[rfc-dist] RFC 5330 on A Link-Type sub-TLV to Convey the Number of Traffic Engineering Label Switched Paths Signalled with Zero Reserved Bandwidth across a Link
rfc-editor@rfc-editor.org
rfc-editor at rfc-editor.org
Fri Oct 17 15:24:03 PDT 2008
A new Request for Comments is now available in online RFC libraries.
RFC 5330
Title: A Link-Type sub-TLV to Convey
the Number of Traffic Engineering Label
Switched Paths Signalled with Zero Reserved
Bandwidth across a Link
Author: JP. Vasseur, Ed.,
M. Meyer, K. Kumaki,
A. Bonda
Status: Standards Track
Date: October 2008
Mailbox: jpv at cisco.com,
matthew.meyer at bt.com,
ke-kumaki at kddi.com,
alberto.tempiabonda at telecomitalia.it
Pages: 8
Characters: 15730
Updates/Obsoletes/SeeAlso: None
I-D Tag: draft-ietf-mpls-number-0-bw-te-lsps-12.txt
URL: http://www.rfc-editor.org/rfc/rfc5330.txt
Several Link-type sub-Type-Length-Values (sub-TLVs) have been defined
for Open Shortest Path First (OSPF) and Intermediate System to
Intermediate System (IS-IS) in the context of Multiprotocol Label
Switching (MPLS) Traffic Engineering (TE), in order to advertise some
link characteristics such as the available bandwidth, traffic
engineering metric, administrative group, and so on. By making
statistical assumptions about the aggregated traffic carried onto a
set of TE Label Switched Paths (LSPs) signalled with zero bandwidth
(referred to as "unconstrained TE LSP" in this document), algorithms
can be designed to load balance (existing or newly configured)
unconstrained TE LSP across a set of equal cost paths. This requires
knowledge of the number of unconstrained TE LSPs signalled across a link.
This document specifies a new Link-type
Traffic Engineering sub-TLV used to advertise the number of
unconstrained TE LSPs signalled across a link. [STANDARDS TRACK]
This document is a product of the Multiprotocol Label Switching Working Group of the IETF.
This is now a Proposed Standard Protocol.
STANDARDS TRACK: This document specifies an Internet standards track
protocol for the Internet community,and requests discussion and suggestions
for improvements. Please refer to the current edition of the Internet
Official Protocol Standards (STD 1) for the standardization state and
status of this protocol. Distribution of this memo is unlimited.
This announcement is sent to the IETF-Announce and rfc-dist lists.
To subscribe or unsubscribe, see
http://www.ietf.org/mailman/listinfo/ietf-announce
http://mailman.rfc-editor.org/mailman/listinfo/rfc-dist
For searching the RFC series, see http://www.rfc-editor.org/rfcsearch.html.
For downloading RFCs, see http://www.rfc-editor.org/rfc.html.
Requests for special distribution should be addressed to either the
author of the RFC in question, or to rfc-editor at rfc-editor.org. Unless
specifically noted otherwise on the RFC itself, all RFCs are for
unlimited distribution.
The RFC Editor Team
USC/Information Sciences Institute
More information about the rfc-dist
mailing list