Pseudowire Setup and Maintenance Using the Label Distribution Protocol (LDP), February 2017
- Canonical URL:
- File formats:
- INTERNET STANDARD
- RFC 4447, RFC 6723
- L. Martini, Ed.
G. Heron, Ed.
- pals (rtg)
Cite this STD: TXT
Discuss this RFC: Send questions or comments to email@example.com
Layer 2 services (such as Frame Relay, Asynchronous Transfer Mode, and Ethernet) can be emulated over an MPLS backbone by encapsulating the Layer 2 Protocol Data Units (PDUs) and then transmitting them over pseudowires (PWs). It is also possible to use pseudowires to provide low-rate Time-Division Multiplexed and Synchronous Optical NETworking circuit emulation over an MPLS-enabled network. This document specifies a protocol for establishing and maintaining the pseudowires, using extensions to the Label Distribution Protocol (LDP). Procedures for encapsulating Layer 2 PDUs are specified in other documents. This document is a rewrite of RFC 4447 for publication as an Internet Standard.
For the definition of Status, see RFC 2026.
For the definition of Stream, see RFC 4844.