
           it identifies the piece of the  routing  domain
           that is being described by the advertisement."
       REFERENCE
          "OSPF Version 2, Section 12.1.4 Link State ID"
      ::= { ospfLsdbEntry 3 }



Baker & Coltun              Standards Track                    [Page 25]


RFC 1850                        OSPF MIB                   November 1995


    ospfLsdbRouterId OBJECT-TYPE
        SYNTAX   RouterID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The 32 bit number that uniquely identifies the
           originating router in the Autonomous System."
       REFERENCE
          "OSPF Version 2, Appendix C.1 Global parameters"
      ::= { ospfLsdbEntry 4 }

--  Note that the OSPF Sequence Number is a 32 bit signed
--  integer.  It starts with the value '80000001'h,
--  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
--  Thus, a typical sequence number will be very negative.

    ospfLsdbSequence OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The sequence number field is a  signed  32-bit
           integer.   It  is used to detect old and dupli-
           cate link state advertisements.  The  space  of
           sequence  numbers  is  linearly  ordered.   The
           larger the sequence number the more recent  the
           advertisement."
       REFERENCE
          "OSPF Version  2,  Section  12.1.6  LS  sequence
          number"
      ::= { ospfLsdbEntry 5 }


    ospfLsdbAge OBJECT-TYPE
        SYNTAX   Integer32    -- Should be 0..MaxAge
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "This field is the age of the link state adver-
           tisement in seconds."
       REFERENCE
          "OSPF Version 2, Section 12.1.1 LS age"
      ::= { ospfLsdbEntry 6 }

    ospfLsdbChecksum OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current



Baker & Coltun              Standards Track                    [Page 26]


RFC 1850                        OSPF MIB                   November 1995


        DESCRIPTION
           "This field is the  checksum  of  the  complete
           contents  of  the  advertisement, excepting the
           age field.  The age field is excepted  so  that
           an   advertisement's  age  can  be  incremented
           without updating the  checksum.   The  checksum
           used  is  the same that is used for ISO connec-
           tionless datagrams; it is commonly referred  to
           as the Fletcher checksum."
       REFERENCE
          "OSPF Version 2, Section 12.1.7 LS checksum"
      ::= { ospfLsdbEntry 7 }


    ospfLsdbAdvertisement OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE (1..65535))
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The entire Link State Advertisement, including
           its header."
       REFERENCE
          "OSPF Version 2, Section 12  Link  State  Adver-
          tisements"
      ::= { ospfLsdbEntry 8 }


--  Address Range Table

--      The Address Range Table acts as an adjunct to the Area
--      Table; It describes those Address Range Summaries that
--      are configured to be propagated from an Area to reduce
--      the amount of information about it which is known beyond
--      its borders.

    ospfAreaRangeTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfAreaRangeEntry
        MAX-ACCESS   not-accessible
        STATUS   obsolete
        DESCRIPTION
           "A range if IP addresses  specified  by  an  IP
           address/IP  network  mask  pair.   For example,
           class B address range of X.X.X.X with a network
           mask  of  255.255.0.0 includes all IP addresses
           from X.X.0.0 to X.X.255.255"
       REFERENCE
          "OSPF Version 2, Appendix C.2  Area parameters"
      ::= { ospf 5 }



Baker & Coltun              Standards Track                    [Page 27]


RFC 1850                        OSPF MIB                   November 1995


    ospfAreaRangeEntry OBJECT-TYPE
        SYNTAX   OspfAreaRangeEntry
        MAX-ACCESS   not-accessible
        STATUS   obsolete
        DESCRIPTION
           "A range if IP addresses  specified  by  an  IP
           address/IP  network  mask  pair.   For example,
           class B address range of X.X.X.X with a network
           mask  of  255.255.0.0 includes all IP addresses
           from X.X.0.0 to X.X.255.255"
       REFERENCE
          "OSPF Version 2, Appendix C.2  Area parameters"
      INDEX { ospfAreaRangeAreaId, ospfAreaRangeNet }
      ::= { ospfAreaRangeTable 1 }

OspfAreaRangeEntry ::=
    SEQUENCE {
        ospfAreaRangeAreaId
            AreaID,
        ospfAreaRangeNet
            IpAddress,
        ospfAreaRangeMask
            IpAddress,
        ospfAreaRangeStatus
            RowStatus,
        ospfAreaRangeEffect
            INTEGER
              }

    ospfAreaRangeAreaId OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   obsolete
        DESCRIPTION
           "The Area the Address  Range  is  to  be  found
           within."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaRangeEntry 1 }


    ospfAreaRangeNet OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   obsolete
        DESCRIPTION
           "The IP Address of the Net or Subnet  indicated
           by the range."



Baker & Coltun              Standards Track                    [Page 28]


RFC 1850                        OSPF MIB                   November 1995


       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaRangeEntry 2 }


    ospfAreaRangeMask OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-create
        STATUS   obsolete
        DESCRIPTION
           "The Subnet Mask that pertains to  the  Net  or
           Subnet."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaRangeEntry 3 }

    ospfAreaRangeStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   obsolete
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfAreaRangeEntry 4 }


    ospfAreaRangeEffect OBJECT-TYPE
        SYNTAX   INTEGER    {
                    advertiseMatching (1),
                    doNotAdvertiseMatching (2)
                  }
        MAX-ACCESS   read-create
        STATUS   obsolete
        DESCRIPTION
           "Subnets subsumed by ranges either trigger  the
           advertisement  of the indicated summary (adver-
           tiseMatching), or result in  the  subnet's  not
           being advertised at all outside the area."
       DEFVAL   { advertiseMatching }
       ::= { ospfAreaRangeEntry 5 }



--  OSPF Host Table

--      The Host/Metric Table indicates what hosts are directly



Baker & Coltun              Standards Track                    [Page 29]


RFC 1850                        OSPF MIB                   November 1995


--      attached to the Router, and what metrics and types of
--      service should be advertised for them.

    ospfHostTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfHostEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The list of Hosts, and their metrics, that the
           router will advertise as host routes."
       REFERENCE
          "OSPF Version 2, Appendix C.6  Host route param-
          eters"
      ::= { ospf 6 }


    ospfHostEntry OBJECT-TYPE
        SYNTAX   OspfHostEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A metric to be advertised, for a given type of
           service, when a given host is reachable."
       INDEX { ospfHostIpAddress, ospfHostTOS }
       ::= { ospfHostTable 1 }

OspfHostEntry ::=
    SEQUENCE {
        ospfHostIpAddress
            IpAddress,
        ospfHostTOS
            TOSType,
        ospfHostMetric
            Metric,
        ospfHostStatus
            RowStatus,
        ospfHostAreaID
            AreaID
              }

    ospfHostIpAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP Address of the Host."
       REFERENCE
          "OSPF Version 2, Appendix C.6 Host route parame-



Baker & Coltun              Standards Track                    [Page 30]


RFC 1850                        OSPF MIB                   November 1995


          ters"
      ::= { ospfHostEntry 1 }


    ospfHostTOS OBJECT-TYPE
        SYNTAX   TOSType
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Type of Service of the route being config-
           ured."
       REFERENCE
          "OSPF Version 2, Appendix C.6 Host route parame-
          ters"
      ::= { ospfHostEntry 2 }


    ospfHostMetric OBJECT-TYPE
        SYNTAX   Metric
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The Metric to be advertised."
       REFERENCE
          "OSPF Version 2, Appendix C.6 Host route parame-
          ters"
      ::= { ospfHostEntry 3 }

    ospfHostStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfHostEntry 4 }


    ospfHostAreaID OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Area the Host Entry is to be found within.
           By  default, the area that a subsuming OSPF in-
           terface is in, or 0.0.0.0"



Baker & Coltun              Standards Track                    [Page 31]


RFC 1850                        OSPF MIB                   November 1995


       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfHostEntry 5 }


--  OSPF Interface Table

--      The OSPF Interface Table augments the ipAddrTable
--             with OSPF specific information.

    ospfIfTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfIfEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The OSPF Interface Table describes the  inter-
           faces from the viewpoint of OSPF."
       REFERENCE
          "OSPF Version 2, Appendix C.3  Router  interface
          parameters"
      ::= { ospf 7 }


    ospfIfEntry OBJECT-TYPE
        SYNTAX   OspfIfEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The OSPF Interface Entry describes one  inter-
           face from the viewpoint of OSPF."
       INDEX { ospfIfIpAddress, ospfAddressLessIf }
       ::= { ospfIfTable 1 }

OspfIfEntry ::=
    SEQUENCE {
        ospfIfIpAddress
            IpAddress,
        ospfAddressLessIf
            Integer32,
        ospfIfAreaId
            AreaID,
        ospfIfType
            INTEGER,
        ospfIfAdminStat
            Status,
        ospfIfRtrPriority
            DesignatedRouterPriority,
        ospfIfTransitDelay



Baker & Coltun              Standards Track                    [Page 32]


RFC 1850                        OSPF MIB                   November 1995


            UpToMaxAge,
        ospfIfRetransInterval
            UpToMaxAge,
        ospfIfHelloInterval
            HelloRange,
        ospfIfRtrDeadInterval
            PositiveInteger,
        ospfIfPollInterval
            PositiveInteger,
        ospfIfState
            INTEGER,
        ospfIfDesignatedRouter
            IpAddress,
        ospfIfBackupDesignatedRouter
            IpAddress,
        ospfIfEvents
            Counter32,
        ospfIfAuthType
            INTEGER,
        ospfIfAuthKey
            OCTET STRING,
        ospfIfStatus
            RowStatus,
        ospfIfMulticastForwarding
            INTEGER,
        ospfIfDemand
            TruthValue
              }

    ospfIfIpAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address of this OSPF interface."
       ::= { ospfIfEntry 1 }

    ospfAddressLessIf OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "For the purpose of easing  the  instancing  of
           addressed   and  addressless  interfaces;  This
           variable takes the value 0 on  interfaces  with
           IP  Addresses,  and  the corresponding value of
           ifIndex for interfaces having no IP Address."
       ::= { ospfIfEntry 2 }



Baker & Coltun              Standards Track                    [Page 33]


RFC 1850                        OSPF MIB                   November 1995


    ospfIfAreaId OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "A 32-bit integer uniquely identifying the area
           to  which  the  interface  connects.   Area  ID
           0.0.0.0 is used for the OSPF backbone."
       DEFVAL   { '00000000'H }    -- 0.0.0.0
       ::= { ospfIfEntry 3 }

    ospfIfType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    broadcast (1),
                    nbma (2),
                    pointToPoint (3),
                    pointToMultipoint (5)
                  }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The OSPF interface type.

           By way of a default, this field may be intuited
           from the corresponding value of ifType.  Broad-
           cast LANs, such as  Ethernet  and  IEEE  802.5,
           take  the  value  'broadcast', X.25 and similar
           technologies take the value 'nbma',  and  links
           that  are  definitively point to point take the
           value 'pointToPoint'."
       ::= { ospfIfEntry 4 }


    ospfIfAdminStat OBJECT-TYPE
        SYNTAX   Status
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The OSPF  interface's  administrative  status.
           The  value formed on the interface, and the in-
           terface will be advertised as an internal route
           to  some  area.   The  value 'disabled' denotes
           that the interface is external to OSPF."
       DEFVAL { enabled }
       ::= { ospfIfEntry 5 }

    ospfIfRtrPriority OBJECT-TYPE
        SYNTAX   DesignatedRouterPriority



Baker & Coltun              Standards Track                    [Page 34]


RFC 1850                        OSPF MIB                   November 1995


        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The  priority  of  this  interface.   Used  in
           multi-access  networks,  this  field is used in
           the designated router election algorithm.   The
           value 0 signifies that the router is not eligi-
           ble to become the  designated  router  on  this
           particular  network.   In the event of a tie in
           this value, routers will use their Router ID as
           a tie breaker."
       DEFVAL { 1 }
       ::= { ospfIfEntry 6 }


    ospfIfTransitDelay OBJECT-TYPE
        SYNTAX   UpToMaxAge
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The estimated number of seconds  it  takes  to
           transmit  a  link state update packet over this
           interface."
       DEFVAL { 1 }
       ::= { ospfIfEntry 7 }


    ospfIfRetransInterval OBJECT-TYPE
        SYNTAX   UpToMaxAge
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The number of seconds between  link-state  ad-
           vertisement  retransmissions,  for  adjacencies
           belonging to this  interface.   This  value  is
           also used when retransmitting database descrip-
           tion and link-state request packets."
       DEFVAL { 5 }
       ::= { ospfIfEntry 8 }


    ospfIfHelloInterval OBJECT-TYPE
        SYNTAX   HelloRange
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The length of time, in  seconds,  between  the
           Hello  packets that the router sends on the in-



Baker & Coltun              Standards Track                    [Page 35]


RFC 1850                        OSPF MIB                   November 1995


           terface.  This value must be the same  for  all
           routers attached to a common network."
       DEFVAL { 10 }
       ::= { ospfIfEntry 9 }


    ospfIfRtrDeadInterval OBJECT-TYPE
        SYNTAX   PositiveInteger
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The number of seconds that  a  router's  Hello
           packets  have  not been seen before it's neigh-
           bors declare the router down.  This  should  be
           some  multiple  of  the  Hello  interval.  This
           value must be the same for all routers attached
           to a common network."
       DEFVAL { 40 }
       ::= { ospfIfEntry 10 }


    ospfIfPollInterval OBJECT-TYPE
        SYNTAX   PositiveInteger
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The larger time interval, in seconds,  between
           the  Hello  packets  sent  to  an inactive non-
           broadcast multi- access neighbor."
       DEFVAL { 120 }
       ::= { ospfIfEntry 11 }


    ospfIfState OBJECT-TYPE
        SYNTAX   INTEGER    {
                    down (1),
                    loopback (2),
                    waiting (3),
                    pointToPoint (4),
                    designatedRouter (5),
                    backupDesignatedRouter (6),
                    otherDesignatedRouter (7)
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The OSPF Interface State."
       DEFVAL { down }



Baker & Coltun              Standards Track                    [Page 36]


RFC 1850                        OSPF MIB                   November 1995


       ::= { ospfIfEntry 12 }


    ospfIfDesignatedRouter OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP Address of the Designated Router."
       DEFVAL   { '00000000'H }    -- 0.0.0.0
       ::= { ospfIfEntry 13 }


    ospfIfBackupDesignatedRouter OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The  IP  Address  of  the  Backup   Designated
           Router."
       DEFVAL   { '00000000'H }    -- 0.0.0.0
       ::= { ospfIfEntry 14 }

    ospfIfEvents OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of times this  OSPF  interface  has
           changed its state, or an error has occurred."
       ::= { ospfIfEntry 15 }


    ospfIfAuthKey OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE (0..256))
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The Authentication Key.  If the Area's Author-
           ization  Type  is  simplePassword,  and the key
           length is shorter than 8 octets, the agent will
           left adjust and zero fill to 8 octets.

           Note that unauthenticated  interfaces  need  no
           authentication key, and simple password authen-
           tication cannot use a key of more  than  8  oc-
           tets.  Larger keys are useful only with authen-
           tication mechanisms not specified in this docu-



Baker & Coltun              Standards Track                    [Page 37]


RFC 1850                        OSPF MIB                   November 1995


           ment.

           When read, ospfIfAuthKey always returns an  Oc-
           tet String of length zero."
       REFERENCE
          "OSPF Version 2, Section 9  The  Interface  Data
          Structure"
      DEFVAL   { '0000000000000000'H }    -- 0.0.0.0.0.0.0.0
      ::= { ospfIfEntry 16 }

    ospfIfStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfIfEntry 17 }


    ospfIfMulticastForwarding OBJECT-TYPE
        SYNTAX   INTEGER    {
                            blocked (1),        -- no multicast forwarding
                            multicast (2),        -- using multicast address
                            unicast (3)        -- to each OSPF neighbor
                  }
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The way multicasts should  forwarded  on  this
           interface;  not  forwarded,  forwarded  as data
           link multicasts, or forwarded as data link uni-
           casts.   Data link multicasting is not meaning-
           ful on point to point and NBMA interfaces,  and
           setting ospfMulticastForwarding to 0 effective-
           ly disables all multicast forwarding."
       DEFVAL { blocked }
       ::= { ospfIfEntry 18 }


    ospfIfDemand OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "Indicates whether Demand OSPF procedures (hel-



Baker & Coltun              Standards Track                    [Page 38]


RFC 1850                        OSPF MIB                   November 1995


           lo supression to FULL neighbors and setting the
           DoNotAge flag on proogated LSAs) should be per-
           formed on this interface."
       DEFVAL { false }
       ::= { ospfIfEntry 19 }


    ospfIfAuthType OBJECT-TYPE
        SYNTAX   INTEGER (0..255)
                    -- none (0),
                    -- simplePassword (1)
                    -- md5 (2)
                    -- reserved for specification by IANA (> 2)
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The authentication type specified for  an  in-
           terface.   Additional  authentication types may
           be assigned locally."
       REFERENCE
          "OSPF Version 2, Appendix E Authentication"
      DEFVAL { 0 }        -- no authentication, by default
      ::= { ospfIfEntry 20 }


--  OSPF Interface Metric Table

--      The Metric Table describes the metrics to be advertised
--      for a specified interface at the various types of service.
--      As such, this table is an adjunct of the OSPF Interface
--      Table.

-- Types of service, as defined by RFC 791, have the ability
-- to request low delay, high bandwidth, or reliable linkage.

-- For the purposes of this specification, the measure of
-- bandwidth

--      Metric = 10^8 / ifSpeed

-- is the default value.  For multiple link interfaces, note
-- that ifSpeed is the sum of the individual link speeds.
-- This yields a number having the following typical values:

--      Network Type/bit rate   Metric

--      >= 100 MBPS                 1
--      Ethernet/802.3             10



Baker & Coltun              Standards Track                    [Page 39]


RFC 1850                        OSPF MIB                   November 1995


--      E1                         48
--      T1 (ESF)                   65
--       64 KBPS                 1562
--       56 KBPS                 1785
--       19.2 KBPS               5208
--        9.6 KBPS              10416

-- Routes that are not specified use the default (TOS 0) metric

    ospfIfMetricTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfIfMetricEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The TOS metrics for  a  non-virtual  interface
           identified by the interface index."
       REFERENCE
          "OSPF Version 2, Appendix C.3  Router  interface
          parameters"
      ::= { ospf 8 }

    ospfIfMetricEntry OBJECT-TYPE
        SYNTAX   OspfIfMetricEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A particular TOS metric for a non-virtual  in-
           terface identified by the interface index."
       REFERENCE
          "OSPF Version 2, Appendix C.3  Router  interface
          parameters"
      INDEX { ospfIfMetricIpAddress,
  ospfIfMetricAddressLessIf,
  ospfIfMetricTOS }
      ::= { ospfIfMetricTable 1 }

OspfIfMetricEntry ::=
    SEQUENCE {
        ospfIfMetricIpAddress
            IpAddress,
        ospfIfMetricAddressLessIf
            Integer32,
        ospfIfMetricTOS
            TOSType,
        ospfIfMetricValue
            Metric,
        ospfIfMetricStatus
            RowStatus



Baker & Coltun              Standards Track                    [Page 40]


RFC 1850                        OSPF MIB                   November 1995


              }

    ospfIfMetricIpAddress OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address of this OSPF interface.  On row
           creation,  this  can  be  derived  from the in-
           stance."
       ::= { ospfIfMetricEntry 1 }

    ospfIfMetricAddressLessIf OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "For the purpose of easing  the  instancing  of
           addressed   and  addressless  interfaces;  This
           variable takes the value 0 on  interfaces  with
           IP  Addresses, and the value of ifIndex for in-
           terfaces having no IP Address.   On  row  crea-
           tion, this can be derived from the instance."
       ::= { ospfIfMetricEntry 2 }


    ospfIfMetricTOS OBJECT-TYPE
        SYNTAX   TOSType
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The type of service metric  being  referenced.
           On  row  creation, this can be derived from the
           instance."
       ::= { ospfIfMetricEntry 3 }


    ospfIfMetricValue OBJECT-TYPE
        SYNTAX   Metric
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The metric of using this type  of  service  on
           this interface.  The default value of the TOS 0
           Metric is 10^8 / ifSpeed."
       ::= { ospfIfMetricEntry 4 }

    ospfIfMetricStatus OBJECT-TYPE



Baker & Coltun              Standards Track                    [Page 41]


RFC 1850                        OSPF MIB                   November 1995


        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfIfMetricEntry 5 }


--  OSPF Virtual Interface Table

--      The Virtual Interface Table describes the virtual
--      links that the OSPF Process is configured to
--      carry on.

    ospfVirtIfTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfVirtIfEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "Information about this router's virtual inter-
           faces."
       REFERENCE
          "OSPF Version  2,  Appendix  C.4   Virtual  link
          parameters"
      ::= { ospf 9 }


    ospfVirtIfEntry OBJECT-TYPE
        SYNTAX   OspfVirtIfEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "Information about a single Virtual Interface."
       INDEX { ospfVirtIfAreaId, ospfVirtIfNeighbor }
       ::= { ospfVirtIfTable 1 }

OspfVirtIfEntry ::=
    SEQUENCE {
        ospfVirtIfAreaId
            AreaID,
        ospfVirtIfNeighbor
            RouterID,
        ospfVirtIfTransitDelay
            UpToMaxAge,
        ospfVirtIfRetransInterval



Baker & Coltun              Standards Track                    [Page 42]


RFC 1850                        OSPF MIB                   November 1995


            UpToMaxAge,
        ospfVirtIfHelloInterval
            HelloRange,
        ospfVirtIfRtrDeadInterval
            PositiveInteger,
        ospfVirtIfState
            INTEGER,
        ospfVirtIfEvents
            Counter32,
        ospfVirtIfAuthType
            INTEGER,
        ospfVirtIfAuthKey
            OCTET STRING,
        ospfVirtIfStatus
            RowStatus
              }

    ospfVirtIfAreaId OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The  Transit  Area  that  the   Virtual   Link
           traverses.  By definition, this is not 0.0.0.0"
       ::= { ospfVirtIfEntry 1 }


    ospfVirtIfNeighbor OBJECT-TYPE
        SYNTAX   RouterID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Router ID of the Virtual Neighbor."
       ::= { ospfVirtIfEntry 2 }


    ospfVirtIfTransitDelay OBJECT-TYPE
        SYNTAX   UpToMaxAge
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The estimated number of seconds  it  takes  to
           transmit  a link- state update packet over this
           interface."
       DEFVAL { 1 }
       ::= { ospfVirtIfEntry 3 }





Baker & Coltun              Standards Track                    [Page 43]


RFC 1850                        OSPF MIB                   November 1995


    ospfVirtIfRetransInterval OBJECT-TYPE
        SYNTAX   UpToMaxAge
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The number of seconds between  link-state  ad-
           vertisement  retransmissions,  for  adjacencies
           belonging to this  interface.   This  value  is
           also used when retransmitting database descrip-
           tion  and  link-state  request  packets.   This
           value  should  be well over the expected round-
           trip time."
       DEFVAL { 5 }
       ::= { ospfVirtIfEntry 4 }


    ospfVirtIfHelloInterval OBJECT-TYPE
        SYNTAX   HelloRange
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The length of time, in  seconds,  between  the
           Hello  packets that the router sends on the in-
           terface.  This value must be the same  for  the
           virtual neighbor."
       DEFVAL { 10 }
       ::= { ospfVirtIfEntry 5 }


    ospfVirtIfRtrDeadInterval OBJECT-TYPE
        SYNTAX   PositiveInteger
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The number of seconds that  a  router's  Hello
           packets  have  not been seen before it's neigh-
           bors declare the router down.  This  should  be
           some  multiple  of  the  Hello  interval.  This
           value must be the same for the  virtual  neigh-
           bor."
       DEFVAL { 60 }
       ::= { ospfVirtIfEntry 6 }


    ospfVirtIfState OBJECT-TYPE
        SYNTAX   INTEGER    {
                    down (1),            -- these use the same encoding
                    pointToPoint (4)     -- as the ospfIfTable



Baker & Coltun              Standards Track                    [Page 44]


RFC 1850                        OSPF MIB                   November 1995


                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "OSPF virtual interface states."
       DEFVAL   { down }
       ::= { ospfVirtIfEntry 7 }


    ospfVirtIfEvents OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of state changes or error events on
           this Virtual Link"
       ::= { ospfVirtIfEntry 8 }


    ospfVirtIfAuthKey OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE(0..256))
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "If Authentication Type is simplePassword,  the
           device  will left adjust and zero fill to 8 oc-
           tets.

           Note that unauthenticated  interfaces  need  no
           authentication key, and simple password authen-
           tication cannot use a key of more  than  8  oc-
           tets.  Larger keys are useful only with authen-
           tication mechanisms not specified in this docu-
           ment.

           When  read,  ospfVifAuthKey  always  returns  a
           string of length zero."
       REFERENCE
          "OSPF Version 2, Section 9  The  Interface  Data
          Structure"
      DEFVAL   { '0000000000000000'H }    -- 0.0.0.0.0.0.0.0
      ::= { ospfVirtIfEntry 9 }


    ospfVirtIfStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current



Baker & Coltun              Standards Track                    [Page 45]


RFC 1850                        OSPF MIB                   November 1995


        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfVirtIfEntry 10 }


    ospfVirtIfAuthType OBJECT-TYPE
        SYNTAX   INTEGER (0..255)
                    -- none (0),
                    -- simplePassword (1)
                    -- md5 (2)
                    -- reserved for specification by IANA (> 2)
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The authentication type specified for a virtu-
           al  interface.  Additional authentication types
           may be assigned locally."
       REFERENCE
          "OSPF Version 2, Appendix E Authentication"
      DEFVAL { 0 }        -- no authentication, by default
      ::= { ospfVirtIfEntry 11 }


--  OSPF Neighbor Table

--      The OSPF Neighbor Table describes all neighbors in
--      the locality of the subject router.

    ospfNbrTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfNbrEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A table of non-virtual neighbor information."
       REFERENCE
          "OSPF Version 2, Section 10  The  Neighbor  Data
          Structure"
      ::= { ospf 10 }


    ospfNbrEntry OBJECT-TYPE
        SYNTAX   OspfNbrEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION



Baker & Coltun              Standards Track                    [Page 46]


RFC 1850                        OSPF MIB                   November 1995


           "The information regarding a single neighbor."
       REFERENCE
          "OSPF Version 2, Section 10  The  Neighbor  Data
          Structure"
      INDEX { ospfNbrIpAddr, ospfNbrAddressLessIndex }
      ::= { ospfNbrTable 1 }

OspfNbrEntry ::=
    SEQUENCE {
        ospfNbrIpAddr
            IpAddress,
        ospfNbrAddressLessIndex
            InterfaceIndex,
        ospfNbrRtrId
            RouterID,
        ospfNbrOptions
            Integer32,
        ospfNbrPriority
            DesignatedRouterPriority,
        ospfNbrState
            INTEGER,
        ospfNbrEvents
            Counter32,
        ospfNbrLsRetransQLen
            Gauge32,
        ospfNbmaNbrStatus
            RowStatus,
        ospfNbmaNbrPermanence
            INTEGER,
        ospfNbrHelloSuppressed
            TruthValue
              }

    ospfNbrIpAddr OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address this neighbor is using  in  its
           IP  Source  Address.  Note that, on addressless
           links, this will not be 0.0.0.0,  but  the  ad-
           dress of another of the neighbor's interfaces."
       ::= { ospfNbrEntry 1 }


    ospfNbrAddressLessIndex OBJECT-TYPE
        SYNTAX   InterfaceIndex
        MAX-ACCESS   read-only



Baker & Coltun              Standards Track                    [Page 47]


RFC 1850                        OSPF MIB                   November 1995


        STATUS   current
        DESCRIPTION
           "On an interface having an  IP  Address,  zero.
           On  addressless  interfaces,  the corresponding
           value of ifIndex in the Internet Standard  MIB.
           On  row  creation, this can be derived from the
           instance."
       ::= { ospfNbrEntry 2 }


    ospfNbrRtrId OBJECT-TYPE
        SYNTAX   RouterID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "A 32-bit integer (represented as a type  IpAd-
           dress)  uniquely  identifying  the  neighboring
           router in the Autonomous System."
       DEFVAL   { '00000000'H }    -- 0.0.0.0
       ::= { ospfNbrEntry 3 }


    ospfNbrOptions OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "A Bit Mask corresponding to the neighbor's op-
           tions field.

           Bit 0, if set, indicates that the  system  will
           operate  on  Type of Service metrics other than
           TOS 0.  If zero, the neighbor will  ignore  all
           metrics except the TOS 0 metric.

           Bit 1, if set, indicates  that  the  associated
           area  accepts and operates on external informa-
           tion; if zero, it is a stub area.

           Bit 2, if set, indicates that the system is ca-
           pable  of routing IP Multicast datagrams; i.e.,
           that it implements the Multicast Extensions  to
           OSPF.

           Bit 3, if set, indicates  that  the  associated
           area  is  an  NSSA.  These areas are capable of
           carrying type 7 external advertisements,  which
           are  translated into type 5 external advertise-



Baker & Coltun              Standards Track                    [Page 48]


RFC 1850                        OSPF MIB                   November 1995


           ments at NSSA borders."
       REFERENCE
          "OSPF Version 2, Section 12.1.2 Options"
      DEFVAL { 0 }
      ::= { ospfNbrEntry 4 }


    ospfNbrPriority OBJECT-TYPE
        SYNTAX   DesignatedRouterPriority
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "The priority of this neighbor in the designat-
           ed router election algorithm.  The value 0 sig-
           nifies that the neighbor is not eligible to be-
           come  the  designated router on this particular
           network."
       DEFVAL { 1 }
       ::= { ospfNbrEntry 5 }


    ospfNbrState OBJECT-TYPE
        SYNTAX   INTEGER    {
                    down (1),
                    attempt (2),
                    init (3),
                    twoWay (4),
                    exchangeStart (5),
                    exchange (6),
                    loading (7),
                    full (8)
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The State of the relationship with this Neigh-
           bor."
       REFERENCE
          "OSPF Version 2, Section 10.1 Neighbor States"
      DEFVAL   { down }
      ::= { ospfNbrEntry 6 }


    ospfNbrEvents OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION



Baker & Coltun              Standards Track                    [Page 49]


RFC 1850                        OSPF MIB                   November 1995


           "The number of times this neighbor relationship
           has changed state, or an error has occurred."
       ::= { ospfNbrEntry 7 }


    ospfNbrLsRetransQLen OBJECT-TYPE
        SYNTAX   Gauge32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The  current  length  of  the   retransmission
           queue."
       ::= { ospfNbrEntry 8 }


    ospfNbmaNbrStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfNbrEntry 9 }


    ospfNbmaNbrPermanence OBJECT-TYPE
        SYNTAX   INTEGER    {
                    dynamic (1),        -- learned through protocol
                    permanent (2)       -- configured address
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.   'dynamic'  and  'permanent' refer to how
           the neighbor became known."
       DEFVAL { permanent }
       ::= { ospfNbrEntry 10 }


    ospfNbrHelloSuppressed OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "Indicates whether Hellos are being  suppressed



Baker & Coltun              Standards Track                    [Page 50]


RFC 1850                        OSPF MIB                   November 1995


           to the neighbor"
       ::= { ospfNbrEntry 11 }


--  OSPF Virtual Neighbor Table

--      This table describes all virtual neighbors.
--      Since Virtual Links are configured in the
--      virtual interface table, this table is read-only.

    ospfVirtNbrTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfVirtNbrEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A table of virtual neighbor information."
       REFERENCE
          "OSPF Version 2, Section 15  Virtual Links"
      ::= { ospf 11 }


    ospfVirtNbrEntry OBJECT-TYPE
        SYNTAX   OspfVirtNbrEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "Virtual neighbor information."
       INDEX { ospfVirtNbrArea, ospfVirtNbrRtrId }
       ::= { ospfVirtNbrTable 1 }

OspfVirtNbrEntry ::=
    SEQUENCE {
        ospfVirtNbrArea
            AreaID,
        ospfVirtNbrRtrId
            RouterID,
        ospfVirtNbrIpAddr
            IpAddress,
        ospfVirtNbrOptions
            Integer32,
        ospfVirtNbrState
            INTEGER,
        ospfVirtNbrEvents
            Counter32,
        ospfVirtNbrLsRetransQLen
            Gauge32,
        ospfVirtNbrHelloSuppressed
                TruthValue



Baker & Coltun              Standards Track                    [Page 51]


RFC 1850                        OSPF MIB                   November 1995


              }

    ospfVirtNbrArea OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Transit Area Identifier."
       ::= { ospfVirtNbrEntry 1 }


    ospfVirtNbrRtrId OBJECT-TYPE
        SYNTAX   RouterID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "A  32-bit  integer  uniquely  identifying  the
           neighboring router in the Autonomous System."
       ::= { ospfVirtNbrEntry 2 }


    ospfVirtNbrIpAddr OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address this Virtual  Neighbor  is  us-
           ing."
       ::= { ospfVirtNbrEntry 3 }


    ospfVirtNbrOptions OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "A Bit Mask corresponding to the neighbor's op-
           tions field.

           Bit 1, if set, indicates that the  system  will
           operate  on  Type of Service metrics other than
           TOS 0.  If zero, the neighbor will  ignore  all
           metrics except the TOS 0 metric.

           Bit 2, if set, indicates  that  the  system  is
           Network  Multicast  capable; ie, that it imple-
           ments OSPF Multicast Routing."
       ::= { ospfVirtNbrEntry 4 }



Baker & Coltun              Standards Track                    [Page 52]


RFC 1850                        OSPF MIB                   November 1995


    ospfVirtNbrState OBJECT-TYPE
        SYNTAX   INTEGER    {
                    down (1),
                    attempt (2),
                    init (3),
                    twoWay (4),
                    exchangeStart (5),
                    exchange (6),
                    loading (7),
                    full (8)
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The state of the  Virtual  Neighbor  Relation-
           ship."
       ::= { ospfVirtNbrEntry 5 }


    ospfVirtNbrEvents OBJECT-TYPE
        SYNTAX   Counter32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The number of  times  this  virtual  link  has
           changed its state, or an error has occurred."
       ::= { ospfVirtNbrEntry 6 }


    ospfVirtNbrLsRetransQLen OBJECT-TYPE
        SYNTAX   Gauge32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The  current  length  of  the   retransmission
           queue."
       ::= { ospfVirtNbrEntry 7 }


    ospfVirtNbrHelloSuppressed OBJECT-TYPE
        SYNTAX   TruthValue
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "Indicates whether Hellos are being  suppressed
           to the neighbor"
       ::= { ospfVirtNbrEntry 8 }




Baker & Coltun              Standards Track                    [Page 53]


RFC 1850                        OSPF MIB                   November 1995


--  OSPF Link State Database, External

--      The Link State Database contains the Link State
--      Advertisements from throughout the areas that the
--      device is attached to.

--             This table is identical to the OSPF LSDB Table in
--      format, but contains only External Link State
--             Advertisements.  The purpose is to allow external
--      LSAs to be displayed once for the router rather
--      than once in each non-stub area.

    ospfExtLsdbTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfExtLsdbEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "The OSPF Process's Links State Database."
       REFERENCE
          "OSPF Version 2, Section 12  Link  State  Adver-
          tisements"
      ::= { ospf 12 }


    ospfExtLsdbEntry OBJECT-TYPE
        SYNTAX   OspfExtLsdbEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A single Link State Advertisement."
       INDEX { ospfExtLsdbType, ospfExtLsdbLsid, ospfExtLsdbRouterId }
       ::= { ospfExtLsdbTable 1 }

OspfExtLsdbEntry ::=
    SEQUENCE {
        ospfExtLsdbType
            INTEGER,
        ospfExtLsdbLsid
            IpAddress,
        ospfExtLsdbRouterId
            RouterID,
        ospfExtLsdbSequence
            Integer32,
        ospfExtLsdbAge
            Integer32,
        ospfExtLsdbChecksum
            Integer32,
        ospfExtLsdbAdvertisement



Baker & Coltun              Standards Track                    [Page 54]


RFC 1850                        OSPF MIB                   November 1995


            OCTET STRING
              }

    ospfExtLsdbType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    asExternalLink (5)
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The type  of  the  link  state  advertisement.
           Each  link state type has a separate advertise-
           ment format."
       REFERENCE
          "OSPF Version 2, Appendix A.4.1 The  Link  State
          Advertisement header"
      ::= { ospfExtLsdbEntry 1 }


    ospfExtLsdbLsid OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Link State ID is an LS Type Specific field
           containing either a Router ID or an IP Address;
           it identifies the piece of the  routing  domain
           that is being described by the advertisement."
       REFERENCE
          "OSPF Version 2, Section 12.1.4 Link State ID"
      ::= { ospfExtLsdbEntry 2 }


    ospfExtLsdbRouterId OBJECT-TYPE
        SYNTAX   RouterID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The 32 bit number that uniquely identifies the
           originating router in the Autonomous System."
       REFERENCE
          "OSPF Version 2, Appendix C.1 Global parameters"
      ::= { ospfExtLsdbEntry 3 }

--  Note that the OSPF Sequence Number is a 32 bit signed
--  integer.  It starts with the value '80000001'h,
--  or -'7FFFFFFF'h, and increments until '7FFFFFFF'h
--  Thus, a typical sequence number will be very negative.



Baker & Coltun              Standards Track                    [Page 55]


RFC 1850                        OSPF MIB                   November 1995


    ospfExtLsdbSequence OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The sequence number field is a  signed  32-bit
           integer.   It  is used to detect old and dupli-
           cate link state advertisements.  The  space  of
           sequence  numbers  is  linearly  ordered.   The
           larger the sequence number the more recent  the
           advertisement."
       REFERENCE
          "OSPF Version  2,  Section  12.1.6  LS  sequence
          number"
      ::= { ospfExtLsdbEntry 4 }


    ospfExtLsdbAge OBJECT-TYPE
        SYNTAX   Integer32    -- Should be 0..MaxAge
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "This field is the age of the link state adver-
           tisement in seconds."
       REFERENCE
          "OSPF Version 2, Section 12.1.1 LS age"
      ::= { ospfExtLsdbEntry 5 }


    ospfExtLsdbChecksum OBJECT-TYPE
        SYNTAX   Integer32
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "This field is the  checksum  of  the  complete
           contents  of  the  advertisement, excepting the
           age field.  The age field is excepted  so  that
           an   advertisement's  age  can  be  incremented
           without updating the  checksum.   The  checksum
           used  is  the same that is used for ISO connec-
           tionless datagrams; it is commonly referred  to
           as the Fletcher checksum."
       REFERENCE
          "OSPF Version 2, Section 12.1.7 LS checksum"
      ::= { ospfExtLsdbEntry 6 }


    ospfExtLsdbAdvertisement OBJECT-TYPE



Baker & Coltun              Standards Track                    [Page 56]


RFC 1850                        OSPF MIB                   November 1995


        SYNTAX   OCTET STRING (SIZE(36))
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The entire Link State Advertisement, including
           its header."
       REFERENCE
          "OSPF Version 2, Section 12  Link  State  Adver-
          tisements"
      ::= { ospfExtLsdbEntry 7 }


--  OSPF Use of the CIDR Route Table

ospfRouteGroup           OBJECT IDENTIFIER ::= { ospf 13 }

-- The IP Forwarding Table defines a number of objects for use by
-- the routing protocol to externalize its information.  Most of
-- the variables (ipForwardDest, ipForwardMask, ipForwardPolicy,
-- ipForwardNextHop, ipForwardIfIndex, ipForwardType,
-- ipForwardProto, ipForwardAge, and ipForwardNextHopAS) are
-- defined there.

-- Those that leave some discretion are defined here.

-- ipCidrRouteProto is, of course, ospf (13).

-- ipCidrRouteAge is the time since the route was first calculated,
-- as opposed to the time since the last SPF run.

-- ipCidrRouteInfo is an OBJECT IDENTIFIER for use by the routing
-- protocol.  The following values shall be found there depending
-- on the way the route was calculated.

ospfIntraArea      OBJECT IDENTIFIER ::= { ospfRouteGroup 1 }
ospfInterArea      OBJECT IDENTIFIER ::= { ospfRouteGroup 2 }
ospfExternalType1  OBJECT IDENTIFIER ::= { ospfRouteGroup 3 }
ospfExternalType2  OBJECT IDENTIFIER ::= { ospfRouteGroup 4 }

-- ipCidrRouteMetric1 is, by definition, the primary routing
-- metric.  Therefore, it should be the metric that route
-- selection is based on.  For intra-area and inter-area routes,
-- it is an OSPF metric.  For External Type 1 (comparable value)
-- routes, it is an OSPF metric plus the External Metric.  For
-- external Type 2 (non-comparable value) routes, it is the
-- external metric.

-- ipCidrRouteMetric2 is, by definition, a secondary routing



Baker & Coltun              Standards Track                    [Page 57]


RFC 1850                        OSPF MIB                   November 1995


-- metric.  Therefore, it should be the metric that breaks a tie
-- among routes having equal metric1 values and the same
-- calculation rule.  For intra-area, inter-area routes, and
-- External Type 1 (comparable value) routes, it is unused.  For
-- external Type 2 (non-comparable value) routes, it is the metric
-- to the AS border router.

-- ipCidrRouteMetric3, ipCidrRouteMetric4, and ipCidrRouteMetric5 are
-- unused.

--
--      The OSPF Area Aggregate Table
--
--      This table replaces the OSPF Area Summary Table, being an
--      extension of that for CIDR routers.

    ospfAreaAggregateTable OBJECT-TYPE
        SYNTAX   SEQUENCE OF OspfAreaAggregateEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A range of IP addresses  specified  by  an  IP
           address/IP  network  mask  pair.   For example,
           class B address range of X.X.X.X with a network
           mask  of  255.255.0.0 includes all IP addresses
           from X.X.0.0  to  X.X.255.255.   Note  that  if
           ranges  are configured such that one range sub-
           sumes  another  range  (e.g.,   10.0.0.0   mask
           255.0.0.0  and  10.1.0.0 mask 255.255.0.0), the
           most specific match is the preferred one."
       REFERENCE
          "OSPF Version 2, Appendix C.2  Area parameters"
      ::= { ospf 14 }


    ospfAreaAggregateEntry OBJECT-TYPE
        SYNTAX   OspfAreaAggregateEntry
        MAX-ACCESS   not-accessible
        STATUS   current
        DESCRIPTION
           "A range of IP addresses  specified  by  an  IP
           address/IP  network  mask  pair.   For example,
           class B address range of X.X.X.X with a network
           mask  of  255.255.0.0 includes all IP addresses
           from X.X.0.0  to  X.X.255.255.   Note  that  if
           ranges are range configured such that one range
           subsumes another  range  (e.g.,  10.0.0.0  mask
           255.0.0.0  and  10.1.0.0 mask 255.255.0.0), the



Baker & Coltun              Standards Track                    [Page 58]


RFC 1850                        OSPF MIB                   November 1995


           most specific match is the preferred one."
       REFERENCE
          "OSPF Version 2, Appendix C.2  Area parameters"
      INDEX { ospfAreaAggregateAreaID, ospfAreaAggregateLsdbType,
              ospfAreaAggregateNet, ospfAreaAggregateMask }
      ::= { ospfAreaAggregateTable 1 }


OspfAreaAggregateEntry ::=
    SEQUENCE {
        ospfAreaAggregateAreaID
            AreaID,
        ospfAreaAggregateLsdbType
            INTEGER,
        ospfAreaAggregateNet
            IpAddress,
        ospfAreaAggregateMask
            IpAddress,
        ospfAreaAggregateStatus
            RowStatus,
        ospfAreaAggregateEffect
            INTEGER
              }

    ospfAreaAggregateAreaID OBJECT-TYPE
        SYNTAX   AreaID
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Area the Address Aggregate is to be  found
           within."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaAggregateEntry 1 }


    ospfAreaAggregateLsdbType OBJECT-TYPE
        SYNTAX   INTEGER    {
                    summaryLink (3),
                    nssaExternalLink (7)
                  }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The type of the Address Aggregate.  This field
           specifies  the  Lsdb type that this Address Ag-
           gregate applies to."
       REFERENCE



Baker & Coltun              Standards Track                    [Page 59]


RFC 1850                        OSPF MIB                   November 1995


          "OSPF Version 2, Appendix A.4.1 The  Link  State
          Advertisement header"
      ::= { ospfAreaAggregateEntry 2 }


    ospfAreaAggregateNet OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP Address of the Net or Subnet  indicated
           by the range."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaAggregateEntry 3 }


    ospfAreaAggregateMask OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The Subnet Mask that pertains to  the  Net  or
           Subnet."
       REFERENCE
          "OSPF Version 2, Appendix C.2 Area parameters"
      ::= { ospfAreaAggregateEntry 4 }


    ospfAreaAggregateStatus OBJECT-TYPE
        SYNTAX   RowStatus
        MAX-ACCESS   read-create
        STATUS   current
        DESCRIPTION
           "This variable displays the status of  the  en-
           try.  Setting it to 'invalid' has the effect of
           rendering it inoperative.  The internal  effect
           (row removal) is implementation dependent."
       ::= { ospfAreaAggregateEntry 5 }


    ospfAreaAggregateEffect OBJECT-TYPE
        SYNTAX   INTEGER    {
                    advertiseMatching (1),
                    doNotAdvertiseMatching (2)
                  }
        MAX-ACCESS   read-create
        STATUS   current



Baker & Coltun              Standards Track                    [Page 60]


RFC 1850                        OSPF MIB                   November 1995


        DESCRIPTION
           "Subnets subsumed by ranges either trigger  the
           advertisement  of  the indicated aggregate (ad-
           vertiseMatching), or result in the subnet's not
           being advertised at all outside the area."
       DEFVAL   { advertiseMatching }
       ::= { ospfAreaAggregateEntry 6 }


-- conformance information

ospfConformance OBJECT IDENTIFIER ::= { ospf 15 }

ospfGroups      OBJECT IDENTIFIER ::= { ospfConformance 1 }
ospfCompliances OBJECT IDENTIFIER ::= { ospfConformance 2 }

-- compliance statements

    ospfCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
           "The compliance statement "
       MODULE  -- this module
       MANDATORY-GROUPS {
                    ospfBasicGroup,
                    ospfAreaGroup,
                    ospfStubAreaGroup,
                    ospfIfGroup,
                    ospfIfMetricGroup,
                    ospfVirtIfGroup,
                    ospfNbrGroup,
                    ospfVirtNbrGroup,
                    ospfAreaAggregateGroup
           }
       ::= { ospfCompliances 1 }


-- units of conformance

    ospfBasicGroup    OBJECT-GROUP
        OBJECTS {
                    ospfRouterId,
                    ospfAdminStat,
                    ospfVersionNumber,
                    ospfAreaBdrRtrStatus,
                    ospfASBdrRtrStatus,
                    ospfExternLsaCount,
                    ospfExternLsaCksumSum,



Baker & Coltun              Standards Track                    [Page 61]


RFC 1850                        OSPF MIB                   November 1995


                    ospfTOSSupport,
                    ospfOriginateNewLsas,
                    ospfRxNewLsas,
                    ospfExtLsdbLimit,
                    ospfMulticastExtensions,
                    ospfExitOverflowInterval,
                    ospfDemandExtensions
        }
        STATUS  current
        DESCRIPTION
           "These objects are required for OSPF systems."
       ::= { ospfGroups 1 }


    ospfAreaGroup    OBJECT-GROUP
        OBJECTS {
                    ospfAreaId,
                    ospfImportAsExtern,
                    ospfSpfRuns,
                    ospfAreaBdrRtrCount,
                    ospfAsBdrRtrCount,
                    ospfAreaLsaCount,
                    ospfAreaLsaCksumSum,
                    ospfAreaSummary,
                    ospfAreaStatus
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  for  OSPF  systems
           supporting areas."
       ::= { ospfGroups 2 }


    ospfStubAreaGroup    OBJECT-GROUP
        OBJECTS {
                    ospfStubAreaId,
                    ospfStubTOS,
                    ospfStubMetric,
                    ospfStubStatus,
                    ospfStubMetricType
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  for  OSPF  systems
           supporting stub areas."
       ::= { ospfGroups 3 }





Baker & Coltun              Standards Track                    [Page 62]


RFC 1850                        OSPF MIB                   November 1995


    ospfLsdbGroup    OBJECT-GROUP
        OBJECTS {
                    ospfLsdbAreaId,
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId,
                    ospfLsdbSequence,
                    ospfLsdbAge,
                    ospfLsdbChecksum,
                    ospfLsdbAdvertisement
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  for  OSPF  systems
           that display their link state database."
       ::= { ospfGroups 4 }


    ospfAreaRangeGroup    OBJECT-GROUP
        OBJECTS {
                    ospfAreaRangeAreaId,
                    ospfAreaRangeNet,
                    ospfAreaRangeMask,
                    ospfAreaRangeStatus,
                    ospfAreaRangeEffect
        }
        STATUS  obsolete
        DESCRIPTION
           "These objects are required for  non-CIDR  OSPF
           systems that support multiple areas."
       ::= { ospfGroups 5 }


    ospfHostGroup    OBJECT-GROUP
        OBJECTS {
                    ospfHostIpAddress,
                    ospfHostTOS,
                    ospfHostMetric,
                    ospfHostStatus,
                    ospfHostAreaID
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  for  OSPF  systems
           that support attached hosts."
       ::= { ospfGroups 6 }





Baker & Coltun              Standards Track                    [Page 63]


RFC 1850                        OSPF MIB                   November 1995


    ospfIfGroup    OBJECT-GROUP
        OBJECTS {
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfIfAreaId,
                    ospfIfType,
                    ospfIfAdminStat,
                    ospfIfRtrPriority,
                    ospfIfTransitDelay,
                    ospfIfRetransInterval,
                    ospfIfHelloInterval,
                    ospfIfRtrDeadInterval,
                    ospfIfPollInterval,
                    ospfIfState,
                    ospfIfDesignatedRouter,
                    ospfIfBackupDesignatedRouter,
                    ospfIfEvents,
                    ospfIfAuthType,
                    ospfIfAuthKey,
                    ospfIfStatus,
                    ospfIfMulticastForwarding,
                    ospfIfDemand
        }
        STATUS  current
        DESCRIPTION
           "These objects are required for OSPF systems."
       ::= { ospfGroups 7 }


    ospfIfMetricGroup    OBJECT-GROUP
        OBJECTS {
                    ospfIfMetricIpAddress,
                    ospfIfMetricAddressLessIf,
                    ospfIfMetricTOS,
                    ospfIfMetricValue,
                    ospfIfMetricStatus
        }
        STATUS  current
        DESCRIPTION
           "These objects are required for OSPF systems."
       ::= { ospfGroups 8 }


    ospfVirtIfGroup    OBJECT-GROUP
        OBJECTS {
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfVirtIfTransitDelay,



Baker & Coltun              Standards Track                    [Page 64]


RFC 1850                        OSPF MIB                   November 1995


                    ospfVirtIfRetransInterval,
                    ospfVirtIfHelloInterval,
                    ospfVirtIfRtrDeadInterval,
                    ospfVirtIfState,
                    ospfVirtIfEvents,
                    ospfVirtIfAuthType,
                    ospfVirtIfAuthKey,
                    ospfVirtIfStatus
        }
        STATUS  current
        DESCRIPTION
           "These objects are required for OSPF systems."
       ::= { ospfGroups 9 }


    ospfNbrGroup    OBJECT-GROUP
        OBJECTS {
                    ospfNbrIpAddr,
                    ospfNbrAddressLessIndex,
                    ospfNbrRtrId,
                    ospfNbrOptions,
                    ospfNbrPriority,
                    ospfNbrState,
                    ospfNbrEvents,
                    ospfNbrLsRetransQLen,
                    ospfNbmaNbrStatus,
                    ospfNbmaNbrPermanence,
                    ospfNbrHelloSuppressed
        }
        STATUS  current
        DESCRIPTION
           "These objects are required for OSPF systems."
       ::= { ospfGroups 10 }


    ospfVirtNbrGroup    OBJECT-GROUP
        OBJECTS {
                    ospfVirtNbrArea,
                    ospfVirtNbrRtrId,
                    ospfVirtNbrIpAddr,
                    ospfVirtNbrOptions,
                    ospfVirtNbrState,
                    ospfVirtNbrEvents,
                    ospfVirtNbrLsRetransQLen,
                    ospfVirtNbrHelloSuppressed
        }
        STATUS  current
        DESCRIPTION



Baker & Coltun              Standards Track                    [Page 65]


RFC 1850                        OSPF MIB                   November 1995


           "These objects are required for OSPF systems."
       ::= { ospfGroups 11 }


    ospfExtLsdbGroup    OBJECT-GROUP
        OBJECTS {
                    ospfExtLsdbType,
                    ospfExtLsdbLsid,
                    ospfExtLsdbRouterId,
                    ospfExtLsdbSequence,
                    ospfExtLsdbAge,
                    ospfExtLsdbChecksum,
                    ospfExtLsdbAdvertisement
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  for  OSPF  systems
           that display their link state database."
       ::= { ospfGroups 12 }


    ospfAreaAggregateGroup    OBJECT-GROUP
        OBJECTS {
                    ospfAreaAggregateAreaID,
                    ospfAreaAggregateLsdbType,
                    ospfAreaAggregateNet,
                    ospfAreaAggregateMask,
                    ospfAreaAggregateStatus,
                    ospfAreaAggregateEffect
        }
        STATUS  current
        DESCRIPTION
           "These objects are required for OSPF systems."
       ::= { ospfGroups 13 }

END

4.  OSPF Traps

   OSPF is an event driven routing protocol, where an event can be a
   change in an OSPF interface's link-level status, the expiration of an
   OSPF timer or the reception of an OSPF protocol packet.  Many of the
   actions that OSPF takes as a result of these events will result in a
   change of the routing topology.  As routing topologies become large
   and complex it is often difficult to locate the source of a topology
   change or unpredicted routing path by polling a large number or
   routers.  Another approach is to notify a network manager of
   potentially critical OSPF events with SNMP traps.



Baker & Coltun              Standards Track                    [Page 66]


RFC 1850                        OSPF MIB                   November 1995


   This section defines a set of traps, objects and mechanisms to
   enhance the ability to manage IP internetworks which use OSPF as its
   IGP.  It is an optional but useful extension to the OSPF MIB.

4.1.  Format Of Trap Definitions

   Section 7 contains contains the trap definitions.

4.2.  Approach

   The mechanism for sending traps is straight-forward.  When an
   exception event occurs, the application notifies the local agent who
   sends a trap to the appropriate SNMP management stations.  The
   message includes the trap type and may include a list of trap
   specific variables.  A new object is defined in section 3.2 that will
   allow a network manager to enable or disable particular OSPF traps.
   Section 5 gives the trap definitions which includes the variable
   lists.  The router ID of the originator of the trap is included in
   the variable list so that the network manager may easily determine
   the source of the trap.

   To limit the frequency of OSPF traps, the following additional
   mechanisms are suggested.

4.3.  Ignoring Initial Activity

   The majority of critical events occur when OSPF is enabled on a
   router, at which time the designated router is elected and neighbor
   adjacencies are formed.  During this initial period a potential flood
   of traps is unnecessary since the events are expected.  To avoid
   unnecessary traps, a router should not originate expected OSPF
   interface related traps until two of that interface's dead timer
   intervals have elapsed.  The expected OSPF interface traps are
   ospfIfStateChange, ospfVirtIfStateChange, ospfNbrStateChange,
   ospfVirtNbrStateChange, ospfTxRetranmit and ospfVirtIfTxRetransmit.
   Additionally, ospfMaxAgeLsa and ospfOriginateLsa traps should not be
   originated until two dead timer intervals have elapsed where the dead
   timer interval used should be the dead timer with the smallest value.

4.4.  Throttling Traps

   The mechanism for throttling the traps is similar to the mechanism
   explained in RFC 1224 [11], section 5.  The basic idea is that there
   is a sliding window in seconds and an upper bound on the number of
   traps that may be generated within this window.  Unlike RFC 1224,
   traps are not sent to inform the network manager that the throttling
   mechanism has kicked in.




Baker & Coltun              Standards Track                    [Page 67]


RFC 1850                        OSPF MIB                   November 1995


   A single window should be used to throttle all OSPF traps types
   except for the ospfLsdbOverflow and the ospfLsdbApproachingOverflow
   trap which should not be throttled.  For example, if the window time
   is 3, the upper bound is 3 and the events that would cause trap types
   1,3,5 and 7 occur within a 3 second period, the type 7 trap should
   not be generated.

   Appropriate values are 7 traps with a window time of 10 seconds.

4.5.  One Trap Per OSPF Event

   Several of the traps defined in section 5 are generated as the result
   of finding an unusual condition while parsing an OSPF packet or a
   processing a timer event.  There may be more than one unusual
   condition detected while handling the event.  For example, a link-
   state update packet may contain several retransmitted link-state
   advertisements (LSAs), or a retransmitted database description packet
   may contain several database description entries.  To limit the
   number of traps and variables, OSPF should generate at most one trap
   per OSPF event.  Only the variables associated with the first unusual
   condition should be included with the trap.  Similarly, if more than
   one type of unusual condition is encountered while parsing the
   packet, only the first event will generate a trap.

4.6.  Polling Event Counters

   Many of the tables in the OSPF MIB contain generalized event
   counters.  By enabling the traps defined in this document a network
   manager can obtain more specific information about these events.  A
   network manager may want to poll these event counters and enable
   specific OSPF traps when a particular counter starts increasing
   abnormally.

   The following table shows the relationship between the event counters
   defined in the OSPF MIB and the trap types defined in section 5.


           Counter32                   Trap Type
    -----------------------   ------------------------
    ospfOriginateNewLsas       ospfOriginateLsa
    ospfIfEvents               ospfIfStateChange
                               ospfConfigError
                               ospfIfAuthFailure
                               ospfRxBadPacket
                               ospfTxRetransmit
    ospfVirtIfEvents           ospfVirtIfStateChange
                               ospfVirtIfConfigError
                               ospfVirtIfAuthFailure



Baker & Coltun              Standards Track                    [Page 68]


RFC 1850                        OSPF MIB                   November 1995


                               ospfVirtIfRxBadPacket
                               ospfVirtIfTxRetransmit
    ospfNbrEvents              ospfNbrStateChange
    ospfVirtNbrEvents          ospfVirtNbrStateChange
    ospfExternLSACount         ospfLsdbApproachingOverflow
    ospfExternLSACount         ospfLsdbOverflow

5.  OSPF Trap Definitions

OSPF-TRAP-MIB DEFINITIONS ::= BEGIN

    IMPORTS
            MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
                FROM SNMPv2-SMI
            MODULE-COMPLIANCE, OBJECT-GROUP
                FROM SNMPv2-CONF
            ospfRouterId, ospfIfIpAddress, ospfAddressLessIf, ospfIfState,
            ospfVirtIfAreaId, ospfVirtIfNeighbor, ospfVirtIfState,
            ospfNbrIpAddr, ospfNbrAddressLessIndex, ospfNbrRtrId,
            ospfNbrState, ospfVirtNbrArea, ospfVirtNbrRtrId, ospfVirtNbrState,
            ospfLsdbType, ospfLsdbLsid, ospfLsdbRouterId, ospfLsdbAreaId,
            ospfExtLsdbLimit, ospf
                FROM OSPF-MIB;

    ospfTrap MODULE-IDENTITY
           LAST-UPDATED "9501201225Z" -- Fri Jan 20 12:25:50 PST 1995
           ORGANIZATION "IETF OSPF Working Group"
           CONTACT-INFO
           "                      Fred Baker
           Postal:                Cisco Systems
                                  519 Lado Drive
                                  Santa Barbara, California 93111
           Tel:                   +1 805 681 0115
           E-Mail:                fred@cisco.com

                                  Rob Coltun
           Postal:                RainbowBridge Communications
           Tel:                   (301) 340-9416
           E-Mail:                rcoltun@rainbow-bridge.com"
       DESCRIPTION
          "The MIB module to describe traps for  the  OSPF
          Version 2 Protocol."
      ::= { ospf 16 }

-- Trap Support Objects

--         The following are support objects for the OSPF traps.




Baker & Coltun              Standards Track                    [Page 69]


RFC 1850                        OSPF MIB                   November 1995


ospfTrapControl OBJECT IDENTIFIER ::= { ospfTrap 1 }
ospfTraps OBJECT IDENTIFIER ::= { ospfTrap 2 }

    ospfSetTrap OBJECT-TYPE
        SYNTAX   OCTET STRING (SIZE(4))
        MAX-ACCESS   read-write
        STATUS   current
        DESCRIPTION
           "A four-octet string serving as a bit  map  for
           the trap events defined by the OSPF traps. This
           object is used to enable and  disable  specific
           OSPF   traps   where  a  1  in  the  bit  field
           represents enabled.  The right-most bit  (least
           significant) represents trap 0."
       ::= { ospfTrapControl 1 }


    ospfConfigErrorType OBJECT-TYPE
        SYNTAX   INTEGER   {
                    badVersion (1),
                    areaMismatch (2),
                    unknownNbmaNbr (3), -- Router is Dr eligible
                    unknownVirtualNbr (4),
                    authTypeMismatch(5),
                    authFailure (6),
                    netMaskMismatch (7),
                    helloIntervalMismatch (8),
                    deadIntervalMismatch (9),
                    optionMismatch (10) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "Potential types  of  configuration  conflicts.
           Used  by the ospfConfigError and ospfConfigVir-
           tError traps."
   ::= { ospfTrapControl 2 }


    ospfPacketType OBJECT-TYPE
        SYNTAX   INTEGER   {
                    hello (1),
                    dbDescript (2),
                    lsReq (3),
                    lsUpdate (4),
                    lsAck (5) }
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION



Baker & Coltun              Standards Track                    [Page 70]


RFC 1850                        OSPF MIB                   November 1995


           "OSPF packet types."
   ::= { ospfTrapControl 3 }


    ospfPacketSrc OBJECT-TYPE
        SYNTAX   IpAddress
        MAX-ACCESS   read-only
        STATUS   current
        DESCRIPTION
           "The IP address of an inbound packet that  can-
           not be identified by a neighbor instance."
       ::= { ospfTrapControl 4 }


-- Traps


    ospfIfStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfIfState   -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfStateChange trap signifies that there
           has been a change in the state of a non-virtual
           OSPF interface. This trap should  be  generated
           when  the interface state regresses (e.g., goes
           from Dr to Down) or progresses  to  a  terminal
           state  (i.e.,  Point-to-Point, DR Other, Dr, or
           Backup)."
   ::= { ospfTraps 16 }


    ospfVirtIfStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfVirtIfState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfStateChange trap signifies that there
           has  been a change in the state of an OSPF vir-
           tual interface.



Baker & Coltun              Standards Track                    [Page 71]


RFC 1850                        OSPF MIB                   November 1995


           This trap should be generated when  the  inter-
           face  state  regresses  (e.g., goes from Point-
           to-Point to Down) or progresses to  a  terminal
           state (i.e., Point-to-Point)."
   ::= { ospfTraps 1 }


    ospfNbrStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfNbrIpAddr,
                    ospfNbrAddressLessIndex,
                    ospfNbrRtrId,
                    ospfNbrState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An  ospfNbrStateChange  trap  signifies   that
           there  has been a change in the state of a non-
           virtual OSPF neighbor.   This  trap  should  be
           generated  when  the  neighbor  state regresses
           (e.g., goes from Attempt or Full  to  1-Way  or
           Down)  or progresses to a terminal state (e.g.,
           2-Way or Full).  When an  neighbor  transitions
           from  or  to Full on non-broadcast multi-access
           and broadcast networks, the trap should be gen-
           erated  by the designated router.  A designated
           router transitioning to Down will be  noted  by
           ospfIfStateChange."
   ::= { ospfTraps 2 }


    ospfVirtNbrStateChange NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtNbrArea,
                    ospfVirtNbrRtrId,
                    ospfVirtNbrState  -- The new state
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfStateChange trap signifies that there
           has  been a change in the state of an OSPF vir-
           tual neighbor.  This trap should  be  generated
           when  the  neighbor state regresses (e.g., goes
           from Attempt or  Full  to  1-Way  or  Down)  or
           progresses to a terminal state (e.g., Full)."
   ::= { ospfTraps 3 }



Baker & Coltun              Standards Track                    [Page 72]


RFC 1850                        OSPF MIB                   November 1995


    ospfIfConfigError NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfPacketSrc,  -- The source IP address
                    ospfConfigErrorType, -- Type of error
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfConfigError  trap  signifies  that  a
           packet  has  been received on a non-virtual in-
           terface  from  a  router  whose   configuration
           parameters  conflict  with this router's confi-
           guration parameters.  Note that the  event  op-
           tionMismatch  should  cause  a  trap only if it
           prevents an adjacency from forming."
                  ::= { ospfTraps 4 }


    ospfVirtIfConfigError NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfConfigErrorType, -- Type of error
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfConfigError trap signifies that a pack-
           et  has  been  received  on a virtual interface
           from a router  whose  configuration  parameters
           conflict   with   this  router's  configuration
           parameters.  Note that the event optionMismatch
           should  cause a trap only if it prevents an ad-
           jacency from forming."
   ::= { ospfTraps 5 }


    ospfIfAuthFailure NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfPacketSrc,  -- The source IP address
                    ospfConfigErrorType, -- authTypeMismatch or



Baker & Coltun              Standards Track                    [Page 73]


RFC 1850                        OSPF MIB                   November 1995


                                         -- authFailure
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfAuthFailure  trap  signifies  that  a
           packet  has  been received on a non-virtual in-
           terface from a router whose authentication  key
           or  authentication  type  conflicts  with  this
           router's authentication key  or  authentication
           type."
   ::= { ospfTraps 6 }


    ospfVirtIfAuthFailure NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfConfigErrorType, -- authTypeMismatch or
                                         -- authFailure
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfVirtIfAuthFailure trap signifies that a
           packet has been received on a virtual interface
           from a router whose authentication key  or  au-
           thentication  type conflicts with this router's
           authentication key or authentication type."
   ::= { ospfTraps 7 }


    ospfIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfPacketSrc,  -- The source IP address
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfIfRxBadPacket trap  signifies  that  an
           OSPF  packet has been received on a non-virtual
           interface that cannot be parsed."
   ::= { ospfTraps 8 }




Baker & Coltun              Standards Track                    [Page 74]


RFC 1850                        OSPF MIB                   November 1995


    ospfVirtIfRxBadPacket NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfPacketType
                  }
        STATUS             current
        DESCRIPTION
           "An ospfRxBadPacket trap signifies that an OSPF
           packet has been received on a virtual interface
           that cannot be parsed."
   ::= { ospfTraps 9 }


    ospfTxRetransmit NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfIfIpAddress,
                    ospfAddressLessIf,
                    ospfNbrRtrId, -- Destination
                    ospfPacketType,
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfTxRetransmit  trap  signifies  than  an
           OSPF  packet  has  been retransmitted on a non-
           virtual interface.  All packets that may be re-
           transmitted  are associated with an LSDB entry.
           The LS type, LS ID, and Router ID are  used  to
           identify the LSDB entry."
   ::= { ospfTraps 10 }


    ospfVirtIfTxRetransmit NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfVirtIfAreaId,
                    ospfVirtIfNeighbor,
                    ospfPacketType,
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current



Baker & Coltun              Standards Track                    [Page 75]


RFC 1850                        OSPF MIB                   November 1995


        DESCRIPTION
           "An ospfTxRetransmit  trap  signifies  than  an
           OSPF packet has been retransmitted on a virtual
           interface.  All packets that may be retransmit-
           ted  are  associated with an LSDB entry. The LS
           type, LS ID, and Router ID are used to identify
           the LSDB entry."
   ::= { ospfTraps 11 }


    ospfOriginateLsa NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfOriginateLsa trap signifies that a  new
           LSA  has  been originated by this router.  This
           trap should not be invoked for simple refreshes
           of  LSAs  (which happesn every 30 minutes), but
           instead will only be invoked  when  an  LSA  is
           (re)originated due to a topology change.  Addi-
           tionally, this trap does not include LSAs  that
           are  being  flushed  because  they have reached
           MaxAge."
   ::= { ospfTraps 12 }


    ospfMaxAgeLsa NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfLsdbAreaId,  -- 0.0.0.0 for AS Externals
                    ospfLsdbType,
                    ospfLsdbLsid,
                    ospfLsdbRouterId
                  }
        STATUS             current
        DESCRIPTION
           "An ospfMaxAgeLsa trap signifies  that  one  of
           the LSA in the router's link-state database has
           aged to MaxAge."
   ::= { ospfTraps 13 }





Baker & Coltun              Standards Track                    [Page 76]


RFC 1850                        OSPF MIB                   November 1995


    ospfLsdbOverflow NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfExtLsdbLimit
                  }
        STATUS             current
        DESCRIPTION
           "An ospfLsdbOverflow trap  signifies  that  the
           number of LSAs in the router's link-state data-
           base has exceeded ospfExtLsdbLimit."
   ::= { ospfTraps 14 }


    ospfLsdbApproachingOverflow NOTIFICATION-TYPE
        OBJECTS {
                    ospfRouterId, -- The originator of the trap
                    ospfExtLsdbLimit
                  }
        STATUS             current
        DESCRIPTION
           "An ospfLsdbApproachingOverflow trap  signifies
           that  the  number of LSAs in the router's link-
           state database has exceeded ninety  percent  of
           ospfExtLsdbLimit."
   ::= { ospfTraps 15 }


-- conformance information

ospfTrapConformance OBJECT IDENTIFIER ::= { ospfTrap 3 }

ospfTrapGroups      OBJECT IDENTIFIER ::= { ospfTrapConformance 1 }
ospfTrapCompliances OBJECT IDENTIFIER ::= { ospfTrapConformance 2 }

-- compliance statements

    ospfTrapCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
           "The compliance statement "
       MODULE  -- this module
       MANDATORY-GROUPS { ospfTrapControlGroup }


        GROUP       ospfTrapControlGroup
        DESCRIPTION
           "This group is optional but recommended for all
           OSPF systems"



Baker & Coltun              Standards Track                    [Page 77]


RFC 1850                        OSPF MIB                   November 1995


       ::= { ospfTrapCompliances 1 }


-- units of conformance

    ospfTrapControlGroup    OBJECT-GROUP
        OBJECTS {
                           ospfSetTrap,
                           ospfConfigErrorType,
                           ospfPacketType,
                           ospfPacketSrc
        }
        STATUS  current
        DESCRIPTION
           "These objects are required  to  control  traps
           from OSPF systems."
       ::= { ospfTrapGroups 1 }


END

6.  Acknowledgements

   This document was produced by the OSPF Working Group.

7.  References

   [1] Cerf, V., "IAB Recommendations for the Development of Internet
       Network Management Standards", RFC 1052, NRI, April 1988.

   [2] Cerf, V., "Report of the Second Ad Hoc Network Management Review
       Group", RFC 1109, NRI, August 1989.

   [3] Rose M., and K. McCloghrie, "Structure and Identification of
       Management Information for TCP/IP-based internets", STD 16, RFC
       1155, Performance Systems International, Hughes LAN Systems, May
       1990.

   [4] McCloghrie K., and M. Rose, "Management Information Base for
       Network Management of TCP/IP-based internets", RFC 1156, Hughes
       LAN Systems, Performance Systems International, May 1990.

   [5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
       Network Management Protocol", STD 15, RFC 1157, SNMP Research,
       Performance Systems International, Performance Systems
       International, MIT Laboratory for Computer Science, May 1990.





Baker & Coltun              Standards Track                    [Page 78]


RFC 1850                        OSPF MIB                   November 1995


   [6] Rose M., Editor, "Management Information Base for Network
       Management of TCP/IP-based internets: MIB-II", STD 17, RFC 1213,
       Performance Systems International, March 1991.

   [7] Information processing systems - Open Systems Interconnection -
       Specification of Abstract Syntax Notation One (ASN.1),
       International Organization for Standardization, International
       Standard 8824, December 1987.

   [8] Information processing systems - Open Systems Interconnection -
       Specification of Basic Encoding Rules for Abstract Notation One
       (ASN.1), International Organization for Standardization,
       International Standard 8825, December 1987.

   [9] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
       STD 16, RFC 1212, Performance Systems International, Hughes LAN
       Systems, March 1991.

  [10] Rose, M., Editor, "A Convention for Defining Traps for use with
       the SNMP", RFC 1215, Performance Systems International, March
       1991.

  [11] Steinberg, L., "Techniques for Managing Asynchronously Generated
       Alerts", RFC 1224, IBM Corporation, May 1991.

  [12] Moy, J., "Multicast Extensions to OSPF", RFC 1584, Proteon, Inc.,
       September 1993.
























Baker & Coltun              Standards Track                    [Page 79]


RFC 1850                        OSPF MIB                   November 1995


8.  Security Considerations

   Security issues are not discussed in this memo.

9.  Authors' Addresses

   Fred Baker
   cisco Systems, Inc.
   519 Lado Drive
   Santa Barbara, CA 93111

   Phone: (805) 681-0115
   EMail: fred@cisco.com


   Rob Coltun
   RainbowBridge Communications

   Phone: (301) 340-9416
   EMail: rcoltun@rainbow-bridge.com































Baker & Coltun              Standards Track                    [Page 80]