RFC 5404, "RTP Payload Format for G.719", January 2009

Errata ID: 3245
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Ravi Kumar
Date Reported: 2012-06-04
Verifier Name: Robert Sparks
Date Verified: 2012-06-07

Section 7.1 says:

7.1.  Media Type Definition

int-delay:  
         int-delay = "int-delay:" source-delay *("," source-delay)
         source-delay = SSRC ":" delay-value
         SSRC = 1*8HEXDIG ; The 32-bit SSRC encoded in hex format
         delay-value = 1*5DIGIT ; The delay value in milliseconds
 
         Example: int-delay=ABCD1234:1000,4321DCB:640
 
         NOTE: No white space allowed in the parameter before the end of
         all the value pairs

It should say:

         int-delay = "int-delay=" source-delay *("," source-delay)
         source-delay = SSRC ":" delay-value
         SSRC = 1*8HEXDIG ; The 32-bit SSRC encoded in hex format
         delay-value = 1*5DIGIT ; The delay value in milliseconds
 
         Example: int-delay=ABCD1234:1000,4321DCB:640
 
         NOTE: No white space allowed in the parameter before the end of
         all the value pairs

Notes:

int-delay ABNF does not match example mention in RFC.

"int-delay:" need to change to "int-delay="

7.2. Mapping to SDP
o Any remaining parameters go in the SDP "a=fmtp" attribute by
copying them directly from the media type parameter string as a
semicolon-separated list of parameter=value pairs.
As per section 7.2 int-delay parameter should be part of a=fmtp line and it should have parameter as parameter=value pair.

But as per ABNF it should be int-delay:<value>

Also example mentions that int-delay=<value>

Report New Errata