Found 1 record.
Status: Held for Document Update (1)
RFC 5412, "Lightweight Access Point Protocol", February 2010Source of RFC: INDEPENDENT
Errata ID: 4536
Status: Held for Document Update
Publication Format(s) : TEXT
Reported By: Tony Deng
Date Reported: 2015-11-18
Held for Document Update by: Nevil Brownlee
Date Held: 2017-07-20
Section 7.2.3 says:
The AC Name with Index message element is sent by the AC to the WTP to configure preferred ACs. The number of instances where this message element would be present is equal to the number of ACs configured on the WTP. 0 1 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Index | AC Name... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Type: 90 for AC Name with Index Length: 5 Index: The index of the preferred server (e.g., 1=primary, 2=secondary). AC Name: A variable-length ASCII string containing the AC's name.
This entire section is in the wrong location or needs to be revised. Section 7.2 is the definition for Configure Request, which is suppose to be a message sent from the WTP to the AC. But here at 7.2.3, this message element clearly states it is an element to be sent from the AC to the WTP. Does this section belong in the Configure Response section instead?
[This section does seem to be in the wrong place. However, moving it will need to wait fo a new (revised) RFC. ISE, July 2017]