RFC 7432, "BGP MPLS-Based Ethernet VPN", February 2015

Note: This RFC has been updated by RFC 8584, RFC 9161

Errata ID: 5746
Status: Rejected
Type: Technical
Publication Format(s) : TEXT
Reported By: Yang Huang
Date Reported: 2019-06-05
Rejected by: Martin Vigoureux
Date Rejected: 2019-06-17

Section 11.2 says:

11.2.  P-Tunnel Identification
"...+ If the PE that originates the advertisement uses ingress 
replication for the P-tunnel for EVPN, the route MUST include the
PMSI Tunnel attribute with the Tunnel Type set to Ingress
Replication and the Tunnel Identifier set to a routable address of
the PE."

It should say:

a routable address of the PE is not so strict. And does this mean 
we use the Tunnel Identifier to construct P2P tunnel for ingress 
replication, or we use the Originating Router's IP Address in the 
IMET route key, or they are equivalent meaning?
This may cause interact problems when it implements differently. 
Could you clarify this? Thanks.

Notes:

--VERIFIER NOTES--
Errata is not the place to ask questions for clarifications

Report New Errata