Network Working Group                                           A. Niemi
Request for Comments: 5264                                   M. Lonnfors
Category: Standards Track                                          Nokia
                                                             E. Leppanen
                                                              Individual
                                                          September 2008


              Publication of Partial Presence Information

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

   The Session Initiation Protocol (SIP) Extension for Event State
   Publication describes a mechanism with which a presence user agent is
   able to publish presence information to a presence agent.  Using the
   Presence Information Data Format (PIDF), each presence publication
   contains full state, regardless of how much of that information has
   actually changed since the previous update.  As a consequence,
   updating a sizeable presence document with small changes bears a
   considerable overhead and is therefore inefficient.  Especially with
   low bandwidth and high latency links, this can constitute a
   considerable burden to the system.  This memo defines a solution that
   aids in reducing the impact of those constraints and increases
   transport efficiency by introducing a mechanism that allows for
   publication of partial presence information.


















Niemi, et al.               Standards Track                     [Page 1]


RFC 5264                  Partial Publication             September 2008


Table of Contents

   1. Introduction ....................................................2
   2. Definitions and Document Conventions ............................3
   3. Overall Operation ...............................................3
      3.1. Presence Publication .......................................3
      3.2. Partial Presence Publication ...............................4
   4. Client and Server Operation .....................................5
      4.1. Content-Type for Partial Publications ......................5
      4.2. Generation of Partial Publications .........................5
      4.3. Processing of Partial Publications .........................7
           4.3.1. Processing <pidf-full> ..............................7
           4.3.2. Processing <pidf-diff> ..............................7
   5. Security Considerations .........................................8
   6. Examples ........................................................8
   7. Acknowledgements ...............................................12
   8. References .....................................................12
      8.1. Normative References ......................................12
      8.2. Informative References ....................................13

1.  Introduction

   The Session Initiation Protocol (SIP) Extension for Event State
   Publication [RFC3903] allows Presence User Agents ('PUA') to publish
   presence information of a user ('presentity').  The Presence Agent
   (PA) collects publications from one or several presence user agents,
   and generates the composite event state of the presentity.

   The baseline format for presence information is defined in the
   Presence Information Data Format (PIDF) [RFC3863] and is by default
   used in presence publication.  The PIDF uses Extensible Markup
   Language (XML) [W3C.REC-xml], and groups data into elements called
   tuples.  In addition, [RFC4479], [RFC4480], [RFC4481], [RFC4482], and
   [RFC5196] define extension elements that provide various additional
   features to PIDF.

   Presence publication by default uses the PIDF document format, and
   each publication contains full state, regardless of how much of the
   presence information has actually changed since the previous update.
   As a consequence, updating a sizeable presence document especially
   with small changes bears a considerable overhead and is therefore
   inefficient.  Publication of information over low bandwidth and high
   latency links further exacerbates this inefficiency.

   This memo specifies a mechanism with which the PUA is after an
   initial full state publication able to publish only those parts of
   the presence document that have changed since the previous update.
   This is accomplished using the partial PIDF [RFC5262] document format



Niemi, et al.               Standards Track                     [Page 2]


RFC 5264                  Partial Publication             September 2008


   to communicate a set of presence document changes to the PA, who then
   applies the changes in sequence to its version of the presence
   document.

   This memo is structured in the following way: Section 3 gives an
   overview of the partial publication mechanism, Section 4 includes the
   detailed specification, Section 5 includes discussion of security
   considerations, and Section 6 includes examples of partial
   publication.

2.  Definitions and Document Conventions

   In this document, the key words "MUST", "MUST NOT", "REQUIRED",
   "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
   and "OPTIONAL" are to be interpreted as described in RFC 2119, BCP 14
   [RFC2119], and indicate requirement levels for compliant
   implementations.

   This document makes use of the vocabulary defined in the Model for
   Presence and Instant Messaging [RFC2778], the Event State Publication
   Extension to SIP [RFC3903], and the PIDF Extension for Partial
   Presence [RFC5262].

3.  Overall Operation

   This section introduces the baseline functionality for presence
   publication, and gives an overview of the partial publication
   mechanism.  This section is informational in nature.  It does not
   contain any normative statements.

3.1.  Presence Publication

   Event State Publication is specified in [RFC3903].

   The publication of presence information consists of a presence user
   agent sending a SIP PUBLISH request [RFC3903] targeted to the
   address-of-record of the presentity, and serviced by a presence agent
   or compositor.  The body of the PUBLISH request carries full event
   state in the form of a presence document.

   The compositor processes the PUBLISH request and stores the presence
   information.  It also assigns an entity-tag that is used to identify
   the publication.  This entity-tag is returned to the PUA in the
   response to the PUBLISH request.

   The PUA uses the entity-tag in the following PUBLISH request for
   identifying the publication that the request is meant to refresh,
   modify or remove.  Presence information is stored in an initial



Niemi, et al.               Standards Track                     [Page 3]


RFC 5264                  Partial Publication             September 2008


   publication, and maintained using the refreshing and modifying
   publications.  Presence information disappears either by explicitly
   removing it or when it meets its expiration time.

3.2.  Partial Presence Publication

   The partial publication mechanism enables the PUA to update only
   parts of its presence information, namely those sections of the
   presence document that have changed.  The initial publication always
   carries full state.  However, successive modifying publications to
   this initial presence state can communicate state deltas, i.e., one
   or more changes to the presence information since the previous
   update.  Versioning of these partial publications is necessary to
   guarantee that the changes are applied in the correct order.  The
   PUBLISH method [RFC3903] already accomplishes this using entity-tags
   and conditional requests, which guarantee correct ordering of
   publication updates.

      Note that the partial PIDF format [RFC5262] contains the 'version'
      attribute that could be used for versioning as well.  However, we
      chose not to introduce an additional versioning mechanism to
      partial publish, since that would only add ambiguity and a
      potentially undefined error case if the two versioning mechanisms
      were to somehow contradict.

   To initialize its publication of presence information, the PUA first
   publishes a full state initial publication.  The consequent modifying
   publications can carry either state deltas or full state.  Both
   initial and modifying partial presence publications are accomplished
   using the 'application/pidf-diff+xml' content type [RFC5262], with
   the former using the <pidf-full> root element, and the latter using
   the <pidf-diff> or <pidf-full> root elements, respectively.

   While the <pidf-full> encapsulates a regular PIDF document, the
   <pidf-diff> can contain one or more operations for adding new
   elements or attributes (<add> elements), replacing elements or
   attributes whose content has changed (<replace> elements), or
   indications of removal of certain elements or attributes (<remove>
   elements).  The PUA is free to decide the granularity by which
   changes in presence information are communicated to the composer.  It
   may very well happen that there are enough changes to be communicated
   that it is more efficient to send a full state publication instead of
   a set of state deltas.

   When the presence compositor receives a partial publication, it
   applies the included patch operations in sequence.  The resulting
   changed (or patched) presence document is then submitted to the
   composition logic in the same manner as with a full state presence



Niemi, et al.               Standards Track                     [Page 4]


RFC 5264                  Partial Publication             September 2008


   publication.  Similarly, any changes to the publication expiration
   apply to the full, patched presence publication.  In other words,
   there is no possibility to roll back to an earlier version, except by
   submitting a full state publication.

4.  Client and Server Operation

   Unless otherwise specified in this document, the presence user agent
   and presence agent behavior are as defined in [RFC3903].

4.1.  Content-Type for Partial Publications

   The entities supporting the partial publication extension described
   in this document MUST support the 'application/pidf-diff+xml' content
   type defined in the partial PIDF format [RFC5262], in addition to the
   baseline 'application/pidf+xml' content type defined in [RFC3863].

   Listing the partial PIDF content type in the Accept header field of a
   SIP response is an explicit indication of support for the partial
   publication mechanism.  The PUA can learn server support either as a
   result of an explicit query, i.e., in a response to an OPTIONS
   request, or by trial-and-error, i.e., after a 415 error response is
   returned to an attempted partial publication.

4.2.  Generation of Partial Publications

   Whenever a PUA decides to begin publication of partial presence
   information, it first needs to make an initial publication.  This
   initial publication always carries full state.  After the initial
   publication, presence information can be updated using modifying
   publications; the modifications can carry state deltas as well as
   full state.  Finally, the publication can be terminated by explicit
   removal, or by expiration.

   Both the initial and modifying publications make use of the partial
   presence document format [RFC5262], and all follow the normal rules
   for creating publications, as defined in RFC 3903 [RFC3903], Section
   4.

   If the initial PUBLISH request returns a 415 (Unsupported Media
   Type), it means that the compositor did not understand the partial
   publication format.  In this case, the PUA MUST follow normal
   procedures for handling a 400-class response, as specified in Section
   8.1.3.5 of [RFC3261].  Specifically, the PUA SHOULD retry the
   publication using the default PIDF content type, namely 'application/
   pidf+xml'.  In addition, to find out a priori whether a specific
   presence compositor supports partial presence publication, the PUA
   MAY use the OPTIONS method, as described in [RFC3261].



Niemi, et al.               Standards Track                     [Page 5]


RFC 5264                  Partial Publication             September 2008


   To construct a full-state publication, the PUA uses the following
   process:

   o  The Content-Type header field in the PUBLISH request MUST be set
      to the value 'application/pidf-diff+xml'.

   o  The document in the body of the request is populated with a <pidf-
      full> root element that includes the 'entity' attribute set to
      identify the presentity.

   o  Under the <pidf-full> root element exists all of the children of a
      PIDF [RFC3863] <presence> element.  This document contains the
      full state of which the PUA is aware, and MAY include elements
      from any extension namespace.

   To construct a partial publication, the following process is
   followed:

   o  The Content-Type header field in the PUBLISH request MUST be set
      to the value 'application/pidf-diff+xml'.

   o  The document in the body of the request is populated with a <pidf-
      diff> root element that includes the 'entity' attribute
      identifying the presentity.

   o  Under the <pidf-diff> root element exists a set of patch
      operations that communicate the changes to the presentity's
      presence information.  These operations MUST be constructed in
      sequence, and as defined in the partial PIDF format [RFC5262].

   The PUA is free to decide the granularity by which changes in the
   presentity's presence information are communicated to the presence
   compositor.  In order to reduce unnecessary network traffic, the PUA
   SHOULD batch several patch operations in a single PUBLISH request.

      A reasonable granularity might be to batch state changes resulting
      from related UI events together in a single PUBLISH request.  For
      example, when the user sets their status to "Away", several things
      including freetext notes, service availability, and activities
      might change as a result.

   If the size of the delta state becomes more than the size of the full
   state, the PUA SHOULD instead send a modifying publication carrying
   full state, unless this size comparison is not possible.

      To an implementation that generates state deltas directly out of
      its internal events, it may not be trivial to determine the size
      of the corresponding full state.



Niemi, et al.               Standards Track                     [Page 6]


RFC 5264                  Partial Publication             September 2008


4.3.  Processing of Partial Publications

   For each resource, the compositor maintains a record for each of the
   publications.  These are indexed using the entity-tag of the
   publications.

   Processing of publications generally follows the guidelines set in
   [RFC3903].  In addition, processing PUBLISH requests that contain
   'application/pidf-diff+xml' require some extra processing that is
   dependant on whether the request contains full or partial state.

4.3.1.  Processing <pidf-full>

   If the value of the Content-Type header field is 'application/
   pidf-diff+xml', and the document therein contains a <pidf-full> root
   element, the publication contains full presence information, and the
   next step applies:

   o  The compositor MUST take the received presence document under the
      <pidf-full> as the local presence document, replacing any previous
      publications.

   If any errors are encountered before the entire publication is
   completely processed, the compositor MUST reject the request with a
   500 (Server Internal Error) response, and revert back to its
   original, locally stored presence information.

4.3.2.  Processing <pidf-diff>

   If the value of the Content-Type header field is 'application/
   pidf-diff+xml', and the document in the body contains a <pidf-diff>
   root element, the publication contains partial presence information
   (state delta), and the next steps apply:

   o  If the publication containing the <pidf-diff> root element is a
      modifying publication (i.e., contains an If-Match header field
      with a valid entity-tag), the compositor MUST apply the included
      patch operations in sequence against its locally stored presence
      document.

   o  Else, the publication is an initial publication, for which only
      <pidf-full> is allowed.  Therefore, the publication MUST be
      rejected with an appropriate error response, such as a 400
      (Invalid Partial Publication).

   If a publication carrying partial presence information expires
   without the PUA refreshing it, the compositor MUST clear the entire,
   full state publication.



Niemi, et al.               Standards Track                     [Page 7]


RFC 5264                  Partial Publication             September 2008


      This means that the compositor does not keep a record of the
      applied patches, and consequently (unlike some versioning
      systems), the compositor does not roll back to an earlier version
      if a particular partial publication were to expire.

   If the compositor encounters errors while processing the
   'application/pidf-diff+xml' document, it MUST reject the request with
   a 400 (Bad Request) response.  In addition, the compositor MAY
   include diagnostics information in the body of the response, using an
   appropriate error condition element defined in Section 5.1. of
   [RFC5261].

   If any other errors are encountered before the entire partial
   publication is completely processed, including all of the patch
   operations in the 'application/pidf-diff+xml' body, the compositor
   MUST reject the request with a 500 (Server Internal Error) response,
   and revert back to its original, locally stored presence information.

5.  Security Considerations

   This specification relies on protocol behavior defined in [RFC3903].
   General security considerations related to Event State Publication
   are extensively discussed in that specification and all the
   identified security considerations apply to this document in
   entirety.  In addition, this specification adds no new security
   considerations.

6.  Examples

   The following message flow (Figure 1) shows an example of a presence
   system that applies the partial publication mechanism.

   First, the PUA sends an initial publication that contains full state.
   In return, it receives a 200 OK response containing an entity-tag.
   This entity-tag serves as a reference with which the initial full
   state can be updated using partial publications containing state
   deltas.

   Then at some point the resource state changes, and the PUA assembles
   these changes into a set of patch operations.  It then sends a
   modifying publication containing the patch operations, using the
   entity-tag as a reference to the publication against which the
   patches are to be applied.  The compositor applies the received patch
   operations to its local presence document in sequence, and returns a
   200 OK, which includes a new entity-tag.






Niemi, et al.               Standards Track                     [Page 8]


RFC 5264                  Partial Publication             September 2008


                                             Presence Agent /
                     PUA                        Compositor
                      | (M1) PUBLISH                |
                      |---------------------------->|
                      | (M2) 200 OK                 |
                      |<----------------------------|
                      |                             |
                      |                             |
                      |                             |
                      | (M3) PUBLISH                |
                      |---------------------------->|
                      | (M4) 200 OK                 |
                      |<----------------------------|
                      |                             |
                     _|_                           _|_

                Figure 1: Partial Publication Message Flow

   Message details:

   (M1): PUA -> Compositor

         PUBLISH sip:resource@example.com SIP/2.0
         ...
         Event: presence
         Expires: 3600
         Content-Type: application/pidf-diff+xml
         Content-Length: 1457

         <?xml version="1.0" encoding="UTF-8"?>
         <p:pidf-full xmlns="urn:ietf:params:xml:ns:pidf"
                xmlns:p="urn:ietf:params:xml:ns:pidf-diff"
                xmlns:r="urn:ietf:params:xml:ns:pidf:rpid"
                xmlns:c="urn:ietf:params:xml:ns:pidf:caps"
                entity="pres:someone@example.com">

          <tuple id="sg89ae">
           <status>
            <basic>open</basic>
            <r:relationship>assistant</r:relationship>
           </status>
           <c:servcaps>
            <c:audio>true</c:audio>
            <c:video>false</c:video>
            <c:message>true</c:message>
           </c:servcaps>
           <contact priority="0.8">tel:09012345678</contact>
          </tuple>



Niemi, et al.               Standards Track                     [Page 9]


RFC 5264                  Partial Publication             September 2008


          <tuple id="cg231jcr">
           <status>
            <basic>open</basic>
           </status>
           <contact priority="1.0">im:pep@example.com</contact>
          </tuple>

          <tuple id="r1230d">
           <status>
            <basic>closed</basic>
            <r:activity>meeting</r:activity>
           </status>
           <r:homepage>http://example.com/~pep/</r:homepage>
           <r:icon>http://example.com/~pep/icon.gif</r:icon>
           <r:card>http://example.com/~pep/card.vcd</r:card>
           <contact priority="0.9">sip:pep@example.com</contact>
          </tuple>

          <note xml:lang="en">Full state presence document</note>
          <r:person>
           <r:status>
            <r:activities>
             <r:on-the-phone/>
             <r:busy/>
            </r:activities>
           </r:status>
          </r:person>

          <r:device id="urn:esn:600b40c7">
           <r:status>
            <c:devcaps>
             <c:mobility>
              <c:supported>
               <c:mobile/>
              </c:supported>
             </c:mobility>
            </c:devcaps>
           </r:status>
          </r:device>

         </p:pidf-full>










Niemi, et al.               Standards Track                    [Page 10]


RFC 5264                  Partial Publication             September 2008


   (M2): Compositor -> PUA

         SIP/2.0 200 OK
         ...
         SIP-ETag: 61763862389729
         Expires: 3600
         Content-Length: 0

   (M3): PUA -> Compositor

         PUBLISH sip:resource@example.com SIP/2.0
         ...
         Event: presence
         SIP-If-Match: 61763862389729
         Expires: 3600
         Content-Type: application/pidf-diff+xml
         Content-Length: 778

         <?xml version="1.0" encoding="UTF-8"?>
         <p:pidf-diff xmlns="urn:ietf:params:xml:ns:pidf"
                      xmlns:p="urn:ietf:params:xml:ns:pidf-diff"
                      xmlns:r="urn:ietf:params:xml:ns:pidf:rpid"
                      entity="pres:someone@example.com">

          <p:add sel="presence/note" pos="before"><tuple id="ert4773">
           <status>
            <basic>open</basic>
           </status>
           <contact priority="0.4">mailto:pep@example.com</contact>
           <note xml:lang="en">This is a new tuple inserted
                 between the last tuple and note element</note>
          </tuple>

          </p:add>
          <p:replace sel="*/tuple[@id='r1230d']/status/basic/text()"
           >open</p:replace>

          <p:remove sel="*/r:person/r:status/r:activities/r:busy"/>

          <p:replace sel="*/tuple[@id='cg231jcr']/contact/@priority"
           >0.7</p:replace>

         </p:pidf-diff>








Niemi, et al.               Standards Track                    [Page 11]


RFC 5264                  Partial Publication             September 2008


   (M4): Compositor -> PUA

         SIP/2.0 200 OK
         ...
         SIP-ETag: 18764920981476
         Expires: 3600
         Content-Length: 0

7.  Acknowledgements

   The authors would like to thank Atle Monrad, Christian Schmidt,
   George Foti, Fridy Sharon-Fridman, and Avshalom Houri for review
   comments.

8.  References

8.1.  Normative References

   [RFC2119]      Bradner, S., "Key words for use in RFCs to Indicate
                  Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3903]      Niemi, A., "Session Initiation Protocol (SIP)
                  Extension for Event State Publication", RFC 3903,
                  October 2004.

   [RFC3863]      Sugano, H., Fujimoto, S., Klyne, G., Bateman, A.,
                  Carr, W., and J. Peterson, "Presence Information Data
                  Format (PIDF)", RFC 3863, August 2004.

   [RFC3261]      Rosenberg, J., Schulzrinne, H., Camarillo, G.,
                  Johnston, A., Peterson, J., Sparks, R., Handley, M.,
                  and E. Schooler, "SIP: Session Initiation Protocol",
                  RFC 3261, June 2002.

   [RFC5262]      Lonnfors, M., Costa-Requena, J., Leppanen, E., and H.
                  Khartabil, "Presence Information Data Format (PIDF)
                  Extension for Partial Presence", RFC 5262, September
                  2008.

   [RFC5261]      Urpalainen, J., "An Extensible Markup Language (XML)
                  Patch Operations Framework Utilizing XML Path Language
                  (XPath) Selectors", RFC 5261, September 2008.









Niemi, et al.               Standards Track                    [Page 12]


RFC 5264                  Partial Publication             September 2008


8.2.  Informative References

   [RFC2778]      Day, M., Rosenberg, J., and H. Sugano, "A Model for
                  Presence and Instant Messaging", RFC 2778,
                  February 2000.

   [RFC4479]      Rosenberg, J., "A Data Model for Presence", RFC 4479,
                  July 2006.

   [RFC4480]      Schulzrinne, H., Gurbani, V., Kyzivat, P., and J.
                  Rosenberg, "RPID: Rich Presence Extensions to the
                  Presence Information Data Format (PIDF)", RFC 4480,
                  July 2006.

   [RFC4481]      Schulzrinne, H., "Timed Presence Extensions to the
                  Presence Information Data Format (PIDF) to Indicate
                  Status Information for Past and Future Time
                  Intervals", RFC 4481, July 2006.

   [RFC4482]      Schulzrinne, H., "CIPID: Contact Information for the
                  Presence Information Data Format", RFC 4482,
                  July 2006.

   [RFC5196]      Lonnfors, M. and K. Kiss, "Session Initiation Protocol
                  (SIP) User Agent Capability Extension to Presence
                  Information Data Format (PIDF)", RFC 5196, September
                  2008.

   [W3C.REC-xml]  Bray, T., Paoli, J., Sperberg-McQueen, C., and E.
                  Maler, "Extensible Markup Language (XML) 1.0 (2nd
                  ed)", W3C REC-xml, October 2000,
                  <http://www.w3.org/TR/REC-xml>.



















Niemi, et al.               Standards Track                    [Page 13]


RFC 5264                  Partial Publication             September 2008


Authors' Addresses

   Aki Niemi
   Nokia
   P.O. Box 407
   NOKIA GROUP, FIN 00045
   Finland

   Phone: +358 71 8008000
   EMail: aki.niemi@nokia.com


   Mikko Lonnfors
   Nokia
   Itamerenkatu 11-13
   Helsinki
   Finland

   Phone: +358 71 8008000
   EMail: mikko.lonnfors@nokia.com


   Eva Leppanen
   Individual
   Lempaala
   Finland

   EMail: eva.leppanen@saunalahti.fi























Niemi, et al.               Standards Track                    [Page 14]


RFC 5264                  Partial Publication             September 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.












Niemi, et al.               Standards Track                    [Page 15]