This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 192
Network Working Group                                          D. Pinkas
Request for Comments: 4043                                          Bull
Category: Standards Track                                      T. Gindin
                                                                     IBM
                                                                May 2005


                Internet X.509 Public Key Infrastructure
                          Permanent Identifier

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This document defines a new form of name, called permanent
   identifier, that may be included in the subjectAltName extension of a
   public key certificate issued to an entity.

   The permanent identifier is an optional feature that may be used by a
   CA to indicate that two or more certificates relate to the same
   entity, even if they contain different subject name (DNs) or
   different names in the subjectAltName extension, or if the name or
   the affiliation of that entity stored in the subject or another name
   form in the subjectAltName extension has changed.

   The subject name, carried in the subject field, is only unique for
   each subject entity certified by the one CA as defined by the issuer
   name field.  However, the new name form can carry a name that is
   unique for each subject entity certified by a CA.

Table of Contents

   1.  Introduction..................................................  2
   2.  Definition of a Permanent Identifier..........................  3
   3.  IANA Considerations...........................................  6
   4.  Security Considerations.......................................  6
   5.  References....................................................  7
       5.1.  Normative References....................................  7
       5.2.  Informative References..................................  8
   Appendix A. ASN.1 Syntax..........................................  9
       A.1.  1988 ASN.1 Module.......................................  9
       A.2.  1993 ASN.1 Module....................................... 10
   Appendix B. OID's for organizations............................... 11
       B.1.  Using IANA (Internet Assigned Numbers Authority)........ 11
       B.2.  Using an ISO Member Body................................ 12
       B.3.  Using an ICD (International Code Designator) From
             British Standards Institution to Specify a New or
             an Existing Identification Scheme....................... 12
   Authors' Addresses................................................ 14
   Full Copyright Statement.......................................... 15

1.  Introduction

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   This specification is based on [RFC3280], which defines underlying
   certificate formats and semantics needed for a full implementation of
   this standard.

   The subject field of a public key certificate identifies the entity
   associated with the public key stored in the subject public key
   field.  Names and identities of a subject may be carried in the
   subject field and/or the subjectAltName extension.  Where subject
   field is non-empty, it MUST contain an X.500 distinguished name (DN).
   The DN MUST be unique for each subject entity certified by a single
   CA as defined by the issuer name field.

   The subject name changes whenever any of the components of that name
   gets changed.  There are several reasons for such a change to happen.

      For employees of a company or organization, the person may get a
      different position within the same company and thus will move from
      one organization unit to another one.  Including the organization
      unit in the name may however be very useful to allow the relying
      parties (RP's) using that certificate to identify the right
      individual.

      For citizens, an individual may change their name by legal
      processes, especially as a result of marriage.

      Any certificate subject identified by geographical location may
      relocate and change at least some of the location attributes
      (e.g., country name, state or province, locality, or street).

   A permanent identifier consists of an identifier value assigned
   within a given naming space by the organization which is
   authoritative for that naming space.  The organization assigning the
   identifier value may be the CA that has issued the certificate or a
   different organization called an Assigner Authority.

   An Assigner Authority may be a government, a government agency, a
   corporation, or any other sort of organization.  It MUST have a
   unique identifier to distinguish it from any other such authority.
   In this standard, that identifier MUST be an object identifier.

   A permanent identifier may be useful in three contexts: access
   control, non-repudiation and audit records.

      For access control, the permanent identifier may be used in an ACL
      (Access Control List) instead of the DN or any other form of name
      and would not need to be changed, even if the subject name of the
      entity changes.  For non-repudiation, the permanent identifier may
      be used to link different transactions to the same entity, even
      when the subject name of the entity changes.

      For audit records, the permanent identifier may be used to link
      different audit records to the same entity, even when the subject
      name of the entity changes.

   For two certificates which have been both verified to be valid
   according to a given validation policy and which contain a permanent
   identifier, those certificates relate to the same entity if their
   permanent identifiers match, whatever the content of the DN or other
   subjectAltName components may be.

   Since the use of permanent identifiers may conflict with privacy, CAs
   SHOULD advertise to purchasers of certificates the use of permanent
   identifiers in certificates.

2.  Definition of a Permanent Identifier

   This Permanent Identifier is a name defined as a form of otherName
   from the GeneralName structure in SubjectAltName, as defined in
   [X.509] and [RFC3280].

   A CA which includes a permanent identifier in a certificate is
   certifying that any public key certificate containing the same values
   for that identifier refers to the same entity.

   The use of a permanent identifier is OPTIONAL.  The permanent
   identifier is defined as follows:

      id-on-permanentIdentifier   OBJECT IDENTIFIER ::= { id-on 3 }
        PermanentIdentifier ::=     SEQUENCE {
           identifierValue    UTF8String             OPTIONAL,
                           -- if absent, use a serialNumber attribute,
                           -- if there is such an attribute present
                           -- in the subject DN
           assigner           OBJECT IDENTIFIER      OPTIONAL
                           -- if absent, the assigner is
                           -- the certificate issuer
   }

   The identifierValue field is optional.

      When the identifierValue field is present, then the
      identifierValue supports one syntax: UTF8String.

      When the identifierValue field is absent, then the value of the
      serialNumber attribute (as defined in section 5.2.9 of [X.520])
      from the deepest RDN of the subject DN is the value to be taken
      for the identifierValue.  In such a case, there MUST be at least
      one serialNumber attribute in the subject DN, otherwise the
      PermanentIdentifier SHALL NOT be used.

   The assigner field is optional.

      When the assigner field is present, then it is an OID which
      identifies a naming space, i.e., both an Assigner Authority and
      the type of that field.  Characteristically, the prefix of the OID
      identifies the Assigner Authority, and a suffix is used to
      identify the type of permanent identifier.

      When the assigner field is absent, then the permanent identifier
      is locally unique to the CA.

   The various combinations are detailed below:

   1. Both the assigner and the identifierValue fields are present:

      The identifierValue is the value for that type of identifier.  The
      assigner field identifies the Assigner Authority and the type of
      permanent identifier being identified.

      The permanent identifier is globally unique among all CAs.  In
      such a case, two permanent identifiers of this type match if and
      only if their assigner fields match and the contents of the
      identifierValue field in the two permanent identifiers consist of
      the same Unicode code points presented in the same order.

   2. The assigner field is absent and the identifierValue field is
      present:

      The Assigner Authority is the CA that has issued the certificate.
      The identifierValue is given by the CA and the permanent
      identifier is only local to the CA that has issued the
      certificate.

      In such a case, two permanent identifiers of this type match if
      and only if the issuer DN's in the certificates which contain them
      match using the distinguishedNameMatch rule, as defined in X.501,
      and the two values of the identifierValue field consist of the
      same Unicode code points presented in the same order.

   3. Both the assigner and the identifierValue fields are absent:

      If there are one or more RDNs containing a serialNumber attribute
      (alone or accompanied by other attributes), then the value
      contained in the serialNumber of the deepest such RDN SHALL be
      used as the identifierValue; otherwise, the Permanent Identifier
      definition is invalid and the Permanent Identifier SHALL NOT be
      used.

      The permanent identifier is only local to the CA that has issued
      the certificate.  In such a case, two permanent identifiers of
      this type match if and only if the issuer DN's in the certificates
      which contain them match and the serialNumber attributes within
      the subject DN's of those same certificates also match using the
      caseIgnoreMatch rule.

   4. The assigner field is present and the identifierValue field is
      absent:

      If there are one or more RDNs containing a serialNumber attribute
      (alone or accompanied by other attributes), then the value
      contained in the serialNumber of the deepest such RDN SHALL be
      used as the identifierValue; otherwise, the Permanent Identifier
      definition is invalid and the Permanent Identifier SHALL NOT be
      used.

      The assigner field identifies the Assigner Authority and the type
      of permanent identifier being identified.

      The permanent identifier is globally unique among all CAs.  In
      such a case, two permanent identifiers of this type match if and
      only if their assigner fields match and the contents of the
      serialNumber attributes within the subject DN's of those same
      certificates match using the caseIgnoreMatch rule.

   Note: The full arc of the object identifier used to identify the
         permanent identifier name form is derived using:

      id-pkix OBJECT IDENTIFIER ::= { iso(1) identified-organization(3)
         dod(6) internet(1) security(5) mechanisms(5) pkix(7) }

      id-on OBJECT IDENTIFIER ::= { id-pkix 8 }   -- other name forms

3.  IANA Considerations

   No IANA actions are necessary.  However, a Private Enterprise Number
   may be used to construct an OID for the assigner field (see Annex
   B.1.).

4.  Security Considerations

   A given entity may have at an instant of time or at different
   instants of time multiple forms of identities.  If the permanent
   identifier is locally unique to the CA (i.e., the assigner field is
   not present), then two certificates from the same CA can be compared.

   When two certificates contain identical permanent identifiers, then a
   relying party may determine that they refer to the same entity.

   If the permanent identifier is globally unique among all CAs (i.e.,
   the assigner field is present), then two certificates from different
   CAs can be compared.  When they contain two identical permanent
   identifiers, then a relying party may determine that they refer to
   the same entity.  It is the responsibility of the CA to verify that
   the permanent identifier being included in the certificate refers to
   the subject being certified.

   The permanent identifier identifies the entity, irrespective of any
   attribute extension.  When a public key certificate contains
   attribute extensions, the permanent identifier, if present, should
   not be used for access control purposes but only for audit purposes.
   The reason is that since these attributes may change, access could be
   granted on attributes that were originally present in a certificate
   issued to that entity but are no longer present in the current
   certificate.

   Subject names in certificates are chosen by the issuing CA and are
   mandated to be unique for each CA; so there can be no name collision
   between subject names from the same CA.  Such a name may be an end-
   entity name when the certificate is a leaf certificate, or a CA name,
   when it is a CA certificate.

   Since a name is only unique towards its superior CA, unless some
   naming constraints are being used, a name would only be guaranteed to
   be globally unique when considered to include a sequence of all the
   names of the superior CAs.  Thus, two certificates that are issued
   under the same issuer DN and which contain the same permanent
   identifier extension without an assigner field do not necessarily
   refer to the same entity.

   Additional checks need to be done, e.g., to check if the public key
   values of the two CAs which have issued the certificates to be
   compared are identical or if the sequence of CA names in the
   certification path from the trust anchor to the CA are identical.

   When the above checks fail, the permanent identifiers may still match
   if there has been a CA key rollover.  In such a case the checking is
   more complicated.

   The certification of different CAs with the same DN by different CAs
   has other negative consequences in various parts of the PKI, notably
   rendering the IssuerAndSerialNumber structure in [RFC3852] section
   10.2.4 ambiguous.

   The permanent identifier allows organizations to create links between
   different certificates associated with an entity issued with or
   without overlapping validity periods.  This ability to link different
   certificates may conflict with privacy.  It is therefore important
   that a CA clearly disclose any plans to issue certificates which
   include a permanent identifier to potential subjects of those
   certificates.

5.  References

5.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3280]  Housley, R., Polk, W., Ford, W., and D. Solo, "Internet
              X.509 Public Key Infrastructure Certificate and
              Certificate Revocation List (CRL) Profile", RFC 3280,
              April 2002.

   [UTF-8]    Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [X.501]    ITU-T Rec X.501 | ISO 9594-2: 2001: Information technology
              - Open Systems Interconnection - The Directory: Models,
              February 2001.

5.2.  Informative References

   [RFC3852]  Housley, R., "Cryptographic Message Syntax (CMS)", RFC
              3852, July 2004.

   [X.509]    ITU-T Recommendation X.509 (1997 E): Information
              Technology - Open Systems Interconnection - The Directory:
              Authentication Framework, June 1997.

   [X.520]    ITU-T Recommendation X.520: Information Technology - Open
              Systems Interconnection - The Directory: Selected
              Attribute Types, June 1997.

   [X.660]    ITU-T Recommendation X.660: Information Technology - Open
              Systems Interconnection - Procedures for the Operation of
              OSI Registration Authorities: General Procedures, 1992.

   [X.680]    ITU-T Recommendation X.680: Information Technology -
              Abstract Syntax Notation One, 1997.

Appendix A.  ASN.1 Syntax

   As in RFC 2459, ASN.1 modules are supplied in two different variants
   of the ASN.1 syntax.

   This section describes data objects used by conforming PKI components
   in an "ASN.1-like" syntax.  This syntax is a hybrid of the 1988 and
   1993 ASN.1 syntaxes.  The 1988 ASN.1 syntax is augmented with 1993
   the UNIVERSAL Type UTF8String.

   The ASN.1 syntax does not permit the inclusion of type statements in
   the ASN.1 module, and the 1993 ASN.1 standard does not permit use of
   the new UNIVERSAL types in modules using the 1988 syntax.  As a
   result, this module does not conform to either version of the ASN.1
   standard.

   Appendix A.1 may be parsed by an 1988 ASN.1-parser by replacing the
   definitions for the UNIVERSAL Types with the 1988 catch-all "ANY".

   Appendix A.2 may be parsed "as is" by an 1997-compliant ASN.1 parser.

   In case of discrepancies between these modules, the 1988 module is
   the normative one.

Appendix A.1.  1988 ASN.1 Module

  PKIXpermanentidentifier88 {iso(1) identified-organization(3) dod(6)
         internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
         id-mod-perm-id-88(28) }

  DEFINITIONS EXPLICIT TAGS ::=

     BEGIN

     -- EXPORTS ALL --

     IMPORTS

  -- UTF8String, / move hyphens before slash if UTF8String does not
  -- resolve with your compiler
  -- The content of this type conforms to [UTF-8].

          id-pkix
                FROM PKIX1Explicit88 { iso(1) identified-organization(3)
                dod(6) internet(1) security(5) mechanisms(5) pkix(7)
                id-mod(0) id-pkix1-explicit(18) } ;
                -- from [RFC3280]

     -- Permanent identifier Object Identifier and Syntax

     id-on   OBJECT IDENTIFIER ::= { id-pkix 8 }

     id-on-permanentIdentifier   OBJECT IDENTIFIER ::= { id-on 3 }

     PermanentIdentifier ::= SEQUENCE {
          identifierValue    UTF8String             OPTIONAL,
                          -- if absent, use the serialNumber attribute
                          -- if there is a single such attribute present
                          -- in the subject DN
          assigner           OBJECT IDENTIFIER      OPTIONAL
                          -- if absent, the assigner is
                          -- the certificate issuer
  }

  END

Appendix A.2.  1993 ASN.1 Module 

   PKIXpermanentidentifier93 {iso(1) identified-organization(3) dod(6)
       internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
       id-mod-perm-id-93(29) }

   DEFINITIONS EXPLICIT TAGS ::=

   BEGIN

   -- EXPORTS ALL --

    IMPORTS
        OTHER-NAME
            FROM CertificateExtensions {joint-iso-itu-t ds(5) module(1)
              certificateExtensions(26) 4} ;
              -- from Module CertificateExtensions (X.509:03/2000)


   -- Permanent identifier Object Identifiers

   id-pkix  OBJECT IDENTIFIER  ::=  { iso(1)
       identified-organization(3) dod(6) internet(1)security(5)
       mechanisms(5) pkix(7) }

   id-on   OBJECT IDENTIFIER ::= { id-pkix 8 }

   id-on-permanentIdentifier   OBJECT IDENTIFIER ::= { id-on 3 }


   -- Permanent Identifier

   permanentIdentifier OTHER-NAME ::=
     { PermanentIdentifier IDENTIFIED BY id-on-permanentIdentifier }

   PermanentIdentifier ::= SEQUENCE {
        identifierValue    UTF8String             OPTIONAL,
                        -- if absent, use the serialNumber attribute
                        -- if there is a single such attribute present
                        -- in the subject DN
        assigner           OBJECT IDENTIFIER      OPTIONAL
                        -- if absent, the assigner is
                        -- the certificate issuer
   }

   END

EID 192 (Verified) is as follows:

Section: 99Appendix A.2.  1993 ASN.1 Module says:

Original Text:

Appendix A.2.  1993 ASN.1 Module

PKIXpermanentidentifier93 {iso(1) identified-organization(3) dod(6)
       internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
       id-mod-perm-id-93(29) }

   DEFINITIONS EXPLICIT TAGS ::=

   BEGIN

   -- EXPORTS ALL --

   IMPORTS

        id-pkix
              FROM PKIX1Explicit88 { iso(1) identified-organization(3)
              dod(6) internet(1) security(5) mechanisms(5) pkix(7)
              id-mod(0) id-pkix1-explicit(18) }
               -- from [RFC3280]

        ATTRIBUTE
              FROM InformationFramework {joint-iso-itu-t ds(5) module(1)
              informationFramework(1) 4};
               -- from [X.501]

   -- Permanent identifier Object Identifiers

   id-on   OBJECT IDENTIFIER ::= { id-pkix 8 }

   id-on-permanentIdentifier   OBJECT IDENTIFIER ::= { id-on 3 }

   -- Permanent Identifier

   permanentIdentifier ATTRIBUTE ::= {
          WITH SYNTAX     PermanentIdentifier
          ID              id-on-permanentIdentifier }

   PermanentIdentifier ::= SEQUENCE {
        identifierValue    UTF8String             OPTIONAL,
                        -- if absent, use the serialNumber attribute
                        -- if there is a single such attribute present
                        -- in the subject DN
        assigner           OBJECT IDENTIFIER      OPTIONAL
                        -- if absent, the assigner is
                        -- the certificate issuer
}

END

Corrected Text:

Appendix A.2.  1993 ASN.1 Module

   PKIXpermanentidentifier93 {iso(1) identified-organization(3) dod(6)
       internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
       id-mod-perm-id-93(29) }

   DEFINITIONS EXPLICIT TAGS ::=

   BEGIN

   -- EXPORTS ALL --

    IMPORTS
        OTHER-NAME
            FROM CertificateExtensions {joint-iso-itu-t ds(5) module(1)
              certificateExtensions(26) 4} ;
              -- from Module CertificateExtensions (X.509:03/2000)


   -- Permanent identifier Object Identifiers

   id-pkix  OBJECT IDENTIFIER  ::=  { iso(1)
       identified-organization(3) dod(6) internet(1)security(5)
       mechanisms(5) pkix(7) }

   id-on   OBJECT IDENTIFIER ::= { id-pkix 8 }

   id-on-permanentIdentifier   OBJECT IDENTIFIER ::= { id-on 3 }


   -- Permanent Identifier

   permanentIdentifier OTHER-NAME ::=
     { PermanentIdentifier IDENTIFIED BY id-on-permanentIdentifier }

   PermanentIdentifier ::= SEQUENCE {
        identifierValue    UTF8String             OPTIONAL,
                        -- if absent, use the serialNumber attribute
                        -- if there is a single such attribute present
                        -- in the subject DN
        assigner           OBJECT IDENTIFIER      OPTIONAL
                        -- if absent, the assigner is
                        -- the certificate issuer
   }

   END
Notes:
Appendix B. OID's for Organizations In order to construct an OID for the assigner field, organizations need first to have a registered OID for themselves. Such an OID must be obtained from a registration authority following [X.660]. In some cases, OID's are provided for free. In other cases a one-time fee is required. The main difference lies in the nature of the information that is collected at the time of registration and how this information is verified for its accuracy. Appendix B.1. Using IANA (Internet Assigned Numbers Authority) The application form for a Private Enterprise Number in the IANA's OID list is: http://www.iana.org/cgi-bin/enterprise.pl. Currently, IANA assigns numbers for free. The IANA-registered Private Enterprises prefix is: iso.org.dod.internet.private.enterprise (1.3.6.1.4.1) These numbers are used, among other things, for defining private SNMP MIBs. The official assignments under this OID are stored in the IANA file "enterprise-numbers" available at: http://www.iana.org/assignments/enterprise-numbers Appendix B.2. Using an ISO Member Body ISO has defined the OID structure in a such a way so that every ISO member-body has its own unique OID. Then every ISO member-body is free to allocate its own arc space below. Organizations and enterprises may contact the ISO member-body where their organization or enterprise is established to obtain an organization/enterprise OID. Currently, ISO members do not assign organization/enterprise OID's for free. Most of them do not publish registries of such OID's which they have assigned, sometimes restricting the access to registered organizations or preferring to charge inquirers for the assignee of an OID on a per-inquiry basis. The use of OID's from an ISO member organization which does not publish such a registry may impose extra costs on the CA that needs to make sure that the OID corresponds to the registered organization. As an example, AFNOR (Association Francaise de Normalisation - the French organization that is a member of ISO) has defined an arc to allocate OID's for companies: {iso (1) member-body (2) fr (250) type-org (1) organisation (n)} Appendix B.3. Using an ICD (International Code Designator) From British Standards Institution to Specify a New or an Existing Identification Scheme The International Code Designator (ICD) is used to uniquely identify an ISO 6523 compliant organization identification scheme. ISO 6523 is a standard that defines the proper structure of an identifier and the registration procedure for an ICD. The conjunction of the ICD with an identifier issued by the registration authority is worldwide unique. The basic structure of the code contains the following components: - the ICD value: The International Code Designator issued to the identification scheme makes the identifier worldwide unique (up to 4 digits), - the Organization, usually a company or governmental body (up to 35 characters), - an Organization Part (OPI - Organization Part Identifier). An identifier allocated to a particular Organization Part (optional, up to 35 characters) The ICD is also equivalent to an object identifier (OID) under the arc {1(iso). 3(identified organization)}. On behalf of ISO, British Standards Institution (BSI) is the Registration Authority for organizations under the arc {iso (1) org(3)}. This means BSI registers code issuing authorities (organizations) by ICD values which are equivalent to OIDs of the form {iso (1) org(3) icd(xxxx)}. The corresponding IdentifierValue is the code value of the scheme identified by icd(xxxx). As an example, the ICD 0012 was allocated to European Computer Manufacturers Association: ECMA. Thus the OID for ECMA is {iso(1) org(3) ecma(12)}. For registration with BSI, a "Sponsoring Authority" has to vouch for the Applying organization. Registration is not free. Recognized "Sponsoring Authorities" are: ISO Technical Committees or (Sub)Committees, Member Bodies of ISO or International Organizations having a liaison status with ISO or with any of its Technical (Sub)Committees. An example of a Sponsoring Authority is the EDIRA Association (EDI/EC Registration Authority, web: http://www.edira.org, email:info@edira.org). The numerical list of all ICDs that have been issued is posted on its webpage: http://www.edira.org/documents.htm#icd-List Note: IANA owns ICD code 0090, but (presumably) it isn't intending to use it for the present purpose. Authors' Addresses Denis Pinkas Bull Rue Jean-Jaures BP 68 78340 Les Clayes-sous-Bois FRANCE EMail: Denis.Pinkas@bull.net Thomas Gindin IBM Corporation 6710 Rockledge Drive Bethesda, MD 20817 USA EMail: tgindin@us.ibm.com Full Copyright Statement Copyright (C) The Internet Society (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.