RFC Errata


Errata Search

 
Source of RFC  
Summary Table Full Records

Found 3 records.

Status: Verified (3)

RFC 5812, "Forwarding and Control Element Separation (ForCES) Forwarding Element Model", March 2010

Source of RFC: forces (rtg)

Errata ID: 2576
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Jamal Hadi Salim
Date Reported: 2010-10-16
Verifier Name: Adrian Farrel
Date Verified: 2010-10-17

Section Table 1 says:

   |                |            |               |     information     |
   |   FE Protocol  |      2     |      [2]      |  Defines parameters |
   |     Object     |            |               |    for the ForCES   |
   |                |            |               |  protocol operation |


It should say:

   |                |            |               |     information     |
   |   FE Protocol  |      2     |    RFC 5810   |  Defines parameters |
   |     Object     |            |               |    for the ForCES   |
   |                |            |               |  protocol operation |


Notes:

Reference [2] used to be the reference to the I-D that became RFC 5810

Errata ID: 3371
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Evangelos Haleplidis
Date Reported: 2012-10-07
Verifier Name: Adrian Farrel
Date Verified: 2012-11-04

Throughout the document, when it says:

Page 65 Section 4.7.2 paragraph 1
<product> lists the allowed frame formats...

Page 95 Section 5.1
      <xsd:element name="frameProduced"> 

It should say:

Page 65 Section 4.7.2 paragraph 1
<product> MAY lists the allowed frame formats...

Page 65 Section 4.7.2 paragraph 1 additional text at end of paragraph
The <product> element MUST contain at least either a frame format or a metadata.

Page 95 Section 5.1
      <xsd:element name="frameProduced" minOccurs="0">

Notes:

Issue with frameProduced being mandatory for an output port.

Errata ID: 3487
Status: Verified
Type: Editorial
Publication Format(s) : TEXT

Reported By: Jamal Hadi Salim
Date Reported: 2013-02-18
Verifier Name: Adrian Farrel
Date Verified: 2013-02-19

Section 5.1 says:

                  <component access="read-only" componentID="7">
                    <name>FEState</name>
                    <synopsis>State of this FE</synopsis>
                    <typeRef>FEStateValues</typeRef>
                  </component>

It should say:

                  <component access="read-write" componentID="7">
                    <name>FEState</name>
                    <synopsis>State of this FE</synopsis>
                    <typeRef>FEStateValues</typeRef>
                  </component>

Notes:

FEObject FEState (component ID 7) is read-write. It was mistakenly
labelled read-only

Report New Errata