Internet Engineering Task Force (IETF)                        P. Resnick
Request for Comments: 7282                   Qualcomm Technologies, Inc.
Category: Informational                                        June 2014
ISSN: 2070-1721


                  On Consensus and Humming in the IETF

Abstract

   The IETF has had a long tradition of doing its technical work through
   a consensus process, taking into account the different views among
   IETF participants and coming to (at least rough) consensus on
   technical matters.  In particular, the IETF is supposed not to be run
   by a "majority rule" philosophy.  This is why we engage in rituals
   like "humming" instead of voting.  However, more and more of our
   actions are now indistinguishable from voting, and quite often we are
   letting the majority win the day without consideration of minority
   concerns.  This document explains some features of rough consensus,
   what is not rough consensus, how we have gotten away from it, how we
   might think about it differently, and the things we can do in order
   to really achieve rough consensus.

   Note: This document is quite consciously being put forward as
   Informational.  It does not propose to change any IETF processes and
   is therefore not a BCP.  It is simply a collection of principles,
   hopefully around which the IETF can come to (at least rough)
   consensus.

Status of This Memo

   This document is not an Internet Standards Track specification; it is
   published for informational purposes.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Not all documents
   approved by the IESG are a candidate for any level of Internet
   Standard; see Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7282.







Resnick                       Informational                     [Page 1]


RFC 7282                      On Consensus                     June 2014


Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Lack of disagreement is more important than agreement . . . .   4
   3.  Rough consensus is achieved when all issues are addressed,
       but not necessarily accommodated  . . . . . . . . . . . . . .   7
   4.  Humming should be the start of a conversation, not the end  .  10
   5.  Consensus is the path, not the destination  . . . . . . . . .  13
   6.  One hundred people for and five people against might not be
       rough consensus . . . . . . . . . . . . . . . . . . . . . . .  14
   7.  Five people for and one hundred people against might still be
       rough consensus . . . . . . . . . . . . . . . . . . . . . . .  16
   8.  Conclusion  . . . . . . . . . . . . . . . . . . . . . . . . .  18
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  18
   10. Informative References  . . . . . . . . . . . . . . . . . . .  18
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . .  19




















Resnick                       Informational                     [Page 2]


RFC 7282                      On Consensus                     June 2014


1.  Introduction

   Almost every IETF participant knows the aphorism from Dave Clark's
   1992 plenary presentation [Clark] regarding how we make decisions in
   the IETF:

      We reject: kings, presidents and voting.

      We believe in: rough consensus and running code.

   That is, our credo is that we don't let a single individual dictate
   decisions (a king or president), nor should decisions be made by a
   vote, nor do we want decisions to be made in a vacuum without
   practical experience.  Instead, we strive to make our decisions by
   the consent of all participants, though allowing for some dissent
   (rough consensus), and to have the actual products of engineering
   (running code) trump theoretical designs.

   Having full consensus, or unanimity, would be ideal, but we don't
   require it: Requiring full consensus allows a single intransigent
   person who simply keeps saying "No!" to stop the process cold.  We
   only require rough consensus: If the chair of a working group
   determines that a technical issue brought forward by an objector has
   been truly considered by the working group, and the working group has
   made an informed decision that the objection has been answered or is
   not enough of a technical problem to prevent moving forward, the
   chair can declare that there is rough consensus to go forward, the
   objection notwithstanding.

   To reinforce that we do not vote, we have also adopted the tradition
   of "humming": When, for example, we have face-to-face meetings and
   the chair of the working group wants to get a "sense of the room",
   instead of a show of hands, sometimes the chair will ask for each
   side to hum on a particular question, either "for" or "against".

   However, in recent years we have seen participants (and even some
   folks in IETF leadership) who do not understand some of the
   subtleties of consensus-based decision making.  Participants ask,
   "Why don't we just vote?  Why are we bothering with this 'humming'
   thing?"  Or even more concerning, "We've already hummed/voted, so why
   isn't the discussion concluded?"  Chairs, many of whom have little
   experience in leading large volunteer groups like those in the IETF,
   let alone experience in how to gather consensus, are faced with
   factious working groups with polarized viewpoints and long-running
   unresolved issues that return again and again to the agenda.  More
   and more frequently, people walk away from working groups, thinking
   that "consensus" has created a document with horrible compromises to
   satisfy everyone's pet peeve instead of doing "the right thing".



Resnick                       Informational                     [Page 3]


RFC 7282                      On Consensus                     June 2014


   None of these things are indicators of a rough consensus process
   being used, and the fact that we are seeing them is likely due to
   some basic misperceptions.

   This document explains some features of rough consensus, explains
   what is not rough consensus, discusses some new ways to think about
   rough consensus, and suggests ways that we might achieve rough
   consensus and judge it in the IETF.  Though this document describes
   some behaviors of working groups and chairs, it does so in broad
   brushstrokes and it does not prescribe specific procedures.  Rather,
   this document is intended to foster understanding of the underlying
   principles of IETF consensus processes.  While it may be of general
   interest to anyone interested in the IETF consensus processes, the
   primary audience for this document is those who have experience
   working in the IETF and are trying to understand and participate in
   the consensus-building process, and it is particularly aimed at
   generating thought and discussion among those who might lead a
   consensus discussion.  Although most of the examples in this document
   talk about working group chairs, these principles apply to any person
   who is trying to lead a group to rough consensus, whether a chair, a
   design team leader, a document editor, an area director, or any
   community member who is facilitating a discussion or trying to assess
   consensus.

   While the community has come to rough consensus that the principles
   expressed in this document are (at least approximately) right, many
   of our current practices are not consistent with these principles.
   Again, this document is primarily intended to generate thought and
   discussion, not dictate practices.  If the IETF does commit itself to
   these principles, practices may change in the future.

2.  Lack of disagreement is more important than agreement

   A working group comes to a technical question of whether to use
   format A or format B for a particular data structure.  The chair
   notices that a number of experienced people think format A is a good
   choice.  The chair asks on the mailing list, "Is everyone OK with
   format A?"  Inevitably, a number of people object to format A for one
   or another technical reason.  The chair then says, "It sounds like we
   don't have consensus to use format A.  Is everyone OK with format B?"
   This time even more people object to format B, on different technical
   grounds.  The chair, not having agreement on either format A or
   format B, is left perplexed, thinking the working group has
   deadlocked.

   The problem that the chair got themselves into was thinking that what
   they were searching for was agreement.  "After all", thinks the
   chair, "consensus is a matter of getting everyone to agree, so asking



Resnick                       Informational                     [Page 4]


RFC 7282                      On Consensus                     June 2014


   whether everyone agrees is what the chair ought to do.  And if lots
   of people disagree, there's no consensus."  But _determining_
   consensus and _coming to_ consensus are different things than
   _having_ consensus.

   The distinction might be a bit subtle, but it's important.
   Engineering always involves a set of tradeoffs.  It is almost certain
   that any time engineering choices need to be made, there will be
   options that appeal to some people, but are not appealing to some
   others.  In determining consensus, the key is to separate those
   choices that are simply unappealing from those that are truly
   problematic.  If at the end of the discussion some people have not
   gotten the choice that they prefer, but they have become convinced
   that the chosen solution is acceptable, albeit less appealing, they
   have still come to consensus.  Consensus doesn't require that
   everyone is happy and agrees that the chosen solution is the best
   one.  Consensus is when everyone is sufficiently satisfied with the
   chosen solution, such that they no longer have specific objections to
   it.

   So, in the case of a working group decision, after the initial
   discussion of the pros and cons of the available choices, it is most
   important to ask not just for objections to a particular proposal,
   but for the nature of those objections.  A chair who asks, "Is
   everyone OK with choice A?" is going to get objections.  But a chair
   who asks, "Can anyone not live with choice A?" is more likely to only
   hear from folks who think that choice A is impossible to engineer
   given some constraints.  Following up with, "What are the reasons you
   object to choice A?" is also essential.  Then, the purported failings
   of the choice can be examined by the working group.  The objector
   might convince the rest of the group that the objections are valid
   and the working group might choose a different path.  Conversely, the
   working group might convince the objector that the concerns can be
   addressed, or that the choice is simply unappealing (i.e., something
   the objector can "live with") and not a show-stopper.  In any event,
   closure is much more likely to be achieved quickly by asking for and
   trying to accommodate the objections rather than asking for
   agreement.

   The above discussion does not mean that sorting out disagreements is
   the only thing that needs to be done for successful consensus.  An
   engineering solution that has no objections, but also has no base of
   support and is met with complete apathy, is not a solution that has
   any useful sort of consensus.  Consensus does require the active
   engagement and eventual support of those who are working on the
   solution.  However, finding mere "agreement" among participants is
   not enough.  People might very well agree that a solution is




Resnick                       Informational                     [Page 5]


RFC 7282                      On Consensus                     June 2014


   sufficient and have no objection to it, but if they also don't
   actively think it's a good and correct outcome, it's absurd to
   declare that the group has consensus.

   There is also an important point to be made about reaching consensus
   and "compromising": Unfortunately, the word "compromise" gets used in
   two different ways, and though one sort of compromising to come to
   consensus is good (and important), the other sort of compromising in
   order to achieve consensus can actually be harmful.  As mentioned
   earlier, engineering always involves balancing tradeoffs, and
   figuring out whether one engineering decision makes more sense on
   balance compared to another involves making engineering
   "compromises": We might have to compromise processor speed for lower
   power consumption, or compromise throughput for congestion
   resistance.  Those sorts of compromises are among engineering
   choices, and they are expected and essential.  We always want to be
   weighing tradeoffs and collectively choosing the set that best meets
   the full set of requirements.

   However, there is another sense of "compromise" that involves
   compromising between people, not engineering principles.  For
   example, a minority of a group might object to a particular proposal,
   and even after discussion still think the proposal is deeply
   problematic, but decide that they don't have the energy to argue
   against it and say, "Forget it, do what you want".  That surely can
   be called a compromise, but a chair might mistakenly take this to
   mean that they agree, and have therefore come to consensus.  But
   really all that they've done is capitulated; they've simply given up
   by trying to appease the others.  That's not coming to consensus;
   there still exists an outstanding unaddressed objection.  Again, if
   the objection is only that the choice is not ideal but is otherwise
   acceptable, such a compromise is fine.  But conceding when there is a
   real outstanding technical objection is not coming to consensus.

   Even worse is the "horse-trading" sort of compromise: "I object to
   your proposal for such-and-so reasons.  You object to my proposal for
   this-and-that reason.  Neither of us agree.  If you stop objecting to
   my proposal, I'll stop objecting to your proposal and we'll put them
   both in."  That again results in an "agreement" of sorts, but instead
   of just one outstanding unaddressed issue, this sort of compromise
   results in two, again ignoring them for the sake of expedience.

   These sorts of "capitulation" or "horse-trading" compromises have no
   place in consensus decision making.  In each case, a chair who looks
   for "agreement" might find it in these examples because it appears
   that people have "agreed".  But answering technical disagreements is
   what is needed to achieve consensus, sometimes even when the people
   who stated the disagreements no longer wish to discuss them.



Resnick                       Informational                     [Page 6]


RFC 7282                      On Consensus                     June 2014


   Coming to consensus is when everyone (including the person making the
   objection) comes to the conclusion that either the objections are
   valid, and therefore make a change to address the objection, or that
   the objection was not really a matter of importance, but merely a
   matter of taste.  Of course, coming to full consensus like that does
   not always happen.  That's why in the IETF, we talk about "rough
   consensus".

3.  Rough consensus is achieved when all issues are addressed, but not
    necessarily accommodated

   The preceding discussion gives an example where the working group
   comes to consensus on a point: Either the objector is satisfied with
   the answer to the objection, or the working group is satisfied that
   the objection is valid and changes course.  But that doesn't happen
   all of the time, and it's certainly not the problematic case.  Again,
   engineering is always a set of tradeoffs.  Often, a working group
   will encounter an objection where everyone understands the issue and
   acknowledges that it is a real shortcoming in the proposed solution,
   but the vast majority of the working group believes that
   accommodating the objection is not worth the tradeoff of fixing the
   problem.

   So, an objector might say, "The proposal to go with protocol X is
   much more complicated than going with protocol Y.  Protocol Y is a
   much more elegant and clean solution, which I can code much more
   easily, and protocol X is a hack."  The working group might consider
   this input, and someone might respond, "But we have a great deal of
   code already written that is similar to protocol X.  While I agree
   that protocol Y is more elegant, the risks to interoperability with
   an untested solution are not worth it compared to the advantages of
   going with the well-understood protocol X."  If the chair finds, in
   their technical judgement, that the issue has truly been considered,
   and that the vast majority of the working group has come to the
   conclusion that the tradeoff is worth making, even in the face of
   continued objection from the person(s) who raised the issue, the
   chair can declare that the group has come to rough consensus.  (And
   even though this is framed in terms of a "vast majority", even that
   is not necessarily true.  This point is discussed in more detail in
   Sections 6 and 7.)

   Note that this portrays rough consensus as a fallback.  In one sense,
   it is: As a working group does its work and makes its choices, it
   behaves as if it is striving toward full consensus and tries to get
   all issues addressed to the satisfaction of everyone in the group,
   even those who originally held objections.  It treats rough consensus
   as a sort of "exception processing", to deal with cases where the
   person objecting still feels strongly that their objection is valid



Resnick                       Informational                     [Page 7]


RFC 7282                      On Consensus                     June 2014


   and must be accommodated.  But it is certainly true that, more often
   than not in the IETF, at least someone in the group will be
   unsatisfied with a particular decision.  In that sense, rough
   consensus might be closer to the norm than the exception.  However,
   when a participant says, "That's not my favorite solution, but I can
   live with it; I'm satisfied that we've made a reasonable choice",
   that participant is not in the "rough" part of a rough consensus; the
   group actually reached consensus if that person is satisfied with the
   outcome.  It's when the chair has to declare that an unsatisfied
   person still has an open issue, but that the group has truly answered
   the objection, that the consensus is only rough.

   Now, a conclusion of having only rough consensus relies heavily on
   the good judgement of the consensus caller.  The group must truly
   consider and weigh an issue before the objection can be dismissed as
   being "in the rough".  ("In the rough" is terminology from golf.
   "The rough" is the term for the longer grass at the side of the
   fairway, and if your ball has landed in the rough you are off course
   and away from the normal direction of play.  The phrase gets used
   quite a bit in the IETF as a play on words to complement "rough
   consensus" meaning that you are "in the rough" if you find yourself
   not agreeing with the rough consensus.)  The chair of a working group
   who is about to find that there is only rough consensus is going to
   have to decide that not only has the working group taken the
   objection seriously, but that it has fully examined the ramifications
   of not making a change to accommodate it, and that the outcome does
   not constitute a failure to meet the technical requirements of the
   work.  In order to do this, the chair will need to have a good idea
   of the purpose and architecture of the work being done, perhaps
   referring to the charter of the working group or a previously
   published requirements document, or even consulting with other
   experts on the topic, and then the chair will use their own technical
   judgement to make sure that the solution meets those requirements.
   It is possible that the chair can come to the wrong conclusion, and
   the chair's conclusion is always appealable should that occur, but
   the chair must use their judgement in these cases.  What can't happen
   is that the chair bases their decision solely on hearing a large
   number of voices simply saying, "The objection isn't valid."  That
   would simply be to take a vote.  A valid justification needs to me
   made.











Resnick                       Informational                     [Page 8]


RFC 7282                      On Consensus                     June 2014


   It is important to recognize that this view of rough consensus is a
   change from the way it sometimes has been characterized in the IETF.
   RFC 1603 [RFC1603] described rough consensus as the "dominant view"
   of the group:

      Working groups make decisions through a "rough consensus" process.
      IETF consensus does not require that all participants agree
      although this is, of course, preferred.  In general the dominant
      view of the working group shall prevail.  (However, it must be
      noted that "dominance" is not to be determined on the basis of
      volume or persistence, but rather a more general sense of
      agreement.)  Consensus can be determined by balloting, humming, or
      any other means on which the WG agrees (by rough consensus, of
      course).

   The above says that consensus can be "determined" by balloting and
   humming, and there are certainly IETF folks who have thought of rough
   consensus as being primarily about the percentage of people who agree
   with a decision.  Indeed, RFC 2418 [RFC2418] adds on to the above
   text by stating, "Note that 51% of the working group does not qualify
   as 'rough consensus' and 99% is better than rough."  This document
   actually disagrees with the idea that simply balloting or otherwise
   looking at percentages can "determine" consensus.  While counting
   heads might give a good guess as to what the rough consensus will be,
   doing so can allow important minority views to get lost in the noise.
   One of the strengths of a consensus model is that minority views are
   addressed, and using a rough consensus model should not take away
   from that.  That is why this document talks a great deal about
   looking at open issues rather than just counting the number of people
   who do or do not support any given issue.  Doing so has some
   interesting and surprising implications that are discussed in
   subsequent sections.

   Any finding of rough consensus needs, at some level, to provide a
   reasoned explanation to the person(s) raising the issue of why their
   concern is not going to be accommodated.  A good outcome is for the
   objector to understand the decision taken and accept the outcome,
   even though their particular issue is not being accommodated in the
   final product.

   Remember, if the objector feels that the issue is so essential that
   it must be attended to, they always have the option to file an
   appeal.  A technical error is always a valid basis for an appeal.
   The chair in making the consensus call (or whoever is responsible to
   hear an appeal) may determine that the issue was addressed and
   understood, but they also have the freedom and the responsibility to
   say, "The group did not take this technical issue into proper
   account" when appropriate.  Simply having a large majority of people



Resnick                       Informational                     [Page 9]


RFC 7282                      On Consensus                     June 2014


   agreeing to dismiss an objection is not enough to claim there is
   rough consensus; the group must have honestly considered the
   objection and evaluated that other issues weighed sufficiently
   against it.  Failure to do that reasoning and evaluating means that
   there is no true consensus.

4.  Humming should be the start of a conversation, not the end

   We don't vote in the IETF.  In some ways, we can't vote: Since the
   IETF is not a membership organization, it's nearly impossible to
   figure out who would get a vote for any given question.  We can't
   know who the "members" of any given working group would be at any one
   time, and we certainly can't know who all of the "members" of the
   IETF would be: That's why we refer to "participants" in the IETF; the
   IETF doesn't really have "members".  Indeed, we often recruit
   additional implementers and other experts into working groups in
   order to ensure that broader views are brought into the discussion.
   So, voting is simply not practical.  We've also decided that coming
   to consensus (albeit sometimes rough consensus) is an important thing
   to do.  Final decisions are supposed to be taken on the mailing list,
   which reinforces the idea that we come to consensus by looking at the
   open issues and not counting heads.  We do, on occasion, take
   informal polls to get a sense of the direction of the discussion, but
   we try not to treat a poll as a vote that decides the issue.  When we
   do discuss things face-to-face, we don't want to vote there either;
   we want to show that we are coming to consensus.  So, sometimes, to
   reinforce the notion that we're not voting, instead of a show of
   hands, we often "hum".

   However, more and more we see people who think that a hum is a sort
   of anonymous vote, with some chairs calling every question they have
   for the working group by asking for a hum and judging the result by
   the loudest hum, even saying things like, "There were lots of hums
   for choice 1 and very few hums for choice 2, so it sounds like we
   have rough consensus for choice 1."  This misses some really
   important points of using humming and is almost certainly mis-
   assessing the consensus.  Hums should not be used as votes.

   So, why should we engage in this strange practice of humming?  What
   are good reasons to "take a hum"?  One reason is pragmatic.  Quite
   often, a chair is faced with a room full of people who seem to be
   diametrically opposed on some choice facing the group.  In order to
   find a starting place for the conversation, it can be useful for the
   chair to ask for a hum to see if one of the choices already has a
   stronger base of support than the other (or any significant base of
   support at all, for that matter).  Sometimes the hum can tell a chair





Resnick                       Informational                    [Page 10]


RFC 7282                      On Consensus                     June 2014


   that the room isn't all that contentious after all, that it's just a
   few voices who were being especially vociferous during the initial
   discussion.

   Sometimes, the hum will make it clear that choice "foo" has a
   significant amount more support than choice "bar", and it is
   therefore likely easier to start the discussion by saying, "OK, 'foo'
   seems to have quite a bit of support.  Let's have the people that
   think 'foo' is a bad idea come up and tell us why it is problematic."
   At that point, the group can start going through the issues and see
   if any of them are showstoppers.  It could always turn out that one
   of the objections is instantly recognized by the entire group as a
   fatal flaw in "foo" and the group will then turn to a discussion of
   the merits (and demerits) of "bar" instead.  All that the hum does is
   give the chair a starting point: The hum indicated that there were
   less objections to "foo" than to "bar" at the beginning of the
   discussion, so starting with the objections to "foo" might shorten
   the discussion.

   Another good reason for us to hum is because it actually gives the
   chair the opportunity to take the temperature of the room.  A smaller
   bunch of loud hums for choice A and a larger number of non-committal
   hums for choice B might indicate that some people believe that there
   are serious problems with choice B, albeit the more popular by sheer
   number of people.  The chair might decide that starting with choice A
   and getting objections to it is the easier path forward and more
   likely to result in consensus in the end.  Remember, coming to
   consensus is a matter of eliminating disagreements, so the chair
   wants to choose the path that gets to the least objections fastest.
   A bunch of people who are not strongly committed to B might have no
   real technical objection to A, even though it is not their first
   preference.  There is always a chance that this could be misleading,
   or even abused, because some people are more willing to hum loudly
   than others (just by dint of personality), or that one of the quieter
   hums actually turns out to be a show-stopper that makes the original
   choice impossible.  However, keep in mind that taking the hum in this
   case is to figure out how to start the conversation.  The chair could
   always be surprised because the hum turns out to be unanimous and no
   further discussion is needed.  Otherwise, the hum begins the
   discussion, it doesn't end it.

   But couldn't all of the above could have been done with a show of
   hands instead of a hum?  Absolutely.  Indeed, on a mailing list there
   is no way to use humming and so a different kind of polling would be
   needed.  Even in face-to-face situations, sometimes we do use a show
   of hands.  But there are more symbolic reasons for using a hum
   instead of a show of hands when face-to-face: Of course, a chair
   could get the temperature of the room by doing a show of hands too,



Resnick                       Informational                    [Page 11]


RFC 7282                      On Consensus                     June 2014


   and knowing who specifically feels one way or another can help a good
   chair guide the subsequent conversation.  However, a show of hands
   might leave the impression that the number of people matters in some
   formal way.  A chair and a working group with a solid understanding
   of how consensus works can certainly do a show of hands and achieve
   exactly the same result as a hum.  But with less experienced folks, a
   show of hands can end up reinforcing the mistaken notion that a vote
   is taking place.  A chair can always take the hum and then later ask
   for specific folks to identify themselves to elicit more discussion.
   The advantage of the hum is that it makes it perfectly clear that the
   chair is simply figuring out the direction of the conversation.

   This also points to another misuse of any kind of informal polling:
   If the chair is already convinced that the group has come to
   consensus, there isn't much reason to take a poll.  In fact, taking a
   poll can serve to discourage those who might be in the minority from
   voicing their concerns to the group in the face of a large majority
   who wants to move forward.  Often, the right thing for the chair to
   do if they already sense consensus is to say, "It sounds to me like
   we have consensus for choice A.  Does anybody have any concerns about
   or objections to going with A?"  This allows folks to bring up issues
   to the group that the chair might have mistakenly missed without
   having them feel that the majority has "already spoken".

   The reverse situation can also have similar advantages and
   disadvantages: Sometimes a chair (say, of a birds-of-a-feather
   session, or a working group discussing a new proposed document) might
   want to make sure that there really is a good base of support to go
   forward with a proposal, and takes a hum.  This can let the chair see
   if there are more than a handful of active people who are really
   interested in the new work.  However, this has pitfalls as well:
   Someone may be dissuaded from raising what could be an essential
   concern if they feel that the group is overwhelmingly in favor of
   going forward, or conversely some folks may decide to "hum along with
   the crowd" even though they're not committed to the outcome.  Indeed,
   the formulation, or even the order, of questions asked during a hum
   can have huge effects on the outcome: Asking simply, "Who supports
   going forward with this proposal?", and asking it first, can itself
   cause more people to hum in the affirmative than would for
   differently formulated questions, or asking the same question after
   some more "negatively" framed questions.  Any sort of polling,
   whether hums or even a show of hands, must be done with caution and
   should almost always be used to prompt discussion and questions, not
   to conclude the matter.

   There are times where the result of a hum is a pretty even split.  In
   practical terms, that means it doesn't matter where the chair starts
   the discussion.  And in fact, we've had working groups where a coin



Resnick                       Informational                    [Page 12]


RFC 7282                      On Consensus                     June 2014


   flip decided which proposal to start with.  That doesn't mean that
   the coin flip determined the outcome; if a fatal technical flaw was
   found in the solution that won the coin flip, it is still incumbent
   upon the group to address the issue raised or abandon that solution
   and find another.  Rough consensus on the technical points, in the
   end, is always required.  Any way to find a place to start, be it the
   hum or the coin flip, is only getting to the beginning of the
   discussion, not the end.

5.  Consensus is the path, not the destination

   We don't try to reach consensus in the IETF as an end in itself.  We
   use consensus-building as a tool to get to the best technical (and
   sometimes procedural) outcome when we make decisions.  Experience has
   shown us that traditional voting leads to gaming of the system,
   "compromises" of the wrong sort as described earlier, important
   minority views being ignored, and, in the end, worse technical
   outcomes.

   Coming to consensus by looking for objections, tracking open issues,
   and using hums as the start of discussions and not the end can all
   take some patience.  Indeed, sometimes objection-based or issue-based
   decision making can be extremely difficult because there can be large
   factions who have diametrically opposed views.  And there is no doubt
   that we do see some amount of political compromise (that is, the
   undesirable kind of compromise) from time to time in the IETF.

   However, accepting these things has its price.  When we decide that a
   discussion is too factious and opt to simply go with a majority, it
   creates more polarized arguments in the future: Instead of working
   toward the best technical outcome that most everyone can accept,
   people are much quicker to run to opposing sides and dig in to their
   positions.  And when we allow real technical issues to drop because
   proponents have simply capitulated or have "horse-traded" to allow
   other technical problems to remain, the end product is weaker.
   Though the IETF can never be perfectly principled with regard to
   rough consensus, failing to be vigilant about sticking to the
   principles makes it increasingly hard to stick to them in the future,
   and ends us up with worse technical output.

   Again, coming to consensus is not the goal in itself.  Coming to
   consensus is what we do during our processes to arrive at the best
   solution.  In particular, "declaring" consensus is not an end goal.
   Attempts to declare consensus at the end of a discussion just for the
   sake of being able to say that there is consensus often get us back
   into the voting mentality that we're trying to avoid.





Resnick                       Informational                    [Page 13]


RFC 7282                      On Consensus                     June 2014


   We often hear chairs say that they are making a "consensus call".
   Sometimes, they simply mean they are making a call _of_ the
   consensus; that is, they are declaring the consensus that has, in
   their view, been reached when the discussion has reached an end.
   That's a fine thing and what chairs are supposed to do: They are
   "calling" the consensus.  Sometimes, when a chair says that they are
   making a "consensus call", the chair is actually making a call _for
   discussion_ of a particular point in order to reach consensus.
   Although it's a bit odd to call that a "consensus call" (as opposed
   to a "call for discussion" or the like), it is fine for a chair to
   occasionally identify a particular point of contention and get the
   group to focus discussion on it in order to reach consensus.  But
   more and more often, we hear chairs say that they are making a
   "consensus call" at the end of a discussion, where the chair will
   pose the classic "Who is in favor of choice A?  Who is in favor of
   choice B?" questions to the working group.  That's not really a
   "consensus call", and has the same potential problems as the "hum" at
   the end of a discussion: It can be tantamount to asking for a vote.
   Even talk of "confirming consensus" has this problem: It implies that
   you can confirm that there is consensus by counting people, not
   issues.  The important thing for a chair to do is to "call consensus"
   in the sense of declaring the consensus; others can always object and
   say that the chair has gotten the consensus wrong and ask for
   reconsideration.  However, the chair ought to be looking for
   consensus throughout the discussion, not asking for it at the end.

   There are some times where chairs will ask a question or take a poll
   toward the end of a discussion in order to figure out the state of
   consensus, but this must be done with extreme caution.  This is
   discussed in the next section.

6.  One hundred people for and five people against might not be rough
    consensus

   Section 3 discussed the idea of consensus being achieved when
   objections had been addressed (that is, properly considered, and
   accommodated if necessary).  Because of this, using rough consensus
   avoids a major pitfall of a straight vote: If there is a minority of
   folks who have a valid technical objection, that objection must be
   dealt with before consensus can be declared.  This also reveals one
   of the great strengths of using consensus over voting: It isn't
   possible to use "vote stuffing" (simply recruiting a large number of
   people to support a particular side, even people who have never
   participated in a working group or the IETF at all) to change the
   outcome of a consensus call.  As long as the chair is looking for
   outstanding technical objections and not counting heads, vote
   stuffing shouldn't affect the outcome of the consensus call.




Resnick                       Informational                    [Page 14]


RFC 7282                      On Consensus                     June 2014


   So, in a large working group with over 100 active participants and
   broad agreement to go forward with a particular protocol, if a few
   participants say, "This protocol is going to cause congestion on the
   network, and it has no mechanism to back off when congestion occurs;
   we object to going forward without such a mechanism in place", and
   the objection is met with silence on the mailing list, there is no
   consensus.  Even if the working group chair makes a working group
   "last call" on the document, and 100 people actively reply and say,
   "This document is ready to go forward", if the open issue hasn't been
   addressed, there's still no consensus, not even rough consensus.
   It's the existence of the unaddressed open issue, not the number of
   people, which is determinative in judging consensus.  As discussed
   earlier, you can have rough consensus with issues that have been
   purposely dismissed, but not ones that have been ignored.

   This brings us back to when a poll could be used (cautiously) at the
   end of a discussion.  Let's say a discussion has been ongoing for
   some time, and a particular objection seems to be holding up the
   decision.  A diligent chair who's been carefully listening to the
   discussion might think, "I have heard person X make this objection,
   and I've heard responses from many other folks that really address
   the issue.  I think we have rough consensus.  But the objection keeps
   coming up.  Maybe it's just the one person getting up again and again
   with the same argument, but maybe we don't have rough consensus.  I'm
   not sure."  At this point, the chair might ask for a hum.  If only a
   single hum objecting can be heard, even a loud one, in the face of
   everyone else humming that the objection has been answered, the chair
   has pretty good reason to believe that they heard the single
   objection all along and it really has been addressed.  However, to
   say immediately after the hum, "It sounds like we have rough
   consensus" and nothing else is at best being slipshod: What the chair
   really needs to say at that point is, "I believe the only objection
   we've heard is A (coming from person X), and I've heard answers from
   the group that fully address that issue.  So, unless I hear a
   different objection than the one I've just described, I find that
   there is rough consensus to move on."  That leaves the door open for
   someone to tell the chair that the objection was really on different
   grounds and they misevaluated, but it makes it clear that the chair
   has found rough consensus due to the discussion, not due to the hum.
   Again, it's not the hum that ends things, it's that the issues have
   been addressed.  If the small minority (even one person) still has an
   issue that hasn't been addressed, rough consensus still hasn't been
   achieved.

   Even if no particular person is still standing up for an issue, that
   doesn't mean an issue can be ignored.  As discussed earlier, simple
   capitulation on an issue is not coming to consensus.  But even in a
   case where someone who is not an active participant, who might not



Resnick                       Informational                    [Page 15]


RFC 7282                      On Consensus                     June 2014


   care much about the fate of the work, raises a substantive issue and
   subsequently disappears, the issue needs to be addressed before the
   chair can claim that rough consensus exists.

7.  Five people for and one hundred people against might still be rough
    consensus

   This one is the real mind-bender for most people, and certainly the
   most controversial.  Say there is a very small working group, one
   with half a dozen truly active participants who are experts in the
   field; everybody else is just following along but not contributing to
   the discussion.  The active folks come up with a protocol document
   that they all agree is the right way forward, and people inside and
   outside the working group agree that the protocol is likely to get
   widespread adoption; it is a good solution to a real problem, even if
   the non-experts don't have the ability to fully judge the details.

   However, one of the active members has an objection to a particular
   section: The protocol currently uses a well-known algorithm to
   address an issue, but the objector has a very elegant algorithm to
   address the issue, one which works especially well on their
   particular piece of hardware.  There is some discussion, and all of
   the other contributors say, "Yes, that is elegant, but what we're
   using now is well-understood, widely implemented, and it works
   perfectly acceptably, even on the objector's hardware.  There is
   always some inherent risk to go with a new, albeit more elegant,
   algorithm.  We should stick to the one we've got."  The chair follows
   the conversation and says, "It sounds like the issue has been
   addressed and there's consensus to stick with the current solution."
   The objector is not satisfied, maybe even saying, "But this is silly.
   You've seen that my algorithm works.  We should go with that."  The
   chair makes the judgement that the consensus is rough, in that there
   is still an objector, but the issue has been addressed and the risk
   argument has won the day.  The chair makes a working group last call.

   Then, the worst-case scenario happens.  The objector, still unhappy
   that their preferred solution was not chosen, recruits one hundred
   people, maybe a few who were silent participants in the working group
   already, but mostly people who work at the same company as the
   objector and who never participated before.  The objector gets them
   all to post a message to the list saying, "I believe we should go
   with the new elegant algorithm in section Z instead of the current
   one.  It is more elegant, and works better on our hardware."  The
   chair sees these dozens of messages coming in and posts a query to
   each of them: "We discussed this on the list, and we seemed to have
   consensus that, given the inherent risk of a new algorithm, and the
   widespread deployment of this current one, it's better to stick with
   the current one.  Do you have further information that indicates



Resnick                       Informational                    [Page 16]


RFC 7282                      On Consensus                     June 2014


   something different?"  And in reply the chair gets utter silence.
   These posters to the list (say, some of whom were from the company
   sales and marketing department) thought that they were simply voting
   and have no answer to give.  At that point, it is within bounds for
   the chair to say, "We have objections, but the objections have been
   sufficiently answered, and the objectors seem uninterested in
   participating in the discussion.  Albeit rough in the extreme, there
   is rough consensus to go with the current solution."

   Though the above example uses the most extreme form of recruiting
   sheer numbers of people (i.e., from the sales and marketing
   department), the same principle should hold true no matter how new or
   how credible the objectors seem: The chair is trying to discover
   whether objections have been addressed or if there are still open
   issues.  If, instead of a bunch of sales and marketing people, the
   new people to the conversation are developers or others who are
   directly involved in creating the technology, or even folks who have
   been participating the entire time whose knowledge of the technology
   is not in question at all, the principle is still the same: If the
   objection has been addressed, and the new voices are not giving
   informed responses to that point, they can still justifiably be
   called "in the rough".  Of course, the more involved and knowledgable
   the objectors are, the more difficult it will be for the consensus
   caller to make the call, but a call of rough consensus is reasonable.
   The chair in this case needs to understand what the responses mean;
   only sufficiently well-informed responses that justify the position
   taken can really "count".

   There is no doubt that this is the degenerate case and a clear
   indication of something pathological.  But, this is precisely what
   rough consensus is ideally suited to guard against: vote stuffing.
   In the presence of an objection, the chair can use their technical
   judgement to decide that the objection has been answered by the group
   and that rough consensus overrides the objection.  Now, the case
   described here is probably the hardest call for the chair to make
   (how many of us are willing to make the call that the vast majority
   of people in the room are simply stonewalling, not trying to come to
   consensus?), and, if appealed, it would be incredibly difficult for
   the appeals body to sort out.  Indeed, it is likely that if a working
   group got this dysfunctional, it would put the whole concept of
   coming to rough consensus at risk.  But still, the correct outcome in
   this case is to look at the very weak signal against the huge
   background noise in order to find the rough consensus.








Resnick                       Informational                    [Page 17]


RFC 7282                      On Consensus                     June 2014


8.  Conclusion

   Although this document talks quite a bit about the things chairs,
   working groups, and other IETF participants might do to achieve rough
   consensus, this document is not really about process and procedures.
   It describes a way of thinking about how we make our decisions.
   Sometimes, a show of hands can be useful; sometimes, it can be quite
   damaging and result in terrible decisions.  Sometimes, using a device
   like a "hum" can avoid those pitfalls; sometimes, it is just a poorly
   disguised vote.  The point of this document is to get all of us to
   think about how we are coming to decisions in the IETF so that we
   avoid the dangers of "majority rule" and actually get to rough
   consensus decisions with the best technical outcomes.

9.  Security Considerations

   "He who defends with love will be secure." -- Lao Tzu

10.  Informative References

   [Clark]    Clark, D., "A Cloudy Crystal Ball - Visions of the
              Future", Proceedings of the Twenty-Fourth Internet
              Engineering Task Force, pages 539-543, July 1992,
              <http://www.ietf.org/proceedings/24.pdf>.

   [RFC1603]  Huizer, E. and D. Crocker, "IETF Working Group Guidelines
              and Procedures", RFC 1603, March 1994.

   [RFC2418]  Bradner, S., "IETF Working Group Guidelines and
              Procedures", BCP 25, RFC 2418, September 1998.

   [Sheeran]  Sheeran, M., "Beyond Majority Rule: Voteless Decisions in
              the Religious Society of Friends", ISBN 978-0941308045,
              December 1983.

















Resnick                       Informational                    [Page 18]


RFC 7282                      On Consensus                     June 2014


Appendix A.  Acknowledgements

   This document is the result of conversations with many IETF
   participants, too many to name individually.  I greatly appreciate
   all of the discussions and guidance.  I do want to extend special
   thanks to Peter Saint-Andre, who sat me down and pushed me to start
   writing, and to Melinda Shore for pointing me to "Beyond Majority
   Rule" [Sheeran], which inspired some of the thinking in this
   document.

Author's Address

   Pete Resnick
   Qualcomm Technologies, Inc.
   5775 Morehouse Drive
   San Diego, CA  92121
   US

   Phone: +1 858 651 4478
   EMail: presnick@qti.qualcomm.com































Resnick                       Informational                    [Page 19]