Found 1 record.

Status: Verified (1)

RFC 8060, "LISP Canonical Address Format (LCAF)", February 2017

Note: This RFC has been updated by RFC 9306

Errata ID: 7252
Status: Verified
Type: Technical
Publication Format(s) : TEXT
Reported By: Nikolai Malykh
Date Reported: 2022-11-16
Verifier Name: Alvaro Retana
Date Verified: 2023-02-08

Section 4.6 says:

   RLOC Probe bit (P):  this is the RLOC Probe bit that means the
      Reencap Hop allows RLOC-probe messages to be sent to it.  When the
      R bit is set to 0, RLOC-probes must not be sent.  When a Reencap
      Hop is an anycast address then multiple physical Reencap Hops are
      using the same RLOC address.  In this case, RLOC-probes are not
      needed because when the closest RLOC address is not reachable,
      another RLOC address can be reachable.

It should say:

   RLOC Probe bit (P):  this is the RLOC Probe bit that means the
      Reencap Hop allows RLOC-probe messages to be sent to it.  When the
      P bit is set to 0, RLOC-probes must not be sent.  When a Reencap
      Hop is an anycast address then multiple physical Reencap Hops are
      using the same RLOC address.  In this case, RLOC-probes are not
      needed because when the closest RLOC address is not reachable,
      another RLOC address can be reachable.

Notes:

The R bit is the Revoke bit (see Section 4.7)

Report New Errata