[rfc-dist] RFC 4719 on Transport of Ethernet Frames over Layer 2 Tunneling Protocol Version 3 (L2TPv3)

rfc-editor@rfc-editor.org rfc-editor at rfc-editor.org
Tue Nov 14 16:22:09 PST 2006


A new Request for Comments is now available in online RFC libraries.

        
        RFC 4719

        Title:      Transport of Ethernet Frames over 
                    Layer 2 Tunneling Protocol Version 3 
                    (L2TPv3) 
        Author:     R. Aggarwal, Ed.,
                    M. Townsley, Ed.,
                    M. Dos Santos, Ed.
        Status:     Standards Track
        Date:       November 2006
        Mailbox:    rahul at juniper.net, 
                    mark at townsley.net, 
                    mariados at cisco.com
        Pages:      14
        Characters: 30764
        Updates/Obsoletes/SeeAlso:   None

        I-D Tag:    draft-ietf-l2tpext-pwe3-ethernet-09.txt

        URL:        http://www.rfc-editor.org/rfc/rfc4719.txt

This document describes the transport of Ethernet frames over the Layer 2
Tunneling Protocol, Version 3 (L2TPv3).  This includes the transport of 
Ethernet port-to-port frames as well as the transport of Ethernet VLAN 
frames.  The mechanism described in this document can be used in the 
creation of Pseudowires to transport Ethernet frames over an IP network.  
[STANDARDS TRACK]

This document is a product of the Layer Two Tunneling Protocol Extensions
Working Group of the IETF.

This is now a Proposed Standard Protocol.

STANDARDS TRACK: This document specifies an Internet standards track
protocol for the Internet community,and requests discussion and 
suggestions for improvements.Please refer to the current edition of the 
Internet Official Protocol Standards (STD 1) for the standardization 
state and status of this protocol.  Distribution of this memo is 
unlimited.

This announcement is sent to the IETF list and the RFC-DIST list.
Requests to be added to or deleted from the IETF distribution list
should be sent to IETF-REQUEST at IETF.ORG.  Requests to be
added to or deleted from the RFC-DIST distribution list should
be sent to RFC-DIST-REQUEST at RFC-EDITOR.ORG.

Details on obtaining RFCs via FTP or EMAIL may be obtained by sending
an EMAIL message to rfc-info at RFC-EDITOR.ORG with the message body 

help: ways_to_get_rfcs. For example:

        To: rfc-info at RFC-EDITOR.ORG
        Subject: getting rfcs

        help: ways_to_get_rfcs

Requests for special distribution should be addressed to either the
author of the RFC in question, or to RFC-Manager at RFC-EDITOR.ORG.  Unless
specifically noted otherwise on the RFC itself, all RFCs are for
unlimited distribution.

Submissions for Requests for Comments should be sent to
RFC-EDITOR at RFC-EDITOR.ORG.  Please consult RFC 2223, Instructions to RFC
Authors, for further information.


Joyce K. Reynolds and Sandy Ginoza
USC/Information Sciences Institute

...




More information about the rfc-dist mailing list