This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 5683
Internet Engineering Task Force (IETF)                         J. Lennox
Request for Comments: 8122                                         Vidyo
Obsoletes: 4572                                              C. Holmberg
Category: Standards Track                                       Ericsson
ISSN: 2070-1721                                               March 2017


                Connection-Oriented Media Transport over
              the Transport Layer Security (TLS) Protocol
               in the Session Description Protocol (SDP)

Abstract

   This document specifies how to establish secure connection-oriented
   media transport sessions over the Transport Layer Security (TLS)
   protocol using the Session Description Protocol (SDP).  It defines
   the SDP protocol identifier, 'TCP/TLS'.  It also defines the syntax
   and semantics for an SDP 'fingerprint' attribute that identifies the
   certificate that will be presented for the TLS session.  This
   mechanism allows media transport over TLS connections to be
   established securely, so long as the integrity of session
   descriptions is assured.

   This document obsoletes RFC 4572 by clarifying the usage of multiple
   fingerprints.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc8122.

Copyright Notice

   Copyright (c) 2017 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Changes from RFC 4572 . . . . . . . . . . . . . . . . . .   4
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  Overview  . . . . . . . . . . . . . . . . . . . . . . . . . .   4
     3.1.  SDP Operational Modes . . . . . . . . . . . . . . . . . .   4
     3.2.  Threat Model  . . . . . . . . . . . . . . . . . . . . . .   5
     3.3.  The Need for Self-Signed Certificates . . . . . . . . . .   6
     3.4.  Example SDP Description for TLS Connection  . . . . . . .   6
   4.  Protocol Identifiers  . . . . . . . . . . . . . . . . . . . .   7
   5.  Fingerprint Attribute . . . . . . . . . . . . . . . . . . . .   7
     5.1.  Multiple Fingerprints . . . . . . . . . . . . . . . . . .   9
   6.  Endpoint Identification . . . . . . . . . . . . . . . . . . .  10
     6.1.  Certificate Choice  . . . . . . . . . . . . . . . . . . .  10
     6.2.  Certificate Presentation  . . . . . . . . . . . . . . . .  11
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  12
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  14
   9.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  15
     9.1.  Normative References  . . . . . . . . . . . . . . . . . .  15
     9.2.  Informative References  . . . . . . . . . . . . . . . . .  16
   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .  18
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  18

1.  Introduction

   The Session Description Protocol (SDP) [8] provides a general-purpose
   format for describing multimedia sessions in announcements or
   invitations.  For many applications, it is desirable to establish, as
   part of a multimedia session, a media stream that uses a connection-
   oriented transport.  RFC 4145, "TCP-Based Media Transport in the
   Session Description Protocol (SDP)" [7], specifies a general
   mechanism for describing and establishing such connection-oriented
   streams; however, the only transport protocol it directly supports is
   TCP.  In many cases, session participants wish to provide
   confidentiality, data integrity, and authentication for their media
   sessions.  Therefore, this document extends the TCP-Based Media
   specification to allow session descriptions to describe media
   sessions that use the Transport Layer Security (TLS) protocol [10].

   The TLS protocol allows applications to communicate over a channel
   that provides confidentiality and data integrity.  The TLS
   specification, however, does not specify how specific protocols
   establish and use this secure channel; particularly, TLS leaves the
   question of how to interpret and validate authentication certificates
   as an issue for the protocols that run over TLS.  This document
   specifies such usage for the case of connection-oriented media
   transport.

   Complicating this issue, endpoints exchanging media will often be
   unable to obtain authentication certificates signed by a well-known
   root certification authority (CA).  Most certificate authorities
   charge for signed certificates, particularly host-based certificates;
   additionally, there is a substantial administrative overhead to
   obtaining signed certificates, as certification authorities must be
   able to confirm that they are issuing the signed certificates to the
   correct party.  Furthermore, in many cases the endpoints' IP
   addresses and host names are dynamic, for example, they may be
   obtained from DHCP.  It is impractical to obtain a CA-signed
   certificate valid for the duration of a DHCP lease.  For such hosts,
   self-signed certificates are usually the only option.  This
   specification defines a mechanism that allows self-signed
   certificates to be used securely, provided that the integrity of the
   SDP description is assured.  It allows for endpoints to include a
   secure hash of their certificate, known as the "certificate
   fingerprint", within the session description.  Provided that the
   fingerprint of the offered certificate matches the one in the session
   description, end hosts can trust even self-signed certificates.

   The rest of this document is laid out as follows.  An overview of the
   problem and threat model is given in Section 3.  Section 4 gives the
   basic mechanism for establishing TLS-based connected-oriented media
   in SDP.  Section 5 describes the SDP fingerprint attribute, which,
   assuming that the integrity of the SDP content is assured, allows the
   secure use of self-signed certificates.  Section 6 describes which
   X.509 certificates are presented and how they are used in TLS.
   Section 7 discusses additional security considerations.

1.1.  Changes from RFC 4572

   This document obsoletes RFC 4572 [20] but remains backwards
   compatible with older implementations.  The changes from RFC 4572
   [20] are as follows:

   o  clarifies that multiple 'fingerprint' attributes can be used to
      carry fingerprints (calculated using different hash functions)
      associated with a given certificate and to carry fingerprints
      associated with multiple certificates.

   o  clarifies the fingerprint matching procedure when multiple
      fingerprints are provided.

   o  updates the preferred hash function with a stronger cipher suite
      and removes the requirement to use the same hash function for
      calculating a certificate fingerprint and certificate signature.

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [3].

3.  Overview

   This section discusses the threat model that motivates TLS transport
   for connection-oriented media streams.  It also discusses, in more
   detail, the need for end systems to use self-signed certificates.

3.1.  SDP Operational Modes

   There are two principal operational modes for multimedia sessions:
   advertised and offer-answer.  Advertised sessions are the simpler
   mode.  In this mode, a server publishes, in some manner, an SDP
   session description of a multimedia session it is making available.
   The classic example of this mode of operation is the Session
   Announcement Protocol (SAP) [15], in which SDP session descriptions
   are periodically transmitted to a well-known multicast group.

   Traditionally, these descriptions involve multicast conferences, but
   unicast sessions are also possible.  (Obviously, connection-oriented
   media cannot use multicast.)  Recipients of a session description
   connect to the addresses published in the session description.  These
   recipients may not have been previously known to the advertiser of
   the session description.

   Alternatively, SDP conferences can operate in offer-answer mode [4].
   This mode allows two participants in a multimedia session to
   negotiate the multimedia session between them.  In this model, one
   participant offers the other a description of the desired session
   from its perspective, and the other participant answers with the
   desired session from its own perspective.  In this mode, each of the
   participants in the session has knowledge of the other one.  This is
   the mode of operation used by the Session Initiation Protocol (SIP)
   [17].

3.2.  Threat Model

   Participants in multimedia conferences often wish to guarantee
   confidentiality, data integrity, and authentication for their media
   sessions.  This section describes various types of attackers and the
   ways they attempt to violate these guarantees.  It then describes how
   the TLS protocol can be used to thwart the attackers.

   The simplest type of attacker is one who listens passively to the
   traffic associated with a multimedia session.  This attacker might,
   for example, be on the same local-area or wireless network as one of
   the participants in a conference.  This sort of attacker does not
   threaten a connection's data integrity or authentication, and almost
   any operational mode of TLS can provide media-stream confidentiality.

   More sophisticated is an attacker who can send his own data traffic
   over the network, but who cannot modify or redirect valid traffic.
   In SDP's 'advertised' operational mode, this can barely be considered
   an attack; media sessions are expected to be initiated from anywhere
   on the network.  In SDP's offer-answer mode, however, this type of
   attack is more serious.  An attacker could initiate a connection to
   one or both of the endpoints of a session, thus impersonating an
   endpoint or acting as a man in the middle to listen in on their
   communications.  To thwart these attacks, TLS uses endpoint
   certificates.  So long as the certificates' private keys have not
   been compromised, the endpoints have an externally trusted mechanism
   (most commonly, a mutually trusted certification authority) to
   validate certificates.  Because the endpoints know what certificate
   identity to expect, endpoints can be certain that such an attack has
   not taken place.

   Finally, the most serious type of attacker is one who can modify or
   redirect session descriptions: for example, a compromised or
   malicious SIP proxy server.  Neither TLS itself nor any mechanisms
   that use it can protect an SDP session against such an attacker.
   Instead, the SDP description itself must be secured through some
   mechanism; SIP, for example, defines how S/MIME [22] can be used to
   secure session descriptions.

3.3.  The Need for Self-Signed Certificates

   SDP session descriptions are created by any endpoint that needs to
   participate in a multimedia session.  In many cases, such as SIP
   phones, such endpoints have dynamically configured IP addresses and
   host names and must be deployed with nearly zero configuration.  For
   such an endpoint, it is, for practical purposes, impossible to obtain
   a certificate signed by a well-known certification authority.

   If two endpoints have no prior relationship, self-signed certificates
   cannot generally be trusted, as there is no guarantee that an
   attacker is not launching a man-in-the-middle attack.  Fortunately,
   however, if the integrity of SDP session descriptions can be assured,
   it is possible to consider those SDP descriptions themselves as a
   prior relationship: certificates can be securely described in the
   session description itself.  This is done by providing a secure hash
   of a certificate, or "certificate fingerprint", as an SDP attribute;
   this mechanism is described in Section 5.

3.4.  Example SDP Description for TLS Connection

   Figure 1 illustrates an SDP offer that signals the availability of a
   T.38 fax session over TLS.  For the purpose of brevity, the main
   portion of the session description is omitted in the example, showing
   only the 'm' line and its attributes.  (This example is the same as
   the first one in RFC 4145 [7], except for the proto parameter and the
   fingerprint attribute.)  See the subsequent sections for explanations
   of the example's TLS-specific attributes.

   Note: due to RFC formatting conventions, this document splits SDP
   across lines whose content would exceed 72 characters.  A backslash
   character marks where this line folding has taken place.  This
   backslash and its trailing CRLF and whitespace would not appear in
   actual SDP content.

 m=image 54111 TCP/TLS t38
 c=IN IP4 192.0.2.2
 a=setup:passive
 a=connection:new
 a=fingerprint:SHA-256 \
    12:DF:3E:5D:49:6B:19:E5:7C:AB:4A:AD:B9:B1:3F:82:18:3B:54:02:12:DF: \
    3E:5D:49:6B:19:E5:7C:AB:4A:AD
 a=fingerprint:SHA-1 \
    4A:AD:B9:B1:3F:82:18:3B:54:02:12:DF:3E:5D:49:6B:19:E5:7C:AB

   Figure 1: Example SDP Description Offering a TLS Media Stream

4.  Protocol Identifiers

   The 'm' line in SDP specifies, among other items, the transport
   protocol to be used for the media in the session.  See the "Media
   Descriptions" section of SDP [8] for a discussion on transport
   protocol identifiers.

   This specification defines the protocol identifier, 'TCP/TLS', which
   indicates that the media described will use the Transport Layer
   Security protocol [10] over TCP.  (Using TLS over other transport
   protocols is not discussed in this document.)  The 'TCP/TLS' protocol
   identifier describes only the transport protocol, not the upper-layer
   protocol.  An 'm' line that specifies 'TCP/TLS' MUST further qualify
   the protocol using an fmt identifier to indicate the application
   being run over TLS.

   Media sessions described with this identifier follow the procedures
   defined in RFC 4145 [7].  They also use the SDP attributes defined in
   that specification, 'setup' and 'connection'.

5.  Fingerprint Attribute

   Parties to a TLS session indicate their identities by presenting
   authentication certificates as part of the TLS handshake procedure.
   Authentication certificates are X.509 [2] certificates, as profiled
   by RFCs 3279 [5], 5280 [11], and 4055 [6].

   In order to associate media streams with connections and to prevent
   unauthorized barge-in attacks on the media streams, endpoints MUST
   provide a certificate fingerprint.  If the X.509 certificate
   presented for the TLS connection matches the fingerprint presented in
   the SDP, the endpoint can be confident that the author of the SDP is
   indeed the initiator of the connection.

   A certificate fingerprint is a secure one-way hash of the
   Distinguished Encoding Rules (DER) form of the certificate.
   (Certificate fingerprints are widely supported by tools that
   manipulate X.509 certificates; for instance, the command "openssl
   x509 -fingerprint" causes the command-line tool of the openssl
   package to print a certificate fingerprint, and the certificate
   managers for Mozilla and Internet Explorer display them when viewing
   the details of a certificate.)

   A fingerprint is represented in SDP as an attribute (an 'a' line).
   It consists of the name of the hash function used, followed by the
   hash value itself.  The hash value is represented as a sequence of
   uppercase hexadecimal bytes, separated by colons.  The number of
   bytes is defined by the hash function.  (This is the syntax used by
   openssl and by the browsers' certificate managers.  It is different
   from the syntax used to represent hash values in, for example, HTTP
   digest authentication [24], which uses unseparated lowercase
   hexadecimal bytes.  Consistency with other applications of
   fingerprints was considered more important.)

   The formal syntax of the fingerprint attribute is given in Augmented
   Backus-Naur Form [9] in Figure 2.  This syntax extends the BNF syntax
   of SDP [8].

   attribute              =/ fingerprint-attribute

   fingerprint-attribute  =  "fingerprint" ":" hash-func SP fingerprint

   hash-func              =  "sha-1" / "sha-224" / "sha-256" /
                             "sha-384" / "sha-512" /
                             "md5" / "md2" / token
                             ; Additional hash functions can only come
                             ; from updates to RFC 3279

   fingerprint            =  2UHEX *(":" 2UHEX)
                             ; Each byte in upper-case hex, separated
                             ; by colons.

   UHEX                   =  DIGIT / %x41-46 ; A-F uppercase

   Figure 2: Augmented Backus-Naur Syntax for the Fingerprint Attribute

   Following RFC 3279 [5] as updated by RFC 4055 [6], the defined hash
   functions are 'SHA-1' [1] [16], 'SHA-224' [1], 'SHA-256' [1], 'SHA-
   384' [1], 'SHA-512' [1], 'MD5' [13], and 'MD2' [23], with 'SHA-256'
   preferred.  A new IANA registry, named "Hash Function Textual Names",
   specified in Section 8, allows for the addition of future tokens, but
   they may only be added if they are included in RFCs that update or
   obsolete RFC 3279 [5].

   Implementations compliant with this specification MUST NOT use the
   MD2 and MD5 hash functions to calculate fingerprints or to verify
   received fingerprints that have been calculated using them.

   Note: The MD2 and MD5 hash functions are listed in this specification
   so that implementations can recognize them.  Implementations that log
   unused hash functions might log occurrences of these algorithms
   differently to unknown hash algorithms.

   The fingerprint attribute may be either a session-level or a media-
   level SDP attribute.  If it is a session-level attribute, it applies
   to all TLS sessions for which no media-level fingerprint attribute is
   defined.

5.1.  Multiple Fingerprints

   Multiple SDP fingerprint attributes can be associated with an 'm'
   line.  This can occur if multiple fingerprints have been calculated
   for a certificate using different hash functions.  It can also occur
   if one or more fingerprints associated with multiple certificates
   have been calculated.  This might be needed if multiple certificates
   will be used for media associated with an 'm' line (e.g., if separate
   certificates are used for RTP and the RTP Control Protocol (RTCP)) or
   where it is not known which certificate will be used when the
   fingerprints are exchanged.  In such cases, one or more fingerprints
   MUST be calculated for each possible certificate.

   An endpoint MUST, as a minimum, calculate a fingerprint using both
   the 'SHA-256' hash function algorithm and the hash function used to
   generate the signature on the certificate for each possible
   certificate.  Including the hash from the signature algorithm ensures
   interoperability with strict implementations of RFC 4572 [20].
   Either of these fingerprints MAY be omitted if the endpoint includes
   a hash with a stronger hash algorithm that it knows that the peer
   supports, if it is known that the peer does not support the hash
   algorithm, or if local policy mandates use of stronger algorithms.

   If fingerprints associated with multiple certificates are calculated,
   the same set of hash functions MUST be used to calculate fingerprints
   for each certificate associated with the 'm' line.

   An endpoint MUST select the set of fingerprints that use its most
   preferred hash function (out of those offered by the peer) and verify
   that each certificate used matches one fingerprint out of that set.

   If a certificate does not match any such fingerprint, the endpoint
   MUST NOT establish the TLS connection.

   Note: The SDP fingerprint attribute does not contain a reference to a
   specific certificate.  Endpoints need to compare the fingerprint with
   a certificate hash in order to look for a match.

6.  Endpoint Identification

6.1.  Certificate Choice

   An X.509 certificate binds an identity and a public key.  If SDP
   describing a TLS session is transmitted over a mechanism that
   provides integrity protection, a certificate asserting any
   syntactically valid identity MAY be used.  For example, an SDP
   description sent over HTTP/TLS [14] or secured by S/MIME [22] MAY
   assert any identity in the certificate securing the media connection.

   Security protocols that provide only hop-by-hop integrity protection
   (e.g., the SIPS scheme [17], SIP over TLS) are considered
   sufficiently secure to allow the mode in which any valid identity is
   accepted.  However, see Section 7 for a discussion of some security
   implications of this fact.

   In situations where the SDP is not integrity-protected, the
   certificate provided for a TLS connection MUST certify an appropriate
   identity for the connection.  In these scenarios, the certificate
   presented by an endpoint MUST certify either the SDP connection
   address or the identity of the creator of the SDP message, as
   follows:

   o  If the connection address for the media description is specified
      as an IP address, the endpoint MAY use a certificate with an
      iPAddress subjectAltName that exactly matches the IP in the
      connection-address in the session description's 'c' line.
      Similarly, if the connection address for the media description is
      specified as a fully qualified domain name, the endpoint MAY use a
      certificate with a dNSName subjectAltName matching the specified
      'c' line connection-address exactly.  (Wildcard patterns MUST NOT
      be used.)

   o  Alternately, if the SDP session description of the session was
      transmitted over a protocol (such as SIP [17]) for which the
      identities of session participants are defined by Uniform Resource
      Identifiers (URIs), the endpoint MAY use a certificate with a
      uniformResourceIdentifier subjectAltName corresponding to the
      identity of the endpoint that generated the SDP.  The details of

      what URIs are valid are dependent on the transmitting protocol.
      (For more details on the validity of URIs, see Section 7.

   Identity matching is performed using the matching rules specified by
   RFC 5280 [11].  If more than one identity of a given type is present
   in the certificate (e.g., more than one dNSName name), a match in any
   one of the set is considered acceptable.  To support the use of
   certificate caches, as described in Section 7, endpoints SHOULD
   consistently provide the same certificate for each identity they
   support.

6.2.  Certificate Presentation

   In all cases, an endpoint acting as the TLS server (i.e., one taking
   the 'setup:passive' role, in the terminology of connection-oriented
   media) MUST present a certificate during TLS initiation, following
   the rules presented in Section 6.1.  If the certificate does not
   match the original fingerprint, the client endpoint MUST terminate
   the media connection with a bad_certificate error.

   If the SDP offer/answer model [4] is being used, the client (the
   endpoint with the 'setup:active' role) MUST also present a
   certificate following the rules of Section 6.1.  The server MUST
   request a certificate; if the client does not provide one, or if the
   certificate does not match a provided fingerprint, the server
   endpoint MUST terminate the media connection with a bad_certificate
   error.

   Note that when the offer/answer model is being used, it is possible
   for a media connection to outrace the answer back to the offerer.
   Thus, if the offerer has offered a 'setup:passive' or 'setup:actpass'
   role, it MUST (as specified in RFC 4145 [7]) begin listening for an
   incoming connection as soon as it sends its offer.  However, it MUST
   NOT assume that the data transmitted over the TLS connection is valid
   until it has received a matching fingerprint in an SDP answer.  If
   the fingerprint, once it arrives, does not match the client's
   certificate, the server endpoint MUST terminate the media connection
   with a bad_certificate error, as stated in the previous paragraph.

   If offer/answer is not being used (e.g., if the SDP was sent over the
   Session Announcement Protocol [15]), there is no secure channel
   available for clients to communicate certificate fingerprints to
   servers.  In this case, servers MAY request client certificates,
   which SHOULD be signed by a well-known certification authority, or
   MAY allow clients to connect without a certificate.

7.  Security Considerations

   This entire document concerns itself with security.  The problem to
   be solved is addressed in Section 1, and a high-level overview is
   presented in Section 3.  See the SDP specification [8] for security
   considerations applicable to SDP in general.

   Offering a TCP/TLS connection in SDP (or agreeing to one in the SDP
   offer/answer mode) does not create an obligation for an endpoint to
   accept any TLS connection with the given fingerprint.  Instead, the
   endpoint must engage in the standard TLS negotiation procedure to
   ensure that the TLS stream cipher and MAC algorithm chosen meet the
   security needs of the higher-level application.  (For example, an
   offered stream cipher of TLS_NULL_WITH_NULL_NULL SHOULD be rejected
   in almost every application scenario.)

   Like all SDP messages, SDP messages describing TLS streams are
   conveyed in an encapsulating application protocol (e.g., SIP, Media
   Gateway Control Protocol (MGCP), etc.).  It is the responsibility of
   the encapsulating protocol to ensure the integrity of the SDP
   security descriptions.  Therefore, the application protocol SHOULD
   either invoke its own security mechanisms (e.g., secure multiparts)
   or, alternatively, utilize a lower-layer security service (e.g., TLS
   or IPsec).  This security service SHOULD provide strong message
   authentication as well as effective replay protection.

   However, such integrity protection is not always possible.  For these
   cases, end systems SHOULD maintain a cache of certificates that other
   parties have previously presented using this mechanism.  If possible,
   users SHOULD be notified when an unsecured certificate associated
   with a previously unknown end system is presented and SHOULD be
   strongly warned if a different unsecured certificate is presented by
   a party with which they have communicated in the past.  In this way,
   even in the absence of integrity protection for SDP, the security of
   this document's mechanism is equivalent to that of the Secure Shell
   (SSH) protocol [18], which is vulnerable to man-in-the-middle attacks
   when two parties first communicate but can detect ones that occur
   subsequently.  (Note that a precise definition of the "other party"
   depends on the application protocol carrying the SDP message.)  Users
   SHOULD NOT, however, in any circumstances be notified about
   certificates described in the SDP descriptions sent over an
   integrity-protected channel.

   To aid interoperability and deployment, security protocols that
   provide only hop-by-hop integrity protection (e.g., the SIPS scheme
   [17], SIP over TLS) are considered sufficiently secure to allow the
   mode in which any syntactically valid identity is accepted in a
   certificate.  This decision was made because SIPS is currently the

   integrity mechanism most likely to be used in deployed networks in
   the short to medium term.  However, in this mode, SDP integrity is
   vulnerable to attacks by compromised or malicious middleboxes, e.g.,
   SIP proxy servers.  End systems MAY warn users about SDP sessions
   that are secured in only a hop-by-hop manner, and definitions of
   media formats running over TCP/TLS MAY specify that only end-to-end
   integrity mechanisms be used.

   Depending on how SDP messages are transmitted, it is not always
   possible to determine whether or not a subjectAltName presented in a
   remote certificate is expected for the remote party.  In particular,
   given call forwarding, third-party call control, or session
   descriptions generated by endpoints controlled by the Gateway Control
   Protocol [21], it is not always possible in SIP to determine what
   entity ought to have generated a remote SDP response.  In general,
   when not using authenticity and integrity protection of the SDP
   descriptions, a certificate transmitted over SIP SHOULD assert the
   endpoint's SIP Address of Record as a uniformResourceIndicator
   subjectAltName.  When an endpoint receives a certificate over SIP
   asserting an identity (including an iPAddress or dNSName identity)
   other than the one to which it placed or received the call, it SHOULD
   alert the user and ask for confirmation.  This applies whether
   certificates are self-signed or signed by certification authorities;
   a certificate for "sip:bob@example.com" may be legitimately signed by
   a certification authority, but it may still not be acceptable for a
   call to "sip:alice@example.com".  (This issue is not one specific to
   this specification; the same consideration applies for S/MIME-signed
   SDP carried over SIP.)

   This document does not define a mechanism for securely transporting
   RTP and RTCP packets over a connection-oriented channel.  Please see
   RFC 7850 [19] for more details.

   TLS is not always the most appropriate choice for secure connection-
   oriented media; in some cases, a higher- or lower-level security
   protocol may be appropriate.

   This document improves security from RFC 4572 [20].  It updates the
   preferred hash function from SHA-1 to SHA-256 and deprecates the
   usage of the MD2 and MD5 hash functions.

   By clarifying the usage and handling of multiple fingerprints, the
   document also enables hash agility and incremental deployment of
   newer and more secure hash functions.

8.  IANA Considerations

   IANA has updated the registrations defined in RFC 4572 [20] to refer
   to this specification.

   This document defines an SDP proto value: 'TCP/TLS'.  Its format is
   defined in Section 4.  This proto value has been registered by IANA
   under the "proto" registry within the "Session Description Protocol
   (SDP) Parameters" registry.

   This document defines an SDP session and media-level attribute:
   'fingerprint'.  Its format is defined in Section 5.  This attribute
   has been registered by IANA under the "att-field (both session and
   media level)" registry within the "Session Description Protocol (SDP)
   Parameters" registry.

   The SDP specification [8] states that specifications defining new
   proto values, like the 'TCP/TLS' proto value defined in this one,
   must define the rules by which their media format (fmt) namespace is
   managed.  For the TCP/TLS protocol, new formats SHOULD have an
   associated MIME registration.  Use of an existing MIME subtype for
   the format is encouraged.  If no MIME subtype exists, it is
   RECOMMENDED that a suitable one be registered through the IETF
   process [12] by production of, or reference to, a Standards Track RFC
   that defines the transport protocol for the format.

   IANA has updated the "Hash Function Textual Names" registry (which
   was originally created in [20]) to refer to this document.

   The names of hash functions used for certificate fingerprints are
   registered by the IANA.  Hash functions MUST be defined by Standards
   Track RFCs that update or obsolete RFC 3279 [5].

   When registering a new hash function textual name, the following
   information MUST be provided:

   o  The textual name of the hash function.

   o  The Object Identifier (OID) of the hash function as used in X.509
      certificates.

   o  A reference to the Standards Track RFC that updates or obsoletes
      RFC 3279 [5] and defines the use of the hash function in X.509
      certificates.

   Table 1 contains the initial values of this registry.

        +--------------------+------------------------+-----------+
        | Hash Function Name |          OID           | Reference |
        +--------------------+------------------------+-----------+
        |       "md2"        |   1.2.840.113549.2.2   |  RFC 3279 |
        |       "md5"        |   1.2.840.113549.2.5   |  RFC 3279 |
        |      "sha-1"       |     1.3.14.3.2.26      |  RFC 3279 |
        |     "sha-224"      | 2.16.840.1.101.3.4.2.4 |  RFC 4055 |
        |     "sha-256"      | 2.16.840.1.101.3.4.2.1 |  RFC 4055 |
        |     "sha-384"      | 2.16.840.1.101.3.4.2.2 |  RFC 4055 |
        |     "sha-512"      | 2.16.840.1.101.3.4.2.3 |  RFC 4055 |
        +--------------------+------------------------+-----------+

                          Table 1: IANA "Hash Function Textual Names" Registry 

EID 5683 (Verified) is as follows:

Section: 8

Original Text:

             Table 1: IANA Hash Function Textual Name Registry

Corrected Text:

             Table 1: IANA "Hash Function Textual Names" Registry
Notes:
The name of the registry is the "Hash Function Textual Names" registry.
9. References 9.1. Normative References [1] National Institute of Standards and Technology, "Secure Hash Standard (SHS)", FIPS PUB 180-4, DOI 10.6028/NIST.FIPS.180-4, August 2015, <http://nvlpubs.nist.gov/nistpubs/FIPS/ NIST.FIPS.180-4.pdf>. [2] International Organization for Standardization, "Information technology -- Open Systems Interconnection -- The Directory -- Part 8: Public-key and attribute certificate frameworks", ISO/IEC 9594-8:2014, March 2014, <https://www.iso.org/standard/64854.html>. [3] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [4] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model with Session Description Protocol (SDP)", RFC 3264, DOI 10.17487/RFC3264, June 2002, <http://www.rfc-editor.org/info/rfc3264>. [5] Bassham, L., Polk, W., and R. Housley, "Algorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 3279, DOI 10.17487/RFC3279, April 2002, <http://www.rfc-editor.org/info/rfc3279>. [6] Schaad, J., Kaliski, B., and R. Housley, "Additional Algorithms and Identifiers for RSA Cryptography for use in the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 4055, DOI 10.17487/RFC4055, June 2005, <http://www.rfc-editor.org/info/rfc4055>. [7] Yon, D. and G. Camarillo, "TCP-Based Media Transport in the Session Description Protocol (SDP)", RFC 4145, DOI 10.17487/RFC4145, September 2005, <http://www.rfc-editor.org/info/rfc4145>. [8] Handley, M., Jacobson, V., and C. Perkins, "SDP: Session Description Protocol", RFC 4566, DOI 10.17487/RFC4566, July 2006, <http://www.rfc-editor.org/info/rfc4566>. [9] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, <http://www.rfc-editor.org/info/rfc5234>. [10] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, <http://www.rfc-editor.org/info/rfc5246>. [11] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008, <http://www.rfc-editor.org/info/rfc5280>. [12] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, DOI 10.17487/RFC6838, January 2013, <http://www.rfc-editor.org/info/rfc6838>. 9.2. Informative References [13] Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321, DOI 10.17487/RFC1321, April 1992, <http://www.rfc-editor.org/info/rfc1321>. [14] Rescorla, E., "HTTP Over TLS", RFC 2818, DOI 10.17487/RFC2818, May 2000, <http://www.rfc-editor.org/info/rfc2818>. [15] Handley, M., Perkins, C., and E. Whelan, "Session Announcement Protocol", RFC 2974, DOI 10.17487/RFC2974, October 2000, <http://www.rfc-editor.org/info/rfc2974>. [16] Eastlake 3rd, D. and P. Jones, "US Secure Hash Algorithm 1 (SHA1)", RFC 3174, DOI 10.17487/RFC3174, September 2001, <http://www.rfc-editor.org/info/rfc3174>. [17] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol", RFC 3261, DOI 10.17487/RFC3261, June 2002, <http://www.rfc-editor.org/info/rfc3261>. [18] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH) Protocol Architecture", RFC 4251, DOI 10.17487/RFC4251, January 2006, <http://www.rfc-editor.org/info/rfc4251>. [19] Lazzaro, J., "Framing Real-time Transport Protocol (RTP) and RTP Control Protocol (RTCP) Packets over Connection-Oriented Transport", RFC 4571, DOI 10.17487/RFC4571, July 2006, <http://www.rfc-editor.org/info/rfc4571>. [20] Lennox, J., "Connection-Oriented Media Transport over the Transport Layer Security (TLS) Protocol in the Session Description Protocol (SDP)", RFC 4572, DOI 10.17487/RFC4572, July 2006, <http://www.rfc-editor.org/info/rfc4572>. [21] Taylor, T., "Reclassification of RFC 3525 to Historic", RFC 5125, DOI 10.17487/RFC5125, February 2008, <http://www.rfc-editor.org/info/rfc5125>. [22] Ramsdell, B. and S. Turner, "Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.2 Message Specification", RFC 5751, DOI 10.17487/RFC5751, January 2010, <http://www.rfc-editor.org/info/rfc5751>. [23] Turner, S. and L. Chen, "MD2 to Historic Status", RFC 6149, DOI 10.17487/RFC6149, March 2011, <http://www.rfc-editor.org/info/rfc6149>. [24] Shekh-Yusef, R., Ed., Ahrens, D., and S. Bremer, "HTTP Digest Access Authentication", RFC 7616, DOI 10.17487/RFC7616, September 2015, <http://www.rfc-editor.org/info/rfc7616>. Acknowledgments This document included significant contributions by Cullen Jennings, Paul Kyzivat, Roman Shpount, and Martin Thomson. Elwyn Davies performed the Gen-ART review of the document. Authors' Addresses Jonathan Lennox Vidyo Email: jonathan@vidyo.com Christer Holmberg Ericsson Email: christer.holmberg@ericsson.com